Go to advanced search

by milkboy007
Sat Jan 26, 2019 4:39 pm
Forum: Networking and servers
Topic: Remote tunneling certain port
Replies: 5
Views: 697

Re: Remote tunneling certain port

You can configure openvpn not to route all traffic into the tunnel, and I think this is your best chance. so best bet is still openvpn, and thats a lot of work. need to add a static route to all LAN hosts, bridging and routing, just to get it to work without eating my vps bandwidth :| The best woul...
by milkboy007
Sat Jan 26, 2019 9:10 am
Forum: Networking and servers
Topic: Remote tunneling certain port
Replies: 5
Views: 697

Remote tunneling certain port

my home ISP has decided to switch to private ip, which breaks my RPi server fuctionality. (the reason they gave me was, they are running out of ipv4 addresses) now my rpi is behind isp NAT, and i cant access all my apps directly, (ssh;22, cups;631 and shadowsocks proxy;8090,etc......) i have some vp...
by milkboy007
Fri Nov 09, 2018 9:04 am
Forum: General discussion
Topic: Its time for another round of "Which SOC you want to be used for Next Gen RPi"
Replies: 10
Views: 821

Re: Its time for another round of "Which SOC you want to be used for Next Gen RPi"

jamesh wrote:
Fri Nov 09, 2018 8:54 am
Pi4 decided years ago. Pi5 mostly decided. Bound to change though. We have a roadmap for some years ahead....
Say what are the high priorities criteria that went into the SOC design.
by milkboy007
Fri Nov 09, 2018 8:34 am
Forum: General discussion
Topic: Its time for another round of "Which SOC you want to be used for Next Gen RPi"
Replies: 10
Views: 821

Re: Its time for another round of "Which SOC you want to be used for Next Gen RPi"

The RPi 4 & 5 will already have been mapped out. Does the OP think Raspberry Pi Trading are a bunch of imbeciles ? These threads are just pathetic and insulting. :lol: just trying to get an opinion thats all. but since y'all against this, maybe i should start this thread in off topic. So Moderator,...
by milkboy007
Fri Nov 09, 2018 6:16 am
Forum: General discussion
Topic: Its time for another round of "Which SOC you want to be used for Next Gen RPi"
Replies: 10
Views: 821

Re: Its time for another round of "Which SOC you want to be used for RPi4"

You left off the "I don't care option" :mrgreen: Nice idea. hahahahaha........ :lol: another annoying thread named 'RPi 4' ... Too many people out there thinking that live is just a pony farm Change the title just for you. ;) 1. This thread won't last long before being locked. 2. It's almost certai...
by milkboy007
Fri Nov 09, 2018 4:43 am
Forum: General discussion
Topic: Its time for another round of "Which SOC you want to be used for Next Gen RPi"
Replies: 10
Views: 821

Its time for another round of "Which SOC you want to be used for Next Gen RPi"

TL;DR Since Eben has said "[Rpi] had hit the limits of the 40nm manufacturing process."and "possibility that the new Raspberry Pi 4 could be delayed". Rather than waiting for a new chip from Broadcom why not use an existing solutions for RPi 4. And with the release of Rockpi4, with more features and...
by milkboy007
Wed Aug 09, 2017 8:04 am
Forum: General discussion
Topic: Raspbian X86 detailed information or support page
Replies: 4
Views: 807

Raspbian X86 detailed information or support page

Does anyone knows if the Raspbian X86 has their own webpage/thread?

im wanna know, among other things, what kernel they use, and if eufi is supported.

