Not housing but I use this to attach de Pi's boxes to the DIN rail: http://uk.rs-online.com/web/p/enclosure-accessories/1866788/?searchTerm=186-6788&relevancy-data=636F3D3126696E3D4931384E525353746F636B4E756D6265724D504E266C753D656E266D6D3D6D61746368616C6C26706D3D5E5C647B337D5B5C732D2F255C2E2C5D...

From the DB9 connector It would be sweet to see a small TFT screen that would lock into place in the cartridge socket!

Another idea... you can take a SNES cartridge and put the SD Card inside and then act like a normal cartridge!

Speaking from experience... :ugeek: I have some customers with raspberry pis inside 15cm x 8cm x 6cm totally closed boxes (no vents)... 6 months have passed and no problems whatsoever. My boxes are screwed and have rubber "feet" glued on top of the screw heads. The boxes have a type of ant...

I smell a low cost Go Pro camera...

Will be keeping an eye on this... well done!!

Hello everyone, Yes it's custom, the ones from ebay are very expensive.... It was made using a MicroSD to SD converter, a SD card socket from an old damaged Laptop and 20cm of ethernet cable! I wanted the SD Card to be "hot swap" because I can swap the card with one with PiMAME and plug a ...

The finished product:





Pictures of the build can be found here:
http://imageshack.us/g/1/10165300/

Hello Everyone, New to the boards, just wanting to show my case/media center made using the Pi and a HP Thinclient case. The Hardware used was: - Raspberry Pi - 120Gb HDD + enclosure - Powered 7 port USB hub (also powers the Pi) - 5V / 2.5A Power Supply - HP Thinclient Case Some features: - Openelec...