Go to advanced search

by itsmedoofer
Tue Jun 25, 2019 7:24 pm
Forum: Camera board
Topic: RPi Cam Web Interface
Replies: 4959
Views: 1234047

Re: RPi Cam Web Interface

HI,

Just a heads up the installer does not work with the new "Buster" images, missing packages..

I
by itsmedoofer
Mon Jun 24, 2019 12:06 pm
Forum: Raspbian
Topic: Raspbian 'Buster' 2019-06-20
Replies: 67
Views: 2901

Re: Raspbian 'Buster' 2019-06-20

Although somebody did do a successful upgrade from Stretch to Buster, we do not recommend it and have not published how to do it. It may happen. I took a punt and updated my Lite image running RPiCam-Interface, it wasn't without issues, however I am now running Buster. The were the usual questions ...
by itsmedoofer
Mon Jun 17, 2019 8:47 am
Forum: General discussion
Topic: Pi 1B Active Cooling case
Replies: 1
Views: 142

Re: Pi 1B Active Cooling case

Hi, Thought I would follow up in case anyone else had the need, I didn’t find a commercial case, however I did find this on Thingverse that I could 3D print. https://www.thingiverse.com/search?sort=relevant&q=raspberry+pi+model+b+case+30mm&type=things&dwh=735d074fdb103a5 I fitted the Pi with a small...
by itsmedoofer
Thu May 30, 2019 11:32 am
Forum: Networking and servers
Topic: Installing OpenVPN on a Pi
Replies: 3
Views: 396

Re: Installing OpenVPN on a Pi

Nice write up, thanks for sharing. My 2p worth of contribution, if you are seeing poor speeds over your VPN connection try adding the following to your server.conf file sndbuf 393216 rcvbuf 393216 push "sndbuf 393216" push "rcvbuf 393216" I can pull 20Mbit/S using my Pi2 basically maxing out the ups...
by itsmedoofer
Tue May 28, 2019 11:46 am
Forum: Raspbian
Topic: Adjust screen size with OpenGL driver (vc4-kms-v3d)?
Replies: 13
Views: 4101

Re: Adjust screen size with OpenGL driver (vc4-kms-v3d)?

From memory you can force a FB resolution in /boot/config.txt , I have had to do this when running headless..

Code: Select all

# uncomment to force a console size. By default it will be display's size minus
# overscan.
framebuffer_width=1900
framebuffer_height=1024
by itsmedoofer
Tue May 28, 2019 11:38 am
Forum: Raspbian
Topic: Bind9 Update
Replies: 2
Views: 578

Re: Bind9 Update

I would like to update to bind version 9.11 because 9.11 has the Option "-L" which allows me to specify a general logfile which is used before the config file is parsed. How can I update to this version with apt-get? I don't want to compile it by myself or install an unsupported package. Hi, Have a...
by itsmedoofer
Tue May 28, 2019 6:31 am
Forum: Advanced users
Topic: Moving Linux kernel to 4.19
Replies: 255
Views: 66413

Re: Moving Linux kernel to 4.19

binaryhermit wrote:
Tue May 28, 2019 3:37 am
I can't help but think the pi2's update slipped through unnoticed and it'll be on 4.19 once rebooted?
Doh !! Just looked at the up time, 30 odd days, rebooted and I'm magically on 4.19 now.

I usually reboot after an update, must have got distracted here though, thanks for the top tip:)
by itsmedoofer
Fri May 24, 2019 10:49 am
Forum: Advanced users
Topic: Moving Linux kernel to 4.19
Replies: 255
Views: 66413

Re: Moving Linux kernel to 4.19

rpdom wrote:
Thu May 23, 2019 8:58 am
itsmedoofer wrote:
Thu May 23, 2019 7:47 am
Should we be seeing the 4.19 kernel when we do an apt update ?
It seems so. I just did an update and reboot on one Pi and it's now running 4.19.42

Is your Pi 2 running Raspbian Stretch?
Yea all on stretch.....
by itsmedoofer
Thu May 23, 2019 7:47 am
Forum: Advanced users
Topic: Moving Linux kernel to 4.19
Replies: 255
Views: 66413

Re: Moving Linux kernel to 4.19

Hi,

Should we be seeing the 4.19 kernel when we do an apt update ?

Two of my Pis are on 4.19 now, a Zero and Pi1B but the Pi2 is still on 4.14 with no sign of an update.

Have I missed something?
by itsmedoofer
Tue May 21, 2019 8:20 am
Forum: General discussion
Topic: Pi 1B Active Cooling case
Replies: 1
Views: 142

Pi 1B Active Cooling case

Hi, Bit of advice on a case required. I have repurposed a Pi 1B as a ADS-B receiver, the Pi is located in the apex of my garage, so I can get the aerial on the roof without a long cable run. I’m running the Pi quite hard, with a moderate overclcock I’m getting about 50-60% constant utilization, ordi...
by itsmedoofer
Wed Mar 20, 2019 12:44 pm
Forum: Beginners
Topic: How do i shrink a pre-made pi image
Replies: 1
Views: 77

Re: How do i shrink a pre-made pi image

These may help if... This will shrink a pre-made image:- https://github.com/Drewsif/PiShrink This will create an image from an SD card and then shrink it:- https://github.com/qrti/shrink In your case though, I think you will need to look at mounting an image on a Linux system and then deleting the c...
by itsmedoofer
Mon Mar 11, 2019 12:46 pm
Forum: Gaming
Topic: Retropie sound stuttering on Pi zero w
Replies: 2
Views: 372

