Raspberry Pi Forums

AutoStatic

I disabled ethernet but it really made not much difference. I noticed that those clicks and pops might be just running out of cpu power. They occur when activating a window etc. :( Then you might benefit from using a real-time kernel. This is my second time I'm using my R16 as an audio interface an...

AutoStatic

Synthberry wrote:Thanks for creating the Wiki page - very helpful stuff. Am well on the way to getting some nice synth code running on the Pi 3 as a result.

Awesome! Got my Pi3 in last week too

AutoStatic

At this point I realized Zoom R16 (which I have) playback support had been finally implemented in 4.4 kernels. Updated and got it working quite well. But there is minor problem. With Zynaddsubfx I get occasional snaps and pop without jack reporting xruns. I haven't tried tweaking ethernet settings....

AutoStatic

Further experimentation showed that a 6 period buffer with 8 frame period size yields MIDI note-on to sound start latency of 2 milliseconds. Those are a bit weird values but if it works it works ;) The consensus is to use a period buffer size of 3 for bus-driven devices (USB, FireWire) and a size o...

AutoStatic

Long overdue but I've uploaded LinuxSampler 2.0.0 to my Raspbian Jessie repository. Raspbian Wheezy users are out of luck unless someone knows a way to compile LinuxSampler 2.0.0 with a GCC version <= 4.8.

AutoStatic

a2jmidid should work but nowadays you might want to look at the built-in JACK-ALSA MIDI bridges for Jack1 and Jack2. When using -Xseq they should get loaded with recent versions of Jack1 and Jack2. Which Raspbian are you using? The Wheezy or the Jessie one?

AutoStatic

One more thing I noticed in your posts Jeremy that you use commands a la Ubuntu A la Debian you mean ;) sudo apt-get install Is this available in Arch? No, unfortunately Arch lacks such a sophisticated package manager ;) Second, am I better off with a Pi2 to start with...for more resources? Or mayb...

AutoStatic

[gixie@alarmpi ~]$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice...

AutoStatic

Hello everybody, I started looking into a guitar effects processor based on a pi or pi2 (I own both and a couple of 0s). I managed to get everything working under Ubuntu x64 un a modified Asus Chromebox with an external M-Audio Fast Track device. I can't for the love of it get it to work on the Pi'...

AutoStatic

i searched many days and weeks in the web for a professional teacher :shock: . now i think i found you because i think you knows very well the sampling world with low latency raspberry, teensy or other mini pc. I'm in no way a professional teacher :oops: i want to play different sounds(bass samples...

AutoStatic

For anyone who is following this thread or accidentally stumbled upon it: http://autostatic.com/tag/synth-module/
I'm currently trying to put together a synth module based on ZynAddSubFX.

AutoStatic

ShiftPlusOne wrote:For what it's worth, this is how it's built: https://github.com/RPi-Distro/firmware

Awesome, thanks, that's all I need. I should have been more clear with my question. I just wanted to know how these packages were built as I am tinkering with building these kind of packages myself.

AutoStatic

Would it be possible to publish the source package files for the raspberrypi-firmware package so I can do an apt-get source raspberrypi-firmware?

AutoStatic

Just a quick addendum, the cirrus-config and linux-image packages have been tested on both the RPi1 and the RPi2.

AutoStatic

For those interested I've uploaded the following packages to my Raspbian repository (http://rpi.autostatic.com/): linux-image-cirrus: meta package that installs a kernel with Wolfson/Cirrus Logic audio interface support cirrus-config-overlay: package that installs the device tree overlay file for th...

AutoStatic

Are you using Jack1 or Jack2? If it's Jack1 try lowering the rtprio to 84 instead of 89. It seems Jack1's watchdog thread gets in the way.

AutoStatic

cannot use real-time scheduling (FIFO at priority 99) [for thread -1246063504, from thread -1246063504] (1: Operation not permitted) sudo dpkg-reconfigure jackd2 (or jackd1 if you have that installed) Select Yes when asked to enable realtime process priority sudo usermod -a -G audio youruser yourus...

AutoStatic

Hello Walle, From the website of the author of the Digidesign Mbox 2 kernel module: Any config issues with JACK, make sure you are using the ALSA backend and 2 ins and 2 outs, >256 buffer size and 3 periods So maybe JACK works better like this: jackd -P89 -p16 -t2000 -dalsa -dhw:1 -p256 -n3 -i2 -o2 ...

AutoStatic

I don't know how to describe it properly, the sound is distorted, not clear. Sounds like buffer under runs: http://www.linuxjournal.com/article/6735?page=0,1#N0x19ab2890.0x19ba7ca0 I run jack via "/usr/bin/jackd -dalsa -dhw:0 -r44100". The onboard audio is not the best option for doing low-latency ...

AutoStatic

morgon wrote:The same setup on the Pi works in principle but the resuting sound (speakers connected via the 3.5mm cinch) is awful.

Describe awful

morgon wrote:Any other ideas on what I could try?

What JACK settings are you using?

AutoStatic

https://github.com/AutoStatic/configs/tree/rpi/home/pi/drumkv1 If you have jalv installed from my repository you can create presets yourself: ssh -X into your RPi Run jalv.gtk http://drumkv1.sourceforge.net/lv2 Create your presets (warning: this process can be slow and tedious on the RPi) Save your ...

AutoStatic

I'll post it if I find time!

AutoStatic

Try DHgate: http://www.dhgate.com/wholesale/usb+rol ... +midi.html

AutoStatic

Bus 001 Device 007: ID 1941:8021 Dream Link WH1080 Weather Station / USB Missile Launcher Unfortunately this is the non-USB MIDI version of the foldable drumpad, I know because I have both versions: http://lists.linuxaudio.org/pipermail/linux-audio-user/2013-March/091142.html So in the context of L...

AutoStatic

Thanks for your quick reply :] The 2 lines are now in etc/udev/rules.d/10-drumpad.rules! Could you post the output of lsusb to make sure the vendor and product ID's match? But i dont know where and how to place the drumpad script? You can place it wherever you like, I prefer putting user scripts in...

Search found 326 matches

Re: RPi and real-time, low-latency audio

Re: RPi and real-time, low-latency audio

Re: RPi and real-time, low-latency audio

Re: RPi and real-time, low-latency audio

Re: Rasbian repository for audio related software packages

Re: Rasbian repository for audio related software packages

Re: RPi and real-time, low-latency audio

Re: RPi and real-time, low-latency audio

Re: RPi and real-time, low-latency audio

Re: RPi and real-time, low-latency audio

Re: Raspberry Pi as a synth

Re: raspbian: kernel update

Re: raspbian: kernel update

Re: Rasbian repository for audio related software packages

Re: Rasbian repository for audio related software packages

Re: RPi and real-time, low-latency audio

Re: RPi and real-time, low-latency audio

Re: RPi and real-time, low-latency audio

Re: MIDI sound issues

Re: MIDI sound issues

Re: RPi and real-time, low-latency audio

Re: RPi and real-time, low-latency audio

Re: RPi and real-time, low-latency audio

Re: RPi and real-time, low-latency audio

Re: RPi and real-time, low-latency audio