Search found 16 matches

Go to advanced search

by psgarcha92
Sun Jun 02, 2013 8:11 pm
Forum: Other projects
Topic: Is it possible to have CLI on 3310 LCD?
Replies: 2
Views: 1498

Is it possible to have CLI on 3310 LCD?

Hey guys... I have a Raspberry pi that i want to connect to a Nokia 3310 LCD that i have. Actually, i want to be able to have the CLI on it, so that i can have a Keyboard connected to the Raspi, and type into it, and the 3310 connected to it keeps getting updated accordingly. Is this even possible? ...
by psgarcha92
Fri Apr 05, 2013 5:25 pm
Forum: Arch
Topic: Help! Cannot Change size of Console Font!!
Replies: 6
Views: 17364

Re: Help! Cannot Change size of Console Font!!

I want to make the font bigger, my Overscan settings are totally fine, i used the same ones form Raspibian Wheezy config.txt Ok, i rebooted and the font changed. I chenged the font to Terminus-16, but its still small. I dont know how i could be so fooling not rebooting after these changes. Thanks a ...
by psgarcha92
Fri Apr 05, 2013 4:13 pm
Forum: Arch
Topic: Help! Cannot Change size of Console Font!!
Replies: 6
Views: 17364

Help! Cannot Change size of Console Font!!

Hey Guys I am trying out ArchLinux for the first time, it sounds like fun... But i run into a problem, that i am unable to find a solution for... I am unable to change the size of fonts in the console, i.e, the startup terminal. I have tried nano /etc/vconsole.conf which now has KEYMAP=us FONT=lat2-...
by psgarcha92
Sun Feb 24, 2013 4:10 pm
Forum: Other projects
Topic: 320x240 LCD with integrated SSD1289 controller
Replies: 194
Views: 117336

Re: 320x240 LCD with integrated SSD1289 controller

@XaLKiDEoS So basically the display i posted as the link would work, as it is almost identical to the spritesmods.com one right?? Have you been able to display anything on your display? and would the touch module also work fine with the Pi? Am waiting for someone to get it working and then i would g...
by psgarcha92
Wed Feb 20, 2013 5:49 pm
Forum: Other projects
Topic: 320x240 LCD with integrated SSD1289 controller
Replies: 194
Views: 117336

Re: 320x240 LCD with integrated SSD1289 controller

Hey guys, Would this screen work with a Raspberry pi? it is based on the above mentioned SSD1289 controller http://www.ebay.com/itm/1pcs-3-2-inch-320x240-Touch-LCD-A-Screen-Touch-SPI-ADS7843-LCD-SSD1289-TFT-/251114817545?pt=LH_DefaultDomain_0&hash=item3a779c0809 also it has a touchscreen...would tha...
by psgarcha92
Fri Feb 15, 2013 6:52 am
Forum: Other projects
Topic: STM32F4DIS-LCD, can this be interfaced with a RasPi?
Replies: 2
Views: 1106

STM32F4DIS-LCD, can this be interfaced with a RasPi?

Hey guys, i found this 3.5" Touchscreen with 320x240 resolution on element14.com at http://in.element14.com/stmicroelectronics/stm32f4dis-lcd/mod-stm32f4-3-5inch-touch-screen/dp/2250207?Ntt=2250207&ICID=ap-2250207-np2 it has a STM32 based controller, question is, can anybody interface it with a Rasp...
by psgarcha92
Mon Oct 29, 2012 2:32 pm
Forum: Beginners
Topic: How do i perform live backup of Raspi SD card?
Replies: 5
Views: 2292

Re: How do i perform live backup of Raspi SD card?

EDIT to the above post: Now i added my un-powered hub with a mouse, USB pendrive and keyboard attached. Booted just fine.I Misbehaved/roughed up/dirty shutdown the RasPi a few more times at the first terminal and loading desktop. Still worked fine. No lost files, no corrupt SD partitions. The unpowe...
by psgarcha92
Mon Oct 29, 2012 2:09 pm
Forum: Troubleshooting
Topic: PANIC: VFS: Unable to mount root fs on unknown-block(179,2)
Replies: 13
Views: 6748

Re: PANIC: VFS: Unable to mount root fs on unknown-block(179

I am here to update the thread on the issue i had just posted. After what was happening over and over again with my element14 (preloaded) purchased SD Card, i decided to try a 4GB Micro SD i had lying around collecting dust. First i formatted it with SD Formatter properly, as the SD and SDHC cards a...
by psgarcha92
Mon Oct 29, 2012 1:52 pm
Forum: Beginners
Topic: How do i perform live backup of Raspi SD card?
Replies: 5
Views: 2292

Re: How do i perform live backup of Raspi SD card?

