Go to advanced search

by PiModules
Mon Sep 16, 2019 7:23 pm
Forum: Advanced users
Topic: RaspberryPi 4: heatsink or fan
Replies: 84
Views: 40792

Re: RaspberryPi 4: heatsink or fan

Hi,
Agree with you.
The only what can be done is to decrease the FAN noise like we done, but using PWM FAN control and dedicated cooling profiles that adjust the exact FAN speed to existing temperature conditions.
20190907_135554_1024x1024.jpg
PiCoolFAN4 with RTC and PWM Control
20190907_135554_1024x1024.jpg (102.1 KiB) Viewed 1788 times
www.pimodules.com

Best Regards
Ioannis
by PiModules
Mon Sep 09, 2019 11:18 am
Forum: Troubleshooting
Topic: Raspberry Pi 4 temperature
Replies: 562
Views: 227701

Re: Raspberry Pi 4 temperature

Hi, If you run PiCoolFAN 4 at 25%-50% of speed (ultra low noise) the on such environment it is fine. If during the time your application requirements increases temperature, the FAN speed will increased automatically, and when needs drop down, fan reduce their speed. You can use it also with a small ...
by PiModules
Sun Jul 28, 2019 9:34 pm
Forum: Troubleshooting
Topic: Raspberry Pi 4 temperature
Replies: 562
Views: 227701

Re: Raspberry Pi 4 temperature

Hi, PicoolFAN4 fits in all cases as also to the official one - see photos. Tomorrow or on Tuesday we will release measures of temperature monitoring log with FAN running, with different speed as also with automatic dynamic speed adjustment (depending to temperature level - in order to decrease possi...
by PiModules
Wed Jul 24, 2019 11:21 pm
Forum: Troubleshooting
Topic: Raspberry Pi 4 temperature
Replies: 562
Views: 227701

Re: Raspberry Pi 4 temperature

Hi, I agree with you, however in some case a big (like in above picture) cooling heatsink could do the difference. However it is depending to the application. So, all solutions are good. One solution is better for one application and another for other. You can use below of our PiCoolFAN4 heatsink an...
by PiModules
Wed Jul 24, 2019 8:39 pm
Forum: Troubleshooting
Topic: Raspberry Pi 4 temperature
Replies: 562
Views: 227701

Re: Raspberry Pi 4 temperature

Hi, If you not like the FAN, it is FINE. However we tried to add to the PiCoolFAN4 as much as possible extra features + cooling, as usually people need a HW RTC with coin battery so we added it, as users need to know easy about the temperature we added 3 LEDs (Cold, FAN-running, HOT), as user need m...
by PiModules
Tue Jul 23, 2019 6:23 pm
Forum: Troubleshooting
Topic: Raspberry Pi 4 temperature
Replies: 562
Views: 227701

Re: Raspberry Pi 4 temperature

Hi, We just send to factory for manufacturing the following HAT - PiCoolFAN4. It could be an alternative for the other cooling devices. It combines PWM FAN, HW RTC with battery, and other features. https://pimodules.com/product/picoolfan4 In about 2 weeks should be here. PiCoolFAN.jpg Kind Regards P...
by PiModules
Fri Sep 07, 2018 11:03 pm
Forum: Other projects
Topic: receiver at 518kHz
Replies: 3
Views: 1953

Re: receiver at 518kHz

Hi, I have done such receiver in the bast, much before Raspberry Pi born. It was a receiver that was used on a ships. The most difficult part is the receiver itself. You need to have typical receiver design, then narrow bank crystal filter or DSP (now available), then down converter, and the PLL bas...
by PiModules
Thu Feb 15, 2018 5:30 pm
Forum: General discussion
Topic: UPS hat
Replies: 4
Views: 1363

Re: UPS hat

Hi,
Check this one, support up to 2.6 A @5V

http://www.pimodulescart.com/shop/item.aspx?itemid=30

Warmest Regards
PiMaster
www.pimodules.com
by PiModules
Tue Feb 28, 2017 9:33 pm
Forum: Advanced users
Topic: Moving Linux kernel to 4.9
Replies: 289
Views: 113365

