Go to advanced search

by RpiName
Tue Oct 02, 2018 6:23 pm
Forum: Camera board
Topic: Webrtc works on 3G but not on Wifi or Lan
Replies: 1
Views: 104

Re: Webrtc works on 3G but not on Wifi or Lan

first make sure you understand how webrtc works with NAT traversal:
https://webrtcglossary.com/nat/
by RpiName
Sun Sep 16, 2018 12:15 am
Forum: Automation, sensing and robotics
Topic: Advice - local telepresence to internet - best latency
Replies: 2
Views: 169

Re: Advice - local telepresence to internet - best latency

UV4L is being used in many telepresence projects. It also supports bidirectional webrtc data channels which could be used to write/read the GPIOs from the browser. More informations at https://linux-projects.org.
by RpiName
Mon Aug 27, 2018 1:49 pm
Forum: Camera board
Topic: View camera on a phone without opening the firewall
Replies: 3
Views: 452

Re: View camera on a phone without opening the firewall

Requirements: * No inbound firewall ports opened, likely over RTMP push or similar * Stream to Android and iPhone * Stream from the on-board Pi camera (NoIR) with a lightweight binary (ffmpeg?) * Stream additional on-site RTSP cameras through the Pi (ffmpeg from RTSP to RTMP?) * Encryption, authent...
by RpiName
Fri Aug 24, 2018 6:46 pm
Forum: Graphics, sound and multimedia
Topic: HDMI to CSI-2 via TC358743 on RPI3b+ error
Replies: 8
Views: 297

Re: HDMI to CSI-2 via TC358743 on RPI3b+ error

Sorry, I got confused by the number of your replies and edits. Can you please summarize in a clean new reply

- what you tried
- what works
- what does not
by RpiName
Fri Aug 24, 2018 4:10 pm
Forum: Graphics, sound and multimedia
Topic: HDMI to CSI-2 via TC358743 on RPI3b+ error
Replies: 8
Views: 297

Re: HDMI to CSI-2 via TC358743 on RPI3b+ error

To generate an edid file use something like

Code: Select all

sudo get-edid | xxd -p > edid.txt
get-edid can be installed with the read-edid package

I suggest that you test with the 3B first before moving on to the 3B+

set the verbosity=8 in the config file to produce more logging
by RpiName
Fri Aug 24, 2018 3:00 pm
Forum: Graphics, sound and multimedia
Topic: HDMI to CSI-2 via TC358743 on RPI3b+ error
Replies: 8
Views: 297

Re: HDMI to CSI-2 via TC358743 on RPI3b+ error

The communication over I2C looks fine. If no signal is detected, check that your source is active. You might be required to pass a proper EDID to UV4L with the option: --tc358743-edid-file arg read edid from given file in hex format (you can add it to the config file). There is a command to produce ...
by RpiName
Fri Aug 24, 2018 2:30 pm
Forum: Graphics, sound and multimedia
Topic: HDMI to CSI-2 via TC358743 on kernel 4.1
Replies: 434
Views: 106481

Re: HDMI to CSI-2 via TC358743 on kernel 4.1

I have buy a B101 and have installed on RPI 3B+ Aug 24 16:15:26 RPI01 uv4l[384]: setting GPIO for board revsion: a020d3 Aug 24 16:15:26 RPI01 uv4l[384]: Failed: don't know how to set GPIO for this board! Aug 24 16:15:26 RPI01 uv4l[384]: <notice> [driver] ...command returned with exit code 0 Aug 24 ...
by RpiName
Mon Aug 20, 2018 9:07 am
Forum: Graphics, sound and multimedia
Topic: HDMI to CSI-2 via TC358743 on kernel 4.1
Replies: 434
Views: 106481

Re: HDMI to CSI-2 via TC358743 on kernel 4.1

thasnk you for your time i followed this instructions https://www.linux-projects.org/uv4l/installation/ raspivid -t 0 raspvid has absolutely nothing to do with UV4L. Please read the UV4L installation instructions carefully. As said there, I suggest that you also install the uv4l-server and uv4l-web...
by RpiName
Thu Aug 16, 2018 12:40 pm
Forum: Camera board
Topic: Problems with raspicam + uv4l + v4l2rtspserver + h264 Streaming
Replies: 1
Views: 277

Re: Problems with raspicam + uv4l + v4l2rtspserver + h264 Streaming

try to decrease the "bitrate=" value in the config file
by RpiName
Wed Jul 11, 2018 7:52 am
Forum: Camera board
Topic: Native WebRTC extension for UV4L now ready!
Replies: 40
Views: 27188

Re: Native WebRTC extension for UV4L now ready!

Is there some documentation of the web socket commands? In the example code I see this: force_hw_vcodec: true, vformat: 30, /* 30=640x480, 30 fps */ trickle_ice: true The documentation shows similar options, but they use different syntax, so I am trying to figure out how to use other commands. Is t...
by RpiName
Sat Jun 30, 2018 11:20 am
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: Auvidea B101
Replies: 9
Views: 808

Re: Auvidea B101

Since the program is left hanging without moving to the next line, I am assuming it is working but I have no idea how to see the feed. Sorry for another noob question, but form here I should install the streaming server plugin, then access the stream through vlc, correct? With this command: $ sudo ...
by RpiName
Fri Jun 29, 2018 8:58 am
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: Auvidea B101
Replies: 9
Views: 808

Re: Auvidea B101

Try

Code: Select all

uv4l --driver raspicam --auto-video_nr --width 640 --height 480 --encoding jpeg –tc358743-i2c-dev=/dev/i2c-0 -f --verbosity=8
by RpiName
Thu Jun 28, 2018 6:37 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: Auvidea B101
Replies: 9
Views: 808

Re: Auvidea B101

To make the B101 work with UV4L on the Pi Zero is rather simple provided that:: 1. you follow the instructions here *carefully* (which refer to the Rpi3): https://www.linux-projects.org/uv4l/installation/ 2. as opposite to what mentioned for the rpi3 in the doc., you set the: tc358743-i2c-dev = /dev...
by RpiName
Mon Jun 25, 2018 9:34 am
Forum: Camera board
Topic: Native WebRTC extension for UV4L now ready!
Replies: 40
Views: 27188

Re: Native WebRTC extension for UV4L now ready!

