Raspberry Pi Forums

Andrew1971

Hi All
Is there such a thing as hdmi monitors/tv that go above 60mhz like 75mhz because i suffer from severe migraine headaches
60mhz makes me have bad head but 75mhz i am ok with. I have a hdmi to vga adapter for my pi zero do a reboot it stops
displaying. So what are my options.
Many Thanks
Andrew

Andrew1971

Hi All Windows CE on the raspberry pi would be fantastic. I would like CE as i know more. I would modify miopocket to run on top of CE some of the software is old but does what i would like it do. http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=136798&whichpage=1 It would make a nice CE de...

Andrew1971

That's what i call recycling. I like the case it looks good and standard.
I would make a good super computer if you had 50 all stacked up

Andrew1971

Thank You for the reply Mahjongg. Well i changed the hdmi_drive=2 to get sound over hdmi when i installed LXmusic. Then rebooted screen res changed but in a good way it's now 720p tweaked the overscan and Hopefully that should be it now !! So i am happy for now. Now i can start playing with PI :D Ma...

Andrew1971

HDMI to VGA adapter is one off them going to make it easier for a newbie to get a better screen.
If so which one.

Andrew1971

Well i think i will have to go back to 1024x768 stretched at l lest i can see every thing fine. Just got to hope stuff from pistore works with that resolution or iam stuffed. The worst thing at the moment is why not vga instead off hdmi i have 5 vga monitors so had to buy one with hdmi and does not ...

Andrew1971

I now have put memory split in config.txt not sure how tell if working.
I managed to get it to 1080i and fit's the whole screen but guess what back to square 1 the writing is very small barely readable !!

Andrew1971

Well i thought my screen settings were right until i tried raspbmc that used all my screen then saw the res it's 1920x1080p @60hz so how can't i get this on raspbian :cry: raspbian screen settings are 1024x768 streched that's the best i can get it now where near correct res. So iam a little miffed/a...

Andrew1971

Yes that's the one use as well work's good the best one there is for windows as far as i know

Many Thanks
Andrew

Andrew1971

Thank you all for your suggestions will try some later when connected to the internet.
I was thinking 1 os to do every thing i wanted not swap sd cards for other os's only got 2 sd card's
Many Thanks
Andrew

Andrew1971

qmmp command not found. the problem i have is no internet on the pi cant get wifi to work ,to far for a ethernet cable. So way is a video or Mp3 player not included as standard.

Many Thanks
Andrew

Andrew1971

Hi All
Where's the Mp3 player in raspbian, Does it have one can't seem to find it

Many Thanks
Andrew

Andrew1971

Solved it at last

Well i changed to this in the config.txt
hdmi_mode=16
hdmi_group=2.
and it worked now got full screen it is as it should be now

Thank you all for your help much appreciated.
Many Many
Thanks
Andrew

Andrew1971

Still no closer. Now my sd card slot is getting loose it been in and out that many time's.
I have now had enough of this crap untill some is kind enough to give me their working config
for a hd tv so i can compare the 2 so i can see what's happening then my pi is out off use.
Many Thanks
Andrew

Andrew1971

Why do you have to redo the card to change overscan? I dont know how to change overscan You need to change the mode to get a different resolution/text size How do i do that. You should be able to just plug the card into a PC running Linux/Windows/OSX or whatever and edit the config.txt file. It will...

Andrew1971

Well still no closer disabled overscan went off the edge of the tv but guess what the writing is still to small to read. I can see a lot of newbie's like me getting annoyed at this why is it not automatic :cry: P.S Now to re enable overscan i got re do the sd card again .4 hour's later still no dece...

Andrew1971

Hi All Got a pi for christmas and cant use it because of hdmi the resolution is to small on the tv can't read it. and i cant adjust the resolution because i cant read it. Then tried composite it's to big can't scroll to get to the bottom so can't use that. Tv size is about19inch. Till this gets sort...

Andrew1971

Hi All I am Andrew from northallerton in the UK. Done lot's factory work in the food industry. Now i am a cleaner for my local leisure center i fancied a change. My first computer was a amstrad cpc464 then plenty more after it !! :) to many to list. Any way found the raspberry pi by accident all way...

Andrew1971

Hi All I ordered a Raspberry Pi from New IT on friday after noon about 2.20ish and by saturday after noon at 1.20 it arrived in the post not even 24 hours after the order :D I am amazed at how quick it came. Can't thank New IT enough fantastic service. Very happy with the service indeed :D So get a ...

Search found 19 matches

HDMI Monitor/TV

Re: Windows CE

Re: SCSI CD-ROM case with everything

Re: Can't Use Respberry Pi (solved)

Re: Can't Use Respberry Pi (solved)

Re: Can't Use Respberry Pi (solved)

Re: Can't Use Respberry Pi (solved)

Re: Can't Use Respberry Pi (i thought it wassolved)

Re: GParted Help!!!

Re: Mp3 Player

Re: Mp3 Player

Mp3 Player

Re: Can't Use Respberry Pi (SOLVED)

Re: Can't Use Respberry Pi

Re: Can't Use Respberry Pi

Re: Can't Use Respberry Pi

Can't Use Respberry Pi (solved)

Re: Introduce yourself!

Re: New IT (UK) Supplier