Re: Moving Linux kernel to 4.9

PhilE wrote:That's good news. I still want to look at the initial I2C speed and whether the actual bus speed can ever exceed the requested maximum, but it sounds like it isn't an issue at the moment.
not for our device at least, working well and stable on our side
BR Io
www.pimodules.com
by PiModules
Tue Feb 28, 2017 1:12 pm
Forum: Advanced users
Topic: Moving Linux kernel to 4.9
Replies: 289
Views: 113365

Re: Moving Linux kernel to 4.9

Thanks, Ioannis - let me know if I can help ([email protected].org). Hi, Thank you PhilE for already provided support!! I was not able to wait more to see what is wrong on the combination of both systems, and set up a testing workbench in order to do some basic measurements. I'm sending you an email...
by PiModules
Sat Feb 25, 2017 6:17 pm
Forum: Advanced users
Topic: Moving Linux kernel to 4.9
Replies: 289
Views: 113365

Re: Moving Linux kernel to 4.9

Thanks, Ioannis - let me know if I can help ([email protected].org). Hi, Thank you PhilE for already provided support!! I was not able to wait more to see what is wrong on the combination of both systems, and set up a testing workbench in order to do some basic measurements. I'm sending you an email...
by PiModules
Sat Feb 25, 2017 2:00 am
Forum: Advanced users
Topic: Moving Linux kernel to 4.9
Replies: 289
Views: 113365

Re: Moving Linux kernel to 4.9

Thanks for the feedback - I'm clutching at straws and it was worth a try. It sounds like you can send and receive any data you like as long as it's ff. More straw clutching: have you tried dropping the I2C baud rate? "dtparam=i2c1_baudrate=10000" in config.txt should do the job. Hi, I'm the bad man...
by PiModules
Sun Jan 29, 2017 8:15 pm
Forum: General discussion
Topic: Battery Power/Pack
Replies: 29
Views: 45609

Re: Battery Power/Pack

Hi,
Yes, it includes watch dog timer, and PROTECT the Raspberry Pi during the boot process, from the second zero of running.
BR PiM
by PiModules
Thu Jun 09, 2016 8:08 pm
Forum: General discussion
Topic: Battery Power/Pack
Replies: 29
Views: 45609

Re: Battery Power/Pack

Hi,
You might be interesting for your project on our new UPS PIco HV3.0A, that we designed especially for the Raspberry Pi 3. We just started pre orders.
UPS_PIco.jpg
UPS PIco HV3.0A
UPS_PIco.jpg (32.5 KiB) Viewed 1880 times
http://www.pimodules.com/_pdf/UPS%20PIc ... pectus.pdf

My Warmest Regards
Ioannis
http://www.pimodules.com
by PiModules
Wed Nov 18, 2015 4:10 pm
Forum: General discussion
Topic: UPS for Raspberry and USB HDD please recommend
Replies: 3
Views: 981

Re: UPS for Raspberry and USB HDD please recommend

Hi,

UPS PIco protect whatever is connected/powered to/from the Raspberry Pi on the J8 or USB sockets. Therefore if your HDD is powered from USB then OK.

The UPS PIco is able to supply up to 2 A if cable power is missed.

My Warmest Regards
PiMaster
by PiModules
Wed Sep 02, 2015 7:36 pm
Forum: Other projects
Topic: The new official Pi Case
Replies: 13
Views: 5958

Re: The new official Pi Case

Hi, We just released the new UPS PIco that fit-in to the official Pi case It is available with battery 300 mAh and battery 1000 mAh, both versions fit-in to the case. It is not just a UPS, as user has available much more features, including user LEDs, buzzer, IR, user buttons, 1-wire, on board therm...
by PiModules
Sat May 23, 2015 12:35 pm
Forum: Troubleshooting
Topic: Prevent SD-Card Corruption
Replies: 241
Views: 241931

