Raspberry Pi Forums

n9mfk

here what i get for a 4gb card Beau Disk /dev/mmcblk0: 3974 MB, 3974103040 bytes 4 heads, 16 sectors/track, 121280 cylinders, total 7761920 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk iden...

n9mfk

It is booting up an its is raspbian
Beau

n9mfk

Hi, What the best way to to fix it I used the windows tool to format the the sd card fat 32 thanks beau Command (m for help): Disk /dev/mmcblk0: 3974 MB, 3974103040 bytes 4 heads, 16 sectors/track, 121280 cylinders, total 7761920 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/ph...

n9mfk

do i use a straight cable?

n9mfk

That the problem im on windows 7 so im not sure how to do it
Beau

n9mfk

I known how to make a clean sd but the problem, is bere i put it in the pi
i went to change the two file that setup the networking
Beau

n9mfk

I do not have access to wired internet i have a ethernet jack on pc with a wired card and wireless but that it
Beau

n9mfk

Hi,
I am in need of healp here what I am trying to do

1 set up a clean sd card
2 has to be all done headless
3 with wifi presetup

i have the 2 network files i need to change how can i work them into a raspbian image
Im on a win7 pc thanks for any help
Beau

n9mfk

hi,
is ssh on by default
im doing a set up were i can not use rspi-config
if it not on how do i i turn it on thanks beau

n9mfk

Hi All,
Has anyone tried a sandisk SDSDU-016G-A11 sd card

http://www.bestbuy.com/site/SanDisk+-+U ... Id=4957245
Thanks Beau

n9mfk

hi Mobius is that a sdhc?
also what size
thanks

n9mfk

i did some test to day at tp1 an 2 i got 5.05 volts
but at times it acts as if there no sd card
any idea?
Thanks Beau

n9mfk

Hi killor,
what is the name of that case?
thanks Beau

n9mfk

Hi All,
I looking for a case were top is easy to get off
something like http://plastikdrucker.de/page2/ this but im in the us
thanks for any ideas

n9mfk

The pi act as if some time the sd card not in an it is an i was think it may be a power problem?
Beau

n9mfk

Hi All, I need help picking a better power supply Im using a rev 2 pi sd is http://www.mcmelectronics.com/product/83-14268 with a powered usb hub http://www.tripplite.com/en/products/model.cfm?txtModelID=3167 this for wireless http://www.mcmelectronics.com/product/831-3058 an a griffin imic here is ...

n9mfk

Hi All,
If you can not get to TP1 and TP2 on the rpi board is the a command to read the voltage?
thanks beau

n9mfk

Hi All
from ssh what the best way to shut the pi down ?
why i ask it seam like there been a lot of times when i power back up i get the red led no green but if i power back down an back up its ok

n9mfk

samba an winbind worked great

thanks beau

n9mfk

how do i find the do find hostname ?
thanks Beau

n9mfk

Hi All,
im using putty on win 7 to ssh to my pi
if i us ip address it works but if i use host name raspberrypi i got host not found
what can i do to fix this? thanks Beau

n9mfk

here what i got back # Start the PulseAudio sound server in system mode. # (enables the pulseaudio init script - requires that users be in the # pulse-access group) # System mode is not the recommended way to run PulseAudio as it has some # limitations (such as no shared memory access) and could pot...

n9mfk

HI justinsb,
cold you please post your start-up script an how to do it
thanks Beau

n9mfk

Hi all,
i got this Waring after i did a sudo apt-get dist-upgrade
[warn] PulseAudio configured for per-user sessions ... (warning).
What do i need to do?
Beau

n9mfk

Kevin,
i do have a question i run the linux distro on a usb dive on my pc how do i make sure that script runs on on the pi sd card?
thanks beau

Search found 26 matches

Re: how to fix this?

Re: how to fix this?

how to fix this?

Re: need help changing a image ?

Re: need help changing a image ?

Re: need help changing a image ?

Re: need help changing a image ?

need help changing a image ?

Raspbian ssh?

sandisk SDSDU-016G-A11 sd card?

Re: power supply advice needed?

Re: power supply advice needed?

Re: look for a case that is easy to open?

look for a case that is easy to open?

Re: power supply advice needed?

power supply advice needed?

command to read voltage?

best way to shut the pi down?

Re: host name ?

Re: host name ?

host name ?

Re: warnim after sudo apt-get dist-upgrade?

Re: Remote (VNC) cut and paste not working.

warnim after sudo apt-get dist-upgrade?

Re: need help on first set up?