Go to advanced search

by michaelkrtikos
Mon Apr 10, 2017 10:30 pm
Forum: Troubleshooting
Topic: RPi 2 as Wireless AP problem
Replies: 6
Views: 755

Re: RPi 2 as Wireless AP problem

Try this recipe: https://www.raspberrypi.org/documentation/configuration/wireless/access-point.md it should work with a RPi2B if you change driver=nl80211 to the driver for your WiFi adapter. Hello There! Followed the guide, it is a success! I have managed to create a wireless access point and conn...
by michaelkrtikos
Mon Apr 10, 2017 4:10 pm
Forum: Troubleshooting
Topic: RPi 2 as Wireless AP problem
Replies: 6
Views: 755

Re: RPi 2 as Wireless AP problem

One question, how do i know what wifi driver is being used? I have an AirTies WUS-201 and to make it work i installed the firmware-zd2111. What should i write as a driver to the configuration? According to https://wikidevi.com/wiki/Airties_WUS-201 it has a ZD1211 (not 2111). That is an ancient b/g ...
by michaelkrtikos
Mon Apr 10, 2017 5:44 am
Forum: Troubleshooting
Topic: RPi 2 as Wireless AP problem
Replies: 6
Views: 755

Re: RPi 2 as Wireless AP problem

Try this recipe: https://www.raspberrypi.org/documentation/configuration/wireless/access-point.md it should work with a RPi2B if you change driver=nl80211 to the driver for your WiFi adapter. Hi, thanks for the link. I will give it a try when back home from work. One question, how do i know what wi...
by michaelkrtikos
Sun Apr 09, 2017 11:06 pm
Forum: Troubleshooting
Topic: RPi 2 as Wireless AP problem
Replies: 6
Views: 755

RPi 2 as Wireless AP problem

Guys hello, Please for your help as i am trying to solve this for days and i cannot. I have followed this tutorial to create a WiFi Access Point with my RPi 2: http://xmodulo.com/raspberry-pi-wifi-access-point.html I can see the network created but i cannot connect to it because udhcpd doesn't start...
by michaelkrtikos
Sun Feb 19, 2017 11:02 pm
Forum: Raspberry Pi OS
Topic: RPi2 - Raspbian Jessie WiFi not working
Replies: 1
Views: 676

Re: RPi2 - Raspbian Jessie WiFi not working

Ok Guys i have found it... You need to install the zd1211 firmware using:

Code: Select all

sudo apt-get install firmware-zd1211
Writing it here if anyone else falls into that problem.

Thanks
by michaelkrtikos
Sun Feb 19, 2017 10:43 pm
Forum: Raspberry Pi OS
Topic: RPi2 - Raspbian Jessie WiFi not working
Replies: 1
Views: 676

RPi2 - Raspbian Jessie WiFi not working

Hello Guys, I would like some help making the WiFi to work on a Raspberry Pi 2 Model B. I am using a WiFi dongle from AirTies WUS-201 which is based on chipset: Zydas chipset (ZD1211B). Let me just mention that i have BerryBoot and i have installed OpenElec and Ubuntu MATE along with Raspbian and on...
by michaelkrtikos
Thu Mar 13, 2014 3:37 pm
Forum: Advanced users
Topic: BerryBoot custom OS addition! HELP
Replies: 8
Views: 6806

Re: BerryBoot custom OS addition! HELP

Anyone please?
by michaelkrtikos
Wed Mar 12, 2014 3:42 pm
Forum: Advanced users
Topic: BerryBoot custom OS addition! HELP
Replies: 8
Views: 6806

Re: BerryBoot custom OS addition! HELP

Hello Everyone, i would like to ask a question regarding Berryboot. For 2 days now i am trying to add an OpenELEC nightly built to BerryBoot menu. What i have done is the following: I have downloaded the built image file. On a linux machines i tried the following instructions: http://www.berrytermi...
by michaelkrtikos
Tue Mar 11, 2014 1:28 pm
Forum: Advanced users
Topic: BerryBoot custom OS addition! HELP
Replies: 8
Views: 6806

