Go to advanced search

by clixxio
Fri Apr 26, 2013 5:58 am
Forum: General programming discussion
Topic: GUI for Car info. Where do I get start with the programing?
Replies: 4
Views: 22925

Re: GUI for Car info. Where do I get start with the programi

What language do you want it programmed in ?
by clixxio
Wed Apr 17, 2013 11:20 pm
Forum: Python
Topic: Motion detection
Replies: 12
Views: 4444

Re: Motion detection

> I meant how can I see it. open your browser on the pi and type: http://127.0.0.1:8081 If you want to see it from other machines then you need to change the configuration file /etc/motion/motion.conf: webcam localhost on to: webcam localhost off If you want to detect motion from python code use som...
by clixxio
Wed Apr 17, 2013 2:38 am
Forum: Automation, sensing and robotics
Topic: Reading Temperature from MCP9808 Temperature Sensor
Replies: 12
Views: 7888

Reading Temperature from MCP9808 Temperature Sensor

I bought some of these: - http://uk.farnell.com/microchip/mcp9808-e-ms/temp-sensor-i2c-20-to-100-deg-8msop/dp/2080523 Wiring it all is fine. "i2cdetect -y 1" gives 0x18 and I can read 3 bytes from the device. However, I can't get a proper temperature reading using the following code. What's wrong is...
by clixxio
Wed Apr 17, 2013 2:25 am
Forum: Python
Topic: Motion detection
Replies: 12
Views: 4444

Re: Motion detection

Motion is likely to be a good fit. When it detects motion, it writes new .jpg files to the /tmp/motion directory. You can poll this directory with your program and delete old files. It's really extremely good at this. You only need to do this: > sudo apt-get install motion > sudo motion & And it's r...
by clixxio
Mon Apr 08, 2013 2:34 am
Forum: Python
Topic: Arduino Sketch Conversion
Replies: 4
Views: 1399

Re: Arduino Sketch Conversion

I was able to fork the project out to my own repo.

It will be actively developed so that sketches can be run on the pi.

Here is the URL:

- https://github.com/clixx-io/WiringPy
by clixxio
Wed Apr 03, 2013 7:38 am
Forum: Python
Topic: Arduino Sketch Conversion
Replies: 4
Views: 1399

Re: Arduino Sketch Conversion

Unfortunately, this project was closed down by the management of the ozberrypi meetup.

I will have to setup the project somewhere else.

You can email andrew (at) drivenlogic.com.au for reasons as to why the project has
been shut down.
by clixxio
Sun Mar 31, 2013 9:51 am
Forum: Python
Topic: Arduino Sketch Conversion
Replies: 4
Views: 1399

Arduino Sketch Conversion

Over here in Sydney Australia we are working on an Arduino Sketch convertor for the Raspberry-Pi. Here is the project: - https://github.com/OzBerryPi/WiringPy The way it works is that you pass an Arduino Sketch (a wiring program) and this gets converted to Python code. We're still working on the emu...

Go to advanced search