Raspberry Pi Forums

Seiduna

bump, sorry and thank you.

Seiduna

Hello RPi people, I have two questions, first: I have official touchscreen, and on it rpi 4. I still have 2 micro hdmi outputs free, could I use them along touchscreen? (Right now I do NOT have a cable to simply try, so I kindly ask, before buying) And second: the only thing preventing me replacing ...

Seiduna

Hellp RPi people, got my rpi4 4gb version, yeeey! First thing, all apps are using locale language and i want english. I believe it was initial setup that led me to this unfortunate position, i did try sudo raspi-config to change system language (that en_us.utf-8ish, and my locale language) and set e...

Seiduna

Hello HawaiianPi, thanks for your time and input.

So you have newer rpi3 and still "choppy"?
hmmm...

Is there any documentation, or guides, that can tell us how much can we connect to rpi over bluetooth?

Thank you.

Seiduna

Hello RPI people, I was not sure where to post my question, sorry admin if I missed. So I have rpi3 (old one) and official display, and it rocks. I use official OS (the one with road wallpaper) and I have bluetooth mouse that I connect. Now I bought bluetooth speaker, and it took some time to set it...

Seiduna

hey guys, hello there, IdahoWalker, I was thinking if there was some order to avoid catastrophe, thank you. pcManBob, oh, just corrupted sd? that is kind of good news... Anyway, I decided that my idea is not a good one, kheh, I rather take time (which I was hoping to cut) and open case, connect the ...

Seiduna

Hey pcManBob, aha, spikes, and wrong connections... my problem is this, I have rpi 3 with official display and case, and I was thinking on having pre-prepared wires with male/female connectors so I can just connect gps wire's male connector to rpi's gpio wires with female connector, no need to open ...

Seiduna

Hello, This is to be noob question. Let's say, I have gps and it has 3 wires, 3V, ground and signal, and I connect them to rpi's gpio pins, and power rpi on. All works fine, I shutdown rpi and disconnect gps. But what if I turn on rpi, and while rpi is running I connect gps wires? And when done, dis...

Seiduna

Dougie hey, hello again,

Your answer is short and sweet, thank you very much for your input, can't wait for weekend to try it out.

Thank you and kind regards

Seiduna

Hey Dougie, hello,

Thank you for your answer and time.
Are there some info on how to do it, or I just plug it in (after I disconnect power connections between rpi3 and display)?

Thank you

Seiduna

Bump?

If I reframe the problem:
Can I power rpi3 and display separately?

Thank you

Seiduna

Hello RPi people, I have rpi3, with official foundation display, and official 5.1V 2.5A charger and camera board. Working great. I am interested in making it portable, like, to charge it with power bank. There are some power banks out there that clame up to 3A output, but they usually have two or ev...

Seiduna

hello guys, earlier today I managed to get on irc at #raspberrypi, where I was told that if I use 32 bit arch on rpi3 I should be fine. That kernel should have all drivers and such stuff. (noob terminology here) so procount, your post warms my hart confirming that it works on almost 50 distros, but ...

Seiduna

Hello rpi people, I am thinking of finally getting rpi official display, but I am interested, does it depends on raspbian? My flavour of choice is usually arch, but searching the web I could find instructions only for raspbian. So my question is, can I combine rpi official display with arch os ? (If...

Seiduna

Hello rpi people I just got my zero w and camera v2, got jessie light on sd, wrote wpa_supplicant.cong and ssh in boot, and it worked as charm! I took a picture, very nice. Than I installed apache and php, works fine. Here I should notice that https://www.raspberrypi.org/documentation/remote-access/...

Seiduna

hello again dezaF, well this works, great, thanks, but there are some issues with this, I use http://elinux.org/RPi-Cam-Web-Interface if I don't set password for cam 1 and 2 there is no need of protected directory... As I understand, and bare in mind, I am no expert, even if I do set up password for...

Seiduna

hello there dezaF, thank you for your time and input. but, if I open port X for my camera 1, than accessing it i would go 123.456.789.012:portX and for camera 2 port Y accordingly 123.456.789.012:portY, wouldn't that require two separate windows in browser? I set 2 iframes to harness both cameras on...

Seiduna

Hello rpi people, I set up raspberry pi b as server, I have arch running on it. I, think, I set router right, gave my rpi permanent LAN address, and from outside it works! Let's call this rpi server rpi. It is connected to router with cable. Now I have several rpis, two of which I set up with camera...

Seiduna

hello rpi people, i got me a gps (GP-20U7) i have rpi a 2 i set it up and here is less than a minute video of it: https://www.youtube.com/watch?v=gAAH7OyVOI8 the rig is set in the middle of the garden, plenty of sky commands used: sudo killall gpsd stty -F /dev/ttyAMA0 4800 #also tried 9600 cat /dev...

Seiduna

Thank you Dougie, just made my holiday

Hey RareHare, I was wondering what kind of connection was daisy-chaining, me not being native English speaker, left alone i am new to electronics, but i understand parallel.

Thank you both for your time and input.

Seiduna

Hello again Dougie, once again to the rescue, thank you.

That is great news, and now to juicy part,
where can i find wiring examples, circuits,
or is it simple as just connecting it in parallel to rpi's pins?

thank you

Seiduna

Hello there,

so this is more of beginners question,
i already have 2 MCP23017 chips on one rpi,
now i want to buy a HMC5883L digital compass,
but it also requires i2c pins.

can i have compass along MCP's and how would i wire that on breadboard?

Thank you

Seiduna

Hello rpi people, hope i'm in the right section So i've set up a webcam on one of my rpi and installed motion, and other rpi for monitoring the front door (suckless surf browser). The thing is, that on other rpi (where i monitor) the RAM gets filled up quickly with pictures i receive (1 picture per ...

Seiduna

Hello rpi people, I have rpi, on it kodi, and i also have ir receiver and remote, works great. (So no keyboard) Now i want to make buttons to control kodi (if IR remote controller battery runs out, or if I misplace IR remote). I need 13 buttons (momentary switches), so I use mcp23017 IO expander, wi...

Seiduna

Hey mattmiller,

I see, I had in mind space estate, to keep it small as possible, but that link of yours is so cheap i might do just that.

Thank you again matt!

Search found 109 matches

Re: wi-fi applet command and touchscreen monitor(s) combo

wi-fi applet command and touchscreen monitor(s) combo

pri4, language, dwm and dock plugins.

Re: How many bluetooth devices can I connect? rpi3

How many bluetooth devices can I connect? rpi3

Re: gpio and running pi

Re: gpio and running pi

gpio and running pi

Re: Rpi3 with display, powered separatly?

Re: Rpi3 with display, powered separatly?

Re: Rpi3 with display, powered separatly?

Rpi3 with display, powered separatly? [solved]

Re: Arch linux and official display

Arch linux and official display

RPi Cam Web Interface breaks apache [solved]

Re: Not streaming to outside world

Re: Not streaming to outside world

Not streaming to outside world [SOLVED]

raspberry pi (a2) and gps (GP-20U7)

Re: multuple i2c gadgets on one rpi

Re: multuple i2c gadgets on one rpi

multuple i2c gadgets on one rpi [SOLVED]

motion pictures take up ram

Control Kodi from gpio buttons

Re: stepper motors chip