BerryBoot custom OS addition! HELP

Hello Everyone, i would like to ask a question regarding Berryboot. For 2 days now i am trying to add an OpenELEC nightly built to BerryBoot menu. What i have done is the following: I have downloaded the built image file. On a linux machines i tried the following instructions: http://www.berrytermin...
by michaelkrtikos
Fri Feb 14, 2014 5:34 pm
Forum: Troubleshooting
Topic: wireless mirroring tv with raspberry
Replies: 3
Views: 878

Re: wireless mirroring tv with raspberry

Thx for the reply and link! However i'm not sure if this is a solution because they state the Airtame would make the PI a "client". Doesn't this mean that the Pi is the receiver of hdmi content from another source and not the source itself sending hdmi content? (confused :? ) I really didn't have t...
by michaelkrtikos
Wed Feb 12, 2014 10:50 pm
Forum: Troubleshooting
Topic: wireless mirroring tv with raspberry
Replies: 3
Views: 878

Re: wireless mirroring tv with raspberry

If i understand well you want to share your raspberry pi screens to multiple monitors. You may have a look on the following: http://www.indiegogo.com/projects/airtame-wireless-hdmi-for-everyone--2 It is only on pre-order stage and it costs 99$ (within the price range you would like to pay). Also on ...
by michaelkrtikos
Mon Feb 03, 2014 12:13 pm
Forum: General discussion
Topic: Raspberry Pi Control Panel - A PHP Control Panel
Replies: 16
Views: 14771

Re: Raspberry Pi Control Panel - A PHP Control Panel

I don't think it has to do something with RaspBMC and Raspbian, because EVERYTHING that is executed over PHP is executed with the user www-data. That has nothing to do with root. The default user on RaspBMC is Pi, root has no password. Can you try what a ls -l /opt/vc/bin/vcgencmd does output for y...
by michaelkrtikos
Sun Feb 02, 2014 8:34 pm
Forum: General discussion
Topic: Raspberry Pi Control Panel - A PHP Control Panel
Replies: 16
Views: 14771

Re: Raspberry Pi Control Panel - A PHP Control Panel

It works... So on Raspbian, you need to modify the command that gets the voltage in index.php like the following: $voltage = shell_exec('sudo /opt/vc/bin/vcgencmd measure_volts'); $voltage = explode("=", $voltage); $voltage = $voltage[1]; $voltage = substr($voltage,0,-2); Note that the command has c...
by michaelkrtikos
Sun Feb 02, 2014 7:35 pm
Forum: General discussion
Topic: Raspberry Pi Control Panel - A PHP Control Panel
Replies: 16
Views: 14771

Re: Raspberry Pi Control Panel - A PHP Control Panel

The problem with the voltage was the sudoers. It appeared when i changed the command to: www-data ALL=NOPASSWD: ALL I have added also free memory and used memory to the scripts from the script i attached above. Well, that is some bad thing you've done there. What this does is to allow the user www-...
by michaelkrtikos
Sun Feb 02, 2014 6:06 pm
Forum: General discussion
Topic: Raspberry Pi Control Panel - A PHP Control Panel
Replies: 16
Views: 14771

Re: Raspberry Pi Control Panel - A PHP Control Panel

Fixed also that... Now it looks like this: http://imageshack.com/a/img835/5983/l0fv.png I need to adjust the position of the voltage a bit from the main.css and it will be done. The problem with the voltage was the sudoers. It appeared when i changed the command to: www-data ALL=NOPASSWD: ALL I have...
by michaelkrtikos
Sun Feb 02, 2014 3:26 pm
Forum: General discussion
Topic: Raspberry Pi Control Panel - A PHP Control Panel
Replies: 16
Views: 14771

Re: Raspberry Pi Control Panel - A PHP Control Panel

As far as i know i had no problems with Chromium Browser either. But i will look into it later, maybe i find something to fix your errors too. I used Chrome and Internet Explorer on Windows, Firefox and chromium on Ubuntu Linux, Midori on the Pi and Safari on iPad and iPhone. All of them could not ...
by michaelkrtikos
Sun Feb 02, 2014 11:34 am
Forum: General discussion
Topic: Raspberry Pi Control Panel - A PHP Control Panel
Replies: 16
Views: 14771