Re: Prevent SD-Card Corruption

Hi, You can simply use the UPS PIco that solve completely the card corruption problem, offering a plenty of other extra features. The most important is that you do not need to have any extra powering system, just put it on top of RPi, power as usual, and that is it. See here: http://www.pimodulescar...
by PiModules
Sun Feb 08, 2015 9:48 am
Forum: Automation, sensing and robotics
Topic: UPiS - Uninterruptible Power intelligent Supply
Replies: 51
Views: 18509

Re: UPiS - Uninterruptible Power intelligent Supply

Hi,

We will release a detailed technical specifications like in the UPiS. However please kindly notice that it is a very new product so some parts have been delayed due to increased requests. We are a small company.

My Warmest Regards
Pi Master
by PiModules
Sat Feb 07, 2015 10:47 pm
Forum: Automation, sensing and robotics
Topic: UPiS - Uninterruptible Power intelligent Supply
Replies: 51
Views: 18509

Re: UPiS - Uninterruptible Power intelligent Supply

Hi, Please find here below my answers for your questions. What is the accuracy of the emulated Real Time Clock (RTC), i.e. what time deviation per month or year should one expect? The RTC is emulated on the mico controller. We have used an "zero drift" algorithm with their own crystal of 32 768 kHz....
by PiModules
Sun Jan 04, 2015 11:50 pm
Forum: Automation, sensing and robotics
Topic: UPiS - Uninterruptible Power intelligent Supply
Replies: 51
Views: 18509

Re: UPiS - Uninterruptible Power intelligent Supply

Hi,
Yes, we started already shipping, also to distributors.

Warmest Regards
PiMaster
by PiModules
Sat Dec 20, 2014 6:27 pm
Forum: Gaming
Topic: Creating a portable raspberry Pi using Xbox controller
Replies: 6
Views: 5407

Re: Creating a portable raspberry Pi using Xbox controller

Hi, What about this one UPS PIco http://www.pimodulescart.com/shop/item.aspx?itemid=5 very good price, a very long list of features No need for external cabling, works on B+/A+ Provide 2A and peak 3A from LiPO battery, no need for external cabling, just plug on top of RPi Warmest Regards Pi Master
by PiModules
Thu Dec 18, 2014 4:56 pm
Forum: Deutsch
Topic: [GELÖST] Mehrere Erweitungsboards gleichzeitig möglich?
Replies: 11
Views: 8120

Re: Mehrere Erweitungsboards gleichzeitig möglich?

Zunächst danke für die Antworten. The 25C is not addressed to temperature of the battery From my point of view there was no missunderstanding, but thanks for your post. By the way, your translation programm is much worse than my english ;) mother google ;-) Da die Stromversorgung über die Stiftleis...
by PiModules
Thu Dec 04, 2014 9:19 am
Forum: Deutsch
Topic: [GELÖST] Mehrere Erweitungsboards gleichzeitig möglich?
Replies: 11
Views: 8120

Re: Mehrere Erweitungsboards gleichzeitig möglich?

Hi, I mean, the current that is drawing from the battery, and provided to the J8 5V Pins. The specifications of the Raspberry Pi B+ HAT says that powering should be able to provide 5V 2A. In order to provide 5V 2A, the step-up (boost) converter need to draw current from battery about 3.5 - 3.8 A. Du...
by PiModules
Wed Dec 03, 2014 9:57 pm
Forum: Deutsch
Topic: [GELÖST] Mehrere Erweitungsboards gleichzeitig möglich?
Replies: 11
Views: 8120

Re: Mehrere Erweitungsboards gleichzeitig möglich?

Hi, I'm from Pi Modules, manufacturer of the UPS PIco , just saw your comments about 25C of the LiPO battery. The 25C is not addressed to temperature of the battery, but means the current that can be provided by battery. Therefore 25C means that battery can provide current 25 times of battery capaci...

Go to advanced search