Raspbian is a godsend for my weak n3350 Apollo lake laptop and is prettier than Debian out of the box. :D
by milkboy007
Tue Jun 20, 2017 8:40 am
Forum: Advanced users
Topic: Cups on OpenVPN server. help make it work
Replies: 1
Views: 721

Cups on OpenVPN server. help make it work

1st thing 1st. to keep open ports to a minimum i only want an openvpn port forwarded. so i dont want to forward cups port, exposed it to the internet if i can. next thing, so i got my cups and vpn running. when im on my local network connected to vpn, i can browse the net and, i can print. but when ...
by milkboy007
Thu Feb 04, 2016 8:02 pm
Forum: General discussion
Topic: Raspberry pi zero equivalent with Ethernet
Replies: 168
Views: 45065

Re: Raspberry pi zero equivalent with Ethernet

It is not only the cost. When you start adding boards on the top of each other the design becomes wobbly. With one HAT you have about 24mm high setup. If I then add a second board we are up to 36mm. The design is impractical. Higher than what it is wide. i dont see this as a design problem.if you p...
by milkboy007
Thu Feb 04, 2016 7:19 pm
Forum: General discussion
Topic: Raspberry pi zero equivalent with Ethernet
Replies: 168
Views: 45065

Re: Raspberry pi zero equivalent with Ethernet

OK to expand on what I wrote, many people who buy a $5 ZERO will do so without realising the cost of add-ons etc will make other models more cost effective. Yes you can have 10M Ethernet, Wireless, Gadget Mode and USBNET but it is not plug and pray which many purchasers will expect, and yes I have ...
by milkboy007
Tue Feb 02, 2016 10:50 am
Forum: General discussion
Topic: Raspberry pi zero equivalent with Ethernet
Replies: 168
Views: 45065

Re: Raspberry pi zero equivalent with Ethernet

He seems to be unaware that the power connector on the PI0 is power *only*. i dont think that he meant theere is two data micro usb port. you misunderstood that line 2x micro USB 2.0 ports (including one OTG). One port needed for power Then there is the minor factor that while Pi0s are scarce and h...
by milkboy007
Tue Feb 02, 2016 2:08 am
Forum: Teaching and learning resources
Topic: Learning about linux(not shell)
Replies: 20
Views: 4360

Re: Learning about linux(not shell)

To find out more about Linux the kernel I would suggest reading the Linux kernel mailing list . I happened to find this kernelnewbies.org Kernelnewbies is a community of aspiring Linux kernel developers who work to improve their Kernels and more experienced developers willing to share their knowled...
by milkboy007
Tue Feb 02, 2016 1:42 am
Forum: General discussion
Topic: Raspberry pi zero equivalent with Ethernet
Replies: 168
Views: 45065

Re: Raspberry pi zero equivalent with Ethernet

being late to the discussion, i juz would like to add, Orange Pi one(i guess no one creative work at xunlong, hahahahaha......) is juz what you are looking for in terms of price and feature. it cost $10 w/o shipping. advantage full sized usb and hdmi. quadcore soc. disadvantage it require more techn...
by milkboy007
Tue Dec 22, 2015 7:43 am
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: what is the longest GPIO-button cable possible on RPI?
Replies: 13
Views: 4569

Re: what is the longest GPIO-button cable possible on RPI?

so no ones absolutely knows, i guess i have to test and figure it out. :) ...... reliability is important.) ] it is important, but fixability / maintaince is also important. after all im the only (occasional) repair guy after all, IMO, reliablitily is higher in simpler design than complex one. singl...
by milkboy007
Fri Dec 18, 2015 7:09 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: what is the longest GPIO-button cable possible on RPI?
Replies: 13
Views: 4569

Re: what is the longest GPIO-button cable possible on RPI?

Belkin tells me ( http://www.belkin.com/support/dl/A7L504.pdf ) that cat-5 cable is about 30Ω per 1000 ft, so about 1Ω per 10m That means your longest run - 100m - will be about 10Ω just want to see if anybody knows, what they can handle. if no one knows for sure, i'm planning to test it on 100m Ca...
by milkboy007
Fri Dec 18, 2015 2:53 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: what is the longest GPIO-button cable possible on RPI?
Replies: 13
Views: 4569

what is the longest GPIO-button cable possible on RPI?

i have been searching around for the longest GPIO-button cable connection (radius & weight), cant find anything about it does any one know what is the longest (radius & weight) GPIO-button cable connection i can make? i want to make and intergrated doorbell and help button in my parents house, that ...
by milkboy007
Sat Dec 05, 2015 7:23 pm
Forum: Graphics, sound and multimedia
Topic: Push to talk (a simple intercom)
Replies: 6
Views: 10382