Re: Retropie sound stuttering on Pi zero w

Hi, Have you tried to see what CPU load you are seeing, could be maxing out maybe ? I run my "RetroZero" with these overclock setting and generally don't see any issues... I use audio over HDMI tho... arm_freq=1100 gpu_freq=500 core_freq=500 sdram_freq=500 sdram_schmoo=0x02000020 over_voltage=6 sdra...
by itsmedoofer
Fri Feb 08, 2019 10:33 am
Forum: General discussion
Topic: Boot from HDD and boot wait times
Replies: 8
Views: 433

Re: Boot from HDD and boot wait times

Hi, As LTolledo says above,several of us have found that reboot success is dependent on the type of SATA -> USB chipset used in your adapter, there were discussions here https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=229228&p=1405530#p1405530 and here https://www.raspberrypi.org/forums/view...
by itsmedoofer
Thu Feb 07, 2019 2:57 pm
Forum: Python
Topic: Alternative module help
Replies: 0
Views: 86

Alternative module help

Hi, Does anyone know of a “Drop In” replacement for the python module weather-api https://pypi.org/project/weather-api/ ? Yahoo have been messing about with the weather API and have broken this module, there has been an issue raised on the GIT page but at this point it does not look like it going to...
by itsmedoofer
Thu Feb 07, 2019 2:02 pm
Forum: Gaming
Topic: Commodore PET Mini
Replies: 11
Views: 878

Re: Commodore PET Mini

Hi,

Fantastic !! I spend HOURS typing gauge measurement details into one of them many moons ago, next to it was an original Macintosh, I wasn't allowed on that though :)

I will have a look if it fits on our printer I will give it a go.

.
by itsmedoofer
Thu Feb 07, 2019 12:36 pm
Forum: Troubleshooting
Topic: Heads up - flightradar24
Replies: 3
Views: 290

Re: Heads up - flightradar24

No worries matey, thanks for the follow up..

I found it sometimes takes the fr24 feeder to, get up to speed, as it were, glad ya sorted anyway.
by itsmedoofer
Tue Feb 05, 2019 12:20 pm
Forum: Networking and servers
Topic: Web-server for website compatible with own cloud ?
Replies: 4
Views: 374

Re: Web-server for website compatible with own cloud ?

Val37 wrote:
Mon Feb 04, 2019 11:21 am
I actually use Apache for my web server.
So it is completely compatible, but I have to check for a tuto using Apache ?
thankssss
The Nextcloud tutorial by the same guy uses Apache, maybe use that instead ?
by itsmedoofer
Tue Feb 05, 2019 12:14 pm
Forum: Troubleshooting
Topic: Heads up - flightradar24
Replies: 3
Views: 290

Re: Heads up - flightradar24

Hi,

I noticed I had stopped feeding as well, a restart of the service fixed it for me though, I didnt notice any FR packages when I done an update, did you read this somewhere ?

Ta,
by itsmedoofer
Wed Jan 23, 2019 12:36 pm
Forum: Raspbian
Topic: USB Ethernet Adapter Prevents USB Boot
Replies: 7
Views: 422

Re: USB Ethernet Adapter Prevents USB Boot

Hi,

I think what he means is there is an entry like this "root=PARTUUID=e3dfe5c8" in your /boot/cmdline.txt file.
by itsmedoofer
Thu Jan 17, 2019 9:49 am
Forum: Raspbian
Topic: update SDL2 to a recent version
Replies: 2
Views: 246

Re: update SDL2 to a recent version

Hi,

It may be worth having a look at the Retropie site, from memory they roll thier own SDL2 package, worth a click...
by itsmedoofer
Wed Jan 16, 2019 9:28 pm
Forum: Networking and servers
Topic: Raspberry pi Zero Nas speed
Replies: 5
Views: 956

Re: Raspberry pi Zero Nas speed

Hi,

I use the official Pi WiFi dongle, the Pi is quite close to the access point so the connection is good, 150Mbit up and down.

If I get a chance I will see if I can do some performance tests for you on my LAN...
by itsmedoofer
Tue Jan 15, 2019 1:06 pm
Forum: Media centres
Topic: Advice on using Pi as TVHeadend headless backend.
Replies: 3
Views: 1045

Re: Advice on using Pi as TVHeadend headless backend.

Hi, I have it running headless and from what I have seen it does not overly hammer the SD card, the info for the EPG guide is not huge anyway, I suppose if you are going to use it for recording or time shifting then that could be a different matter, and then an HDD could be a far better choice. I ha...
by itsmedoofer
Tue Jan 15, 2019 12:49 pm
Forum: Networking and servers
Topic: Raspberry pi Zero Nas speed
Replies: 5
Views: 956

Re: Raspberry pi Zero Nas speed

Hi,

I was running over Wifi, the limiting factor with the ZeroW was the CPU usage, you may not experience this if you have no encryption on your NAS.

My VPN now runs on a Pi2 over Wifi, with that I easily see 20mbps, I am now limited by WiFi and Internet speeds....

Regards,
by itsmedoofer
Fri Jan 11, 2019 12:43 pm
Forum: Networking and servers
Topic: Raspberry pi Zero Nas speed
Replies: 5
Views: 956

Re: Raspberry pi Zero Nas speed

Hi, I cant comment on NAS speed, however I was using a ZeroW to run a VPN, the speeds weren't great, things did improve if I over-clocked the heck out of it, even then I don't think I hit 10Mbit, they were better than 2-3 though.. I think the issue you are seeing is that everything is essentially co...
by itsmedoofer
Tue Jan 08, 2019 12:23 pm
Forum: Camera board
Topic: RPi Cam Web Interface
Replies: 4959
Views: 1234047

Re: RPi Cam Web Interface

Gary Littlemore wrote: @btidey Is there a version log Robert so we can see what's been updated in each version released?
You can get a good idea of what has changed by looking at the commits on the GIT page...

Go to advanced search