Raspberry Pi Forums

Hayden_James

Yes for this initial release you need a version of DISM that only works with Windows 10 Insider Preview, but we will be making the installation more flexible soon! Pranish Kumar (pranishk@microsoft.com) Microsoft Corporation ... I left Windows over a decade ago for reasons similar to this, restrict...

Hayden_James

Transparent Raspberry Pi ABS case + 3 Heat Sinks
$9.99 - Free shipping: http://www.ebay.com/itm/281388522231

Hayden_James

Raspberry Pi B+... thank you!

Hayden_James

when I visit that link it ask me... business or personal? I click personal and price is £5.71. I tried to buy as business but it requires a minimum checkout of £20 or $34 USD. So I cleared cookies tried to buy as personal and warns that it can't ship only 1. I try to buy 2 but shipping is only to th...

Hayden_James

Where can I find this transparent case for less:
http://www.ebay.com/itm/Rare-Transparen ... 1388522231

I found one similar but its frosted not transparent like this one. Anyone have any links?

Hayden_James

I'm over clocked and over volted but without heak sinks AND fan, temps were close to 80c constantly (in a closed Cyntech case!) Now with sink + fan runs around 50c. One important point many miss is that heat sinks in closed top cases without fan is pointless, because hot air is trapped. Also if you ...

Hayden_James

Hi, fiq_split_enable=0 gives me a much worse distortion fiq_fix_enable=0 gives me an unbootable system (didn't investigate) speed=1 slowes down my Wi-Fi dongle and forces the sound card to enter a stereo-only mode, which is not what I meant to use it for. But it plays fine. Please advise if I have ...

Hayden_James

Can somebody confirm if the answer provided by @pepedog (in this other post here http://www.raspberrypi.org/phpBB3/viewtopic.php?f=53&t=57805#p436434) also solves the issue described earlier in this thread? I've been experiencing this issue with several dongles, including the Edimax and D-Link. No ...

Hayden_James

None. I've read enough recent deadend threads to realize it makes no sense posting spcifics just to go in circles. Plus I'm posting via mobile today, I will blog post a video of the issue in action once I get back.

Cheers!

Hayden_James

Yes latest firmware. Properly powered. all depends on what your using the Pi for, USB still flawed. Using a 2.1 amp, 2.0 amp and 1.5 amp and 3 USB wifi dongles. (3 RPi board, I thought I had bad hardware, trchincall I do... All three) Glad it works for your needs it works fine for some of mine as we...

Hayden_James

Sooooo many USB problem related threads. No fixes. :/

Hayden_James

I've finally found this thread. USB is just flawed: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=12097 "The power supply advice is forming a smokescreen across the biggest Pi issue. The USB system is broken. Put a traffic load on a network (eth0, or a 3G stick if you are lucky to get it co...

Hayden_James

I've finally found this thread. USB is just flawed: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=12097 "The power supply advice is forming a smokescreen across the biggest Pi issue. The USB system is broken. Put a traffic load on a network (eth0, or a 3G stick if you are lucky to get it co...

Hayden_James

also trying to solve same issue.

Hayden_James

Don't want to cut an paste the same post so see my post here for possible fix using 2013/10/29 driver: http://www.raspberrypi.org/forum/viewto ... 30#p495730

Hayden_James

Great news Bjoern. I should have said that the change has improved the latency issues. But the problem is still there. :/ As per this thread: http://www.raspberrypi.org/forum/viewtopic.php?f=36&t=62549&p=494327#p494327 ... 1/2 the time its IRQ related or pings and packet loss escalate with IRQs. But...

Hayden_James

@rpifreeze You are correct. Same issues here. Once I start any serious download or upload IRQs spike big time and ping latency increases to over 1 - 5 seconds sometimes even long enough to lose ssh connection... There's lots of free RAM as seen in attachment (had to compress image so much to fit the...

Hayden_James

Hi I'm a Pi noob! What are the most common benchmarking tools being used for tracking performance of the Raspberry Pi ? I found nbench by searching the forums. Here are my nbench results, I'm running Arch Linux ARM: [root@Arch]# ./nbench BYTEmark* Native Mode Benchmark ver. 2 (10/95) Index-split by ...

Hayden_James

I've uploaded a small simple Arch Linux ARM + creap_ap based image for turning your Raspberry Pi into a WiFi Access point. I've been using it as my wireless Internet router at home since my WRT when dead... http://haydenjames.io/download-arch-linux-raspberry-pi-wifi-access-point-setup/ Included in ...

Hayden_James

hmm... Why would/should one do this?

Hayden_James

try disabling power management from the adapter. that worked for me.

Hayden_James

Yes I figured, as is the norm with forums and spam, thanks. Background: The other account I created I could not login afterwards because of the message: "...this board requires account activation, an activation key has been sent to the e-mail address you provided. Please check your e-mail for furthe...

Hayden_James

yes. Here's a link to the blog of someone who got it working... http://stevenhickson.blogspot.com/2013/06/playing-youtube-videos-in-browser-on.html I'm going to try this. I've been playing with gnash + Modori and gnash + Chromium (I know heavier, but wondered if it was a gnash +Modori issue) and it...

Hayden_James

HI all, I'm new here will be searching the forums heavily as I have lots of questions and looking for tips. I tried to register here 2 days ago but didn't receive the confirmation email. Maybe because I wasn't using my gmail account and instead used my domain email. I tried to email support to ask b...

Search found 24 matches

Re: Setup without Windows 10 PC

Transparent Raspberry Pi ABS case + Heatsinks: $9.99

Re: NAT and high IRQ load

Re: Super transparent case. Where can I buy this for less?

Super transparent case. Where can I buy this for less?

Re: Heat Sinks, Do YOU need them.

Re: USB FIQ testing....

Re: Slow SSH and SFTP over WiFi

Re: USB/serial converters (not very) broken on Pi

Re: USB/serial converters (not very) broken on Pi

Re: USB/serial converters (not very) broken on Pi

Re: NAT and high IRQ load

Re: help needed to diagnoze frequent freezes

Re: help needed to diagnoze frequent freezes

Re: NAT and high IRQ load

Re: High latency with Edimax 7811Un

Re: NAT and high IRQ load

nbench benchmarking alternatives?

Downloable Raspberry Pi WiFi Access Point Image

Re: Tutorial for updating R-Pi firmware in ARCH LINUX

Re: High latency with Edimax 7811Un

Re: New here, tried to signup b4

Re: YouTube and videos

New here, tried to signup b4