Raspberry Pi Forums

MarkNic

Thanks

MarkNic

I have just bought the codecs from raspberry and cant seem to get them enabled. I've followed the steps given in the email but to no avail, I've used the RPi command, I've SSH'd to the RPi and yet still no luck. I'm running XBMC through Raspbmc and have tied to input the codes in the Raspbmc setting...

MarkNic

Is there a way of getting Navi x on my raspberry without using a usb stick? I wondered if it was possible through the command prompt or not?

Thanks.

MarkNic

With the "add DVB network by location" do i select all these and let it find the muxes? Or are their certain 1s for the uk?

Always something to confuse me!

MarkNic

Just Rebooted and tried to find my adaptor (SkyStar) and its there

Thank you soooo much!

I'll reply with whether the channels and signal works or not once i've received my codecs from raspberrypi.org.

MarkNic

Right i now have this when i did exactly what you said. usb 1-1.2.3: new high-speed USB device number 7 using dwc_otg usb 1-1.2.3: New USB device found, idVendor=14f7, idProduct=0500 usb 1-1.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 technisat-usb2: set alternate setting dvb-usb: ...

MarkNic

Sorry but i idnt understand the last part, "better directly to the RPi using wge"

Thanks.

Im going to format my sd card and start from scratch.

MarkNic

So I've gone wrong somewhere in "installing" the firmware or drivers? It's so irritating not being able to get it working because other people have managed it but no1 has put how they managed it.

MarkNic

Bump...

MarkNic

This is what i get.

MarkNic

Ive found this also - http://linuxtv.org/wiki/index.php/DVB_via_USB

But it still isnt making sense to me.

MarkNic

looking at the last bit of the codes, mine looks like its de initialized and disconnected, But it needs to be connected???

I feel like im so close now to getting it sorted out!

MarkNic

I didnt type "snd-bcm2835" and after saving i put dmesg and its the same message. (in the picture)

MarkNic

Should i type "snd-bcm2835" in aswell or not?

Thank you and sorry.

MarkNic

i managed to save it does this look about right?

MarkNic

So i typed Sudo nano /ect/modules and a box appeared so i typed dvb-usb-technisat-usb2 and now i dont understand the options so "save" it :S

The options are in the picture.

Thank you for being so patient with me not understanding most of it lol.

MarkNic

This is what comes up when i typed dmesg

MarkNic

The picture is what happens when i type that into the command line.

I had to enable it by adding the line:
dvb-usb-technisat-usb2
to /etc/modules

I didnt understand this part, Sorry.

Thanks.

MarkNic

Right so ive been on a couple of other forums and someone has pointed out this to me from a site. Drivers Drivers are included in Linux Mainline since 2.6.39 (or earlier). The device can be found here Device Drivers -> Multimedia support -> DVB/ATSC adapters -> Support for various USB DVB devices ->...

MarkNic

Ok thanks for your help. I'm still a little clueless lol. I'll keep having a look. Thank you

MarkNic

Now i have downloaded the firmware into the "/lib/firmware/" folder do i need to somehow "install" or Make the raspberry know the firmware is there somehow?

MarkNic

Yes im running xbmc through raspbmc. So do you think it could be that the firmware i thought id managed to download into the firmware folder that may be missing or something?

Any help is good help, always learning something.

Thanks.

MarkNic

Hey, thanks for your reply. I type lsusb and it comes back as: pi@raspbmc:~$ lsusb Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. Bus 001 Device 004: ID 1997:1221...

MarkNic

I used a program called "putty" to get a command line up on my laptop for for the raspberry the changed the directory to /lib/firmware then used the link sudo wget http://kernellabs.com/firmware/technisat-usb2/dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw for the firmware, it said it downloaded but i cant...

MarkNic

I think i have managed to install the firmware, Not 100% sure but im guessing it worked since i didnt receive any errors, i cant seem to find any adaptors on tvheadend though. Help please

Search found 26 matches

Re: MPG2 and VC1 codecs not working.

MPG2 and VC1 codecs not working.

Navi X on Raspbmc

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD

Re: Technisat SkyStar USB HD