milhouse wrote:viewtopic.php?f=66&t=113979

thank you

Hi, Is there a build config file placed somewhere in the system while using kernel 4.0? It seems /proc/config.gz is missing from 4.0. Maybe a configuration option is not set to be enabled: /proc/config.gz isn't available in Debian, because the config is provided in /boot/config-*, no need for the in...

you have more than one RPi ? install distcc on them all that's how I was doing it when I was building kernels ;) Two years ago I played with icecc. I created a cross toolchain also and the PCs helped doing the build that was started on the pi. http://logout.hu/dl/upc/2012-11/23987_starview.png (The...

Yeah, it is still buggy. With 2013-09-25-wheezy-raspbian I got HW_CFG_LRST_ and MII_ACCESS failures after a half minute when I start using the attached Alcor micro AU9540 (058F:9540) smartcard reader. The same failure occures with direct to raspi-card reader and raspi-external hub-card reader setup....

Use google ;) https://github.com/jolicloud/linux-firmware/blob/master/v4l-cx2341x-enc.fw Probably you need to copy that file to /lib/firmware directory. We tried the Europian (WinTv HVR 1900 Pal, DVB-C/T) version of the tuner with no luck. The smsc usb hub on the RasPi made unusable it for DVB-C bec...

For a working dongle is not enought the rtl2832u chip support, but also required for the other (rf tuner) chip inside. I used rtl2832u+e4000 tuner with this driver: https://github.com/ambrosa/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0 The new r820t - as i know - currently is not supported u...

I managed to use the latest media tree with 2012-09-18-wheezy-raspbian. Here are some script that automates most of the build steps. ;) First, we need the source for the kernel that is used in that distribution (because it it not available in package on raspbian): https://gist.github.com/3893319 It ...

Is there a kernel-source package that is in sync with the actual kernel of the current raspbian kernel binary? I know the source is on github, and I read how to find out the right revision from github. Also I found a required file here: https://raw.github.com/raspberrypi/firmware/master/extra/Module...