Re: Push to talk (a simple intercom)

Try UV4L . It works out-of-the-box: a quick glance at the website, its a live stream solution not PTT (Push To Talk) like mumble. plus, it doesnt support RPi1, i also assume RPi0 itsnt either. so it ist right for my next project(cheap multiple simple one button ptt) when i get my hands on a few RPi...
by milkboy007
Sat Mar 21, 2015 6:36 am
Forum: Troubleshooting
Topic: Server running on Pi does not work on public network
Replies: 4
Views: 777

Re: Server running on Pi does not work on public network

hmm...........
cant help you there :cry:

it may be the router, the board, the os, and/or the RPi setting.
sry dude......

on a side note, did you try the dvr port on the RPi? (im guessing u already tried it)
by milkboy007
Fri Mar 20, 2015 1:47 am
Forum: Troubleshooting
Topic: Server running on Pi does not work on public network
Replies: 4
Views: 777

Re: Server running on Pi does not work on public network

I can access the server locally, but not using my public IP. 1. when you say that, do you mean you cant access your pi from external network / internet? 2. if so, => do you have other server running that you can connect to, externaly, from the same location? 3. NO=> could you clarify whether your i...
by milkboy007
Fri Mar 13, 2015 4:12 am
Forum: General discussion
Topic: What to get
Replies: 9
Views: 2049

Re: What to get

This TP-Link version will be the next that I purchase based on positive comments from other users doing the same sort of thing. i would advise agaist that model, TP-LINK-TL-WR702N :| go for WR703N, which cost ~5USD more, but has bigger ram and rom, thus making it openwrt compatible, should the stoc...
by milkboy007
Fri Mar 13, 2015 4:06 am
Forum: General discussion
Topic: Does the Raspberry Pi work in a Vacuum?
Replies: 60
Views: 9363

Re: Does the Raspberry Pi work in a Vacuum?

Interesting.... What will be the biggest problem? Keeping it cool, or keeping it warm? :) And, while we're talking space: No problems with radiation? depend on the mission profile(altitude, orbit, duration, etc...). TL;Dont wanna write: for any weather balloon mission, need heating, when you mean s...
by milkboy007
Fri Mar 13, 2015 3:20 am
Forum: General discussion
Topic: What to get
Replies: 9
Views: 2049

Re: What to get

Just gives me a lot of devices to extend your WiFi, which is not what I'm trying to do. like this case :?: http://www.raspberrypi.org/forums/viewtopic.php?f=36&t=99150 that should work, if you wanna go for RPi :D then there is the openwrt router way http://wiki.openwrt.org/_media/doc/howto/802.11-r...
by milkboy007
Thu Mar 12, 2015 11:05 pm
Forum: General discussion
Topic: What to get
Replies: 9
Views: 2049

Re: What to get

search wifi n repeater on google, and get a list of bajillion £10/$15 300mbps wifi units that can act as a bridge/repeater/access point. Plugs directly into wall power, with ethernet one interface, and wifi the other...... i agree with it in general with that statement. But here is my oponion in th...
by milkboy007
Mon Mar 09, 2015 4:08 am
Forum: General discussion
Topic: Does the Raspberry Pi work in a Vacuum?
Replies: 60
Views: 9363

Re: Does the Raspberry Pi work in a Vacuum?

What about for two weeks in near space? Will it work in weather balloon near space/Stratosphere (~40km above sea), yes With proper sheilding and other technical consideration & adjustment it will work (like keeping the soc & battery at working temp, thermal sheilding etc .....) its extremely cold i...
by milkboy007
Mon Mar 09, 2015 2:10 am
Forum: General discussion
Topic: Can I Use Raspberry Pi to control Fan at my home?
Replies: 5
Views: 1223

Re: Can I Use Raspberry Pi to control Fan at my home?

Can I Use Raspberry Pi to control Fan at my home? if yes than how ? and if no than can you please suggest something to do so... YES, 5v Relay, smartplug hahahahaha........... :lol: see how much details i give in my answer, thats how much details you give in your question giving more details in waht...

Go to advanced search