I am here to update the thread on the issue i had just posted. After what was happening over and over again with my element14 (preloaded) purchased SD Card, i decided to try a 4GB Micro SD i had lying around collecting dust. First i formatted it with SD Formatter properly, as the SD and SDHC cards a...
by psgarcha92
Mon Oct 29, 2012 1:59 am
Forum: Beginners
Topic: How do i perform live backup of Raspi SD card?
Replies: 5
Views: 2292

Re: How do i perform live backup of Raspi SD card?

@Vindicator, It happened again. I am hating every minute of it. Okk, i do not overclock it in forced mode, but in the turbo_mode preset in the raspi_config menu. It almost always happens at unclean shutdowns. I get Panic : VFS unable to mount root fs at (179,2) pid 1) due to keyboard entry >kdb (rou...
by psgarcha92
Mon Oct 29, 2012 1:05 am
Forum: Troubleshooting
Topic: PANIC: VFS: Unable to mount root fs on unknown-block(179,2)
Replies: 13
Views: 6748

Re: PANIC: VFS: Unable to mount root fs on unknown-block(179

Guys, ok, i have been shutting down my pi using sudo halt, or rebooting via Sudo Reboot. My story goes like this, i have been having problems with this bug for the last 24 hours or so. I have literally written to my card, updated it, upgraded it and i just fell back to square one because of this err...
by psgarcha92
Sun Oct 28, 2012 10:50 pm
Forum: Beginners
Topic: How do i perform live backup of Raspi SD card?
Replies: 5
Views: 2292

How do i perform live backup of Raspi SD card?

Hey guys... in the last 24 hours i have had to rewrite the Raspi Image onto the SD card 5-6 times. Everytime, with the system updated and upgraded, i managed to do something or the other that would give me a kernel panic at boot. I am sick of getting the SD Card out of my self made Raspi Casing, whi...
by psgarcha92
Mon Oct 22, 2012 7:53 pm
Forum: Other projects
Topic: Why not a DIY Power Supply?
Replies: 16
Views: 12604

Re: Why not a DIY Power Supply?

@mahjongg my prime concern is running the setup all day long might heat it up a little bit. With ambient temperatures high around here, and the Overclock limit set on the Raspi, i would like to keep it cool incase something makes it reach the 85 degrees Celsius where it will be underclocked again be...
by psgarcha92
Sat Oct 20, 2012 5:28 am
Forum: Other projects
Topic: Why not a DIY Power Supply?
Replies: 16
Views: 12604

Re: Why not a DIY Power Supply?

And how about putting a fan on the Diode bridge? Would that cause any kind of noise for the pi? Please note the fan would be placed on the output of the diode bridge.


Regards
by psgarcha92
Fri Oct 19, 2012 11:45 am
Forum: Other projects
Topic: Why not a DIY Power Supply?
Replies: 16
Views: 12604

Re: Why not a DIY Power Supply?

@mahjongg...youre right. It would be better with a variable voltage regulator like the LM2596. But now i am thinking of having the RasPi and its power supply with a fan in the same casing. The fan i want to run at full RPM always. So can i power the fan from after the diode bridge before the Regulat...
by psgarcha92
Thu Oct 18, 2012 8:42 pm
Forum: Other projects
Topic: Why not a DIY Power Supply?
Replies: 16
Views: 12604

Why not a DIY Power Supply?

Hey guys.... I have been looking around on the internet, reading how most of the problems a Raspi user encounters, are caused by power supplies....i too am having trouble getting a legitimate Power Adapter for the Pi. At the same time, i am tempted to think, why hasn't anybody come up with a DIY Pow...

Go to advanced search