Re: Raspberry Pi Control Panel - A PHP Control Panel

I fixed it... For me the problem was on the index.php and on the script code (the gauges). In the original file the script opens and all the gauges are included. It didn't work. So I closed every gauge with </script> This was the only way. I still cannot appear the voltage... Keep looking... It woul...
by michaelkrtikos
Sun Feb 02, 2014 1:43 am
Forum: General discussion
Topic: Raspberry Pi Control Panel - A PHP Control Panel
Replies: 16
Views: 14771

Re: Raspberry Pi Control Panel - A PHP Control Panel

BTW, i am running Raspbian...
by michaelkrtikos
Sat Feb 01, 2014 10:01 pm
Forum: General discussion
Topic: Raspberry Pi Control Panel - A PHP Control Panel
Replies: 16
Views: 14771

Re: Raspberry Pi Control Panel - A PHP Control Panel

Thanks for the reply, Let me have a look and i will post back! EDIT: I have fixed the reboot and shutdown buttons with your help but i still cannot fix the gauges. They refuse to appear even if i have checked all my browser settings on Chrome and internet explorer. I even downloaded the Justgage on ...
by michaelkrtikos
Sat Feb 01, 2014 6:00 pm
Forum: General discussion
Topic: Raspberry Pi Control Panel - A PHP Control Panel
Replies: 16
Views: 14771

Re: Raspberry Pi Control Panel - A PHP Control Panel

Hello my friend... It is exactly what i was looking for... I cannot set it up though... I have installed lighttpd and php on my system and i place the files in the /var/www folder. I needed to change the default port since on port 80 i have another server running. So after this change i typed the fo...
by michaelkrtikos
Fri Jan 24, 2014 10:12 am
Forum: Beginners
Topic: New Idea and advise please!
Replies: 1
Views: 579

New Idea and advise please!

Hello everybody, Today i came up with another idea and i would like your advise. I run the following on the raspberry pi as we speak: 1) Samba server (for access to my drives via windows at home) 2) WebDAV server (Barracuda Drive for access to my files from anywhere else) 3) XRDP desktop (to be able...
by michaelkrtikos
Thu Jan 23, 2014 4:19 pm
Forum: Python
Topic: Python Info Script
Replies: 8
Views: 2801

Re: Python Info Script

Done... Final Version: # coding=utf-8 import os import smtplib import statvfs from datetime import timedelta from email.mime.text import MIMEText #Read the systems uptime: with open('/proc/uptime', 'r') as f: uptime_seconds = float(f.readline().split()[0]) # At First we have to get the current CPU-T...
by michaelkrtikos
Thu Jan 23, 2014 1:23 pm
Forum: Python
Topic: Python Info Script
Replies: 8
Views: 2801

Re: Python Info Script

Done, I did this with the following line: GB = (1024 * 1024) * 1024 USBHDD1 = os.statvfs ("/media/USBHDD1") freeHDD1 = (USBHDD1.f_frsize * USBHDD1.f_bfree) /GB USBHDD2 = os.statvfs ("/media/USBHDD2") freeHDD2 = USBHDD2.f_frsize * USBHDD2.f_bfree / GB I also added the system uptime values. One last q...
by michaelkrtikos
Thu Jan 23, 2014 8:33 am
Forum: Python
Topic: Python Info Script
Replies: 8
Views: 2801

Re: Python Info Script

Thank you very much all for the help. With your help, i am now able to read the drives free space correctly in bytes. Here is the version of the script: # coding=utf-8 import os import smtplib import statvfs from email.mime.text import MIMEText # At First we have to get the current CPU-Temperature w...
by michaelkrtikos
Wed Jan 22, 2014 6:43 pm
Forum: Python
Topic: Python Info Script
Replies: 8
Views: 2801

Python Info Script

Hello Everyone, I would like some help with a python script that i came up using parts of code i found on internet. Unfortunately it is my first script and i do not have programming experience so please help me with this one. The intention is to send mail notifications and inform me about the temper...

Go to advanced search