Raspberry Pi Forums

smx

Thanks!

Is there infrared light of some specific frequency that is 1. invisible to human eye and 2. can be picked up much more strongly by the normal Rpi camera than in the picture you've given?

Or any other way to have "normal" colors plus infrared illumination?

smx

I understand that the PiNoir can pick up infrared light but the colors are altered. Is it possible to have normal colors and additionally pick up infrared light? Such as is happening in the following video: http://youtu.be/SHbwi6JP7FM?t=50s (the webcam picks up the infared LEDs of the headsets). Tha...

smx

Sorry, I wasn't clear enough. I mean, whether solutions exist that shutdown if the power is getting low or that supply extra power in an accident of power loss.

smx

In the past I had problems with sudden interruptions of the power supply. Led to corrupted OS.

Are there scripts out there that manually shutdown the Pi or even better custom hardware solutions?

Thanks very much!

smx

I would be very interested as well if manual exposure is possible.

smx

Hey, I autostart a python program to run my Pi mobile without visual input. I mistakenly disconnected the Pi of the battery pack. The error message: "No filesystem could mount root, tried: ext4 [ 2.04266] ... Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(179.2)"...

smx

I ordered the following http://www.bitwizard.nl/catalog/product_info.php?products_id=146&osCsid=44up0jouacqt8bbos103lvf507 in 120 cm and it just works. Be aware that the original ribbon cable and the extention set's ribbon cable are very fragile and shouldn't be bent to often. I lost one of each...

smx

I had horizontal artifacts, flickering, banding in low light conditions. When my Pi was connected to the wall's power supply the power cable's length was irrelevant. Connected to a battery pack though, the power cable's length plays a role. I now use my mobile Pi camera only connected to the battery...

smx

Hello jbeale,

when you change the focus, does it stop being sharp to infinity?

Cheers

smx

Hello! Idea: Mobile Pi powered by battery pack with an attached camera board. The Pi is constantly recording full hd video. This buffer is being discarded. Only if a button is pressed 2 minutes before the button press and 1 minute after will be saved. Besides a LED (not on the camera board) stays li...

smx

Thank you very much for your measuring. Do you know of a solution that doesn't require gpio access?

smx

Thanks for the example.

HDR is a skill that depends on the context of the photo. One could clearly maintain the contrast of the first picture but also lighten up the annoying drowning bits.

smx

Thanks for your answer and sorry for not clarifying.

Besides the firmware, there wouldn't be any other way? Am I right, that the manual exposure is not yet implemented in the cameraboard firmware?

smx

Is it possible to record hdr photos and videos with one camera board?

Thank you

smx

rew wrote:Here is a picture that my raspberry pi camera took of it's own cable and raspberry pi....

This is exactly what I am going for. Please describe your setup and product models.

smx

attach a LED + resistor to a unused GPIO pin and flash it each time you write? or if you have the LED on the camera you can see it flashing or use a texy lcd shield and write to that Thanks for the ideas. The led on camera I cannot use. Texy's shield looks promising. Stick a bluetooth serial adapto...

smx

Hello texy, I have a couple of questions. 1. How much power does this shield use? a. nothing displayed b. displaying 2. I am using 3 heatsinks on my Rapsberry Pi. Doe they interfere with the size of your shield? 3. Is access to the remaining GPIO pins possible? 4. Do you know of any case that fits t...

smx

Hello,

I would like to test whether >30 cm is possible. How can I connect two ribbon cables of the mentioned kind?

Thanks

smx

Hello, imagine a mobile Raspberry Pi powered by a battery pack doing raspivid via python script. It basically records an infinite succession of 5 min raspivideo. The cameraboard led must be off. And I have no GUI or command line display. What ways can you think of to be sure/check that the program i...

smx

Hello,

I have yet to decide what microphone setup to acquire but I would like to know in advance:

In what way is it possible to sync a video generated by the camera board with an audio file generated by a microphone?

Many thanks,

smx

smx

Thank you, Leo. Looking forward to the photos.

A pint of pi ... I'd love to join if I wouldn't be in Berlin. Makes me remember the days I lived in London.

edit: Funny, I just noticed your meetup will be held in the hostel's pub I lived in for my first couple of months over there.

smx

LeoWhite wrote:
A cheap one! The exact one I got was http://www.amazon.co.uk/dp/B006P82R70/

Leo

Hey Leo,

you did attach the fisheye lense of the mentioned pack of three lenses? Would you be so kind and post a photo with the "wide angle lense" contained in the pack?

Cheers

smx

In a future update, will full hd video be not croppped as well?

Regards,

Search found 23 matches

Re: Rpi Camera vs. PiNoir: Normal Colors + Infrared?

Rpi Camera vs. PiNoir: Normal Colors + Infrared?

Re: Mobile Pi - Power Solution?

Mobile Pi - Power Solution?

Re: FREX/SCCB Register Control for manual exposure

SD corrupt if power disconnect abruptly

Re: Alternatives or replacements for camera flex cable?

Re: vertical artifacts in low light condition video ...

Re: setting lens focus

Mobile Camera - Endless Stream is Quite Tricky

Re: Mobile Pi: How to check whether Script is running?

Re: HDR raspivid and raspistill

Re: HDR raspivid and raspistill

HDR raspivid and raspistill

Re: Alternatives or replacements for camera flex cable?

Re: Mobile Pi: How to check whether Script is running?

Re: 1.8" TFT LCD Shield board v2

Re: Alternatives or replacements for camera flex cable?

Mobile Pi: How to check whether Script is running?

Sync Camera Board Output with Microphone Audio

Re: Working Fisheye Lens?

Re: Working Fisheye Lens?

Re: RPi Camera issues and status