Go to advanced search

by Twana94
Wed Jul 16, 2014 1:48 pm
Forum: Networking and servers
Topic: RaspRack
Replies: 9
Views: 24083

RaspRack

My Raspberry Pi project is called RaspRack. It is a 1U serverunit containing five Raspberry Pi, a networkswitch, an USB-hub and six fans. To power it it need one 12V and one 5V input. It also need a networkcable lto work properly. On the front there are 5 rectangular holes for SD-cards to be put in,...
by Twana94
Tue Mar 18, 2014 2:38 pm
Forum: Graphics, sound and multimedia
Topic: vlc automatic start at boot up
Replies: 14
Views: 31635

Re: vlc automatic start at boot up

Could this work if I want the raspberry pi to send a stream on the network. In my case I want to use the raspberry as a surveillance camera and watch the stream on a computer elsewhere.
by Twana94
Thu Nov 07, 2013 6:42 am
Forum: C/C++
Topic: Assign a GPIO as kernel LED trigger
Replies: 14
Views: 8963

Re: Assign a GPIO as kernel LED trigger

Copied the /home7pi/kernel/arch/arm/boot/zImage.img and replaced the old kernel and now the led1 shows in the /sys/class/leds/ directory, but the led does not blink like the OK Led. It's the exact same trigger in both of them, but the led1 is turned on all the time.
by Twana94
Thu Nov 07, 2013 6:20 am
Forum: C/C++
Topic: Assign a GPIO as kernel LED trigger
Replies: 14
Views: 8963

Re: Assign a GPIO as kernel LED trigger

Are you using raspbian? If so, I would suggest the following. First set up an environment to compile a new kernel, this link will help. http://elinux.org/RPi_Kernel_Compilation . You could always do the compilation on the pi itself but I suggest setting up a cross-compiler and using a more powerful...
by Twana94
Mon Oct 21, 2013 11:17 am
Forum: General programming discussion
Topic: Custom Case indicator LEDs
Replies: 13
Views: 19338

Re: Custom Case indicator LEDs

I also have a project like this where I want to program one of the GPIOs to send the same signals, that GPIO16 send to the ACT LED, to a LED on my chassis. Have been searching the internet several days now but haven't found anything useful. I have a simple code that makes a LED blink but thats not r...

Go to advanced search