To know how to customize UV4L, refer to this example:
https://www.linux-projects.org/uv4l/tut ... detection/
by RpiName
Wed Jun 20, 2018 7:36 pm
Forum: General discussion
Topic: UV4L and IP camera
Replies: 14
Views: 661

Re: UV4L and IP camera

Two or three days ago UV4L introduced support for trickle ICE, which can speed up the ICE negotiation with the other peer while the candidates are being generated, while before it had to gather all the ICE candidates before the negotiation could take place, which could require several seconds or eve...
by RpiName
Wed Jun 20, 2018 12:30 pm
Forum: General discussion
Topic: UV4L and IP camera
Replies: 14
Views: 661

Re: UV4L and IP camera

what url do you pass to uv4l for authenticating and what is the output from uv4l?
by RpiName
Wed Jun 20, 2018 10:20 am
Forum: General discussion
Topic: UV4L and IP camera
Replies: 14
Views: 661

Re: UV4L and IP camera

good it works, but if authentication was required before and chrome did not need or ask for a password, then either the IP Camera has a problem or chrome has a problem
by RpiName
Tue Jun 19, 2018 10:44 am
Forum: General discussion
Topic: UV4L and IP camera
Replies: 14
Views: 661

Re: UV4L and IP camera

it seems you need to provide user and password in the --uri (see the uv4l tutorial to know how to pass them) ? check the full uri is correct by loading it e.g. in a browser and see if you can get a jpeg frame from there.
by RpiName
Tue Jun 19, 2018 10:24 am
Forum: General discussion
Topic: UV4L and IP camera
Replies: 14
Views: 661

Re: UV4L and IP camera

You can try to add "--verbosity=8 -f" to the command line to see what happens, and "dd if=/dev/video0 of=img.jpeg bs=1M" to try to capture a single jpg frame.
by RpiName
Mon Jun 18, 2018 11:27 pm
Forum: Camera board
Topic: Stream + Stills
Replies: 1
Views: 237

Re: Stream + Stills

With UV4L you can take Stills while the MJPEG video is in progress. The URL for the Stills tyically is:

https://<ip>:8080/stream/snapshot.jpeg?delay_s=10

where delay_s is a delay in seconds since the HTTP request is made. However, I think the resolution will be the same as the video.
by RpiName
Tue Jun 05, 2018 8:10 am
Forum: Troubleshooting
Topic: uv4l w/ USB webcam: unable to start server/stream
Replies: 1
Views: 288

Re: uv4l w/ USB webcam: unable to start server/stream

You have to use the uv4l-uvc driver, not raspicam.
by RpiName
Fri Jun 01, 2018 10:01 pm
Forum: Raspbian
Topic: Current, best encrypted IM/VOIP experience in Raspbian?
Replies: 4
Views: 443

Re: GNU Ring might actually be performant on a Pi 3B+

esbeeb wrote:
Fri Jun 01, 2018 8:11 pm
I think we can also rule out WebRTC on the Pi, despite the heroic efforts of the uv4l project. It would not likely be performant.
WebRTC is easily made possible on the Pi with UV4L because UV4L implements WebRTC natively and can use hardware acceleration for both H264 decoding and encoding.
by RpiName
Mon May 21, 2018 10:21 am
Forum: Graphics, sound and multimedia
Topic: HDMI to CSI-2 via TC358743 on kernel 4.1
Replies: 434
Views: 106481

Re: HDMI to CSI-2 via TC358743 on kernel 4.1

carlosgambato wrote:
Sun May 20, 2018 10:14 pm
I would like to know if the driver that I found on your site are compatible with Raspbian Stretch and Raspberry Pi3 B+ and, in this case, how could I solve this problem.
it should work. Exactly follow the instructions reported there.
by RpiName
Sun May 13, 2018 8:53 pm
Forum: Troubleshooting
Topic: rasberri pi 3 and Zero W keeps crashing
Replies: 19
Views: 970

Re: rasberri pi 3 and Zero W keeps crashing

uv4l is a program which runs in userspace, like any other programs it cannot provoke any crashes, unless it triggers a bug in the kernel, but then the bug is in the kernel, not in uv4l.
by RpiName
Sun Apr 29, 2018 2:25 pm
Forum: Camera board
Topic: UV4L WebRTC and Echo Canceler
Replies: 3
Views: 548

Re: UV4L WebRTC and Echo Canceler

Geoffr98 wrote:
Mon Mar 26, 2018 9:12 pm
I have also found that the noise reduction of the WebRTC is enabled - can this be disabled?
--echo-cancellation=yes|no should turn on and off most of audio post processing (not just aec)

it should have been fixed and effective in the latest release of uv4l

Go to advanced search