Go to advanced search

by renice123
Sat Jan 18, 2020 6:43 pm
Forum: Troubleshooting
Topic: Volume Control not working
Replies: 2
Views: 64

Re: Volume Control not working

This is another Debian-Buster glitch. Broke in Stretch. There are several solutions - the first is to put a software volume control (softvol). The second is to put a jack (will expand the possibilities). Third - connect to an external amplifier with volume control. This is the right decision. Yes. I...
by renice123
Sat Jan 11, 2020 5:16 pm
Forum: Troubleshooting
Topic: PI 4 USB audio clicks/pops
Replies: 15
Views: 724

Re: PI 4 USB audio clicks/pops

Games with Raspberries entertain elderly men. Just like a joke. Last week I did an “upgrade” to my computers (and my pockets were leaky). And if you are so annoyed by clicks, then try the following method. After some experiments, I almost got rid of the clicks and probably found another reason for t...
by renice123
Mon Dec 30, 2019 5:23 pm
Forum: Troubleshooting
Topic: Rpi 4 4GB. Wifi suddenly very slow...
Replies: 9
Views: 311

Re: Rpi 4 4GB. Wifi suddenly very slow...

try to give commands in the terminal

iw dev
sudo iw wlan0 scan
sudo ip link set wlan0 up
iw wlan0 link
by renice123
Mon Dec 30, 2019 8:28 am
Forum: Troubleshooting
Topic: Rpi 4 4GB. Wifi suddenly very slow...
Replies: 9
Views: 311

Re: Rpi 4 4GB. Wifi suddenly very slow...

I see that you are using wireless devices in a range close to wi-fi. Try turning off the wireless mouse and keyboard first. Then you have the features of working with the display. Set the display resolution to minimum (1200x800). Do you use USB3 ports? If so, disconnect the devices from these ports....
by renice123
Mon Dec 30, 2019 8:04 am
Forum: Troubleshooting
Topic: red lights and no display
Replies: 2
Views: 125

Re: red lights and no display

What is your memory card and what operating system? Raspberries fourth version? Perhaps the easiest way to “fix” the problem is to simply take another memory card and reinstall Raspbian on it. Of course, I would like to clarify the brand of the memory card and its capacity for a start) And what prog...
by renice123
Mon Dec 30, 2019 7:58 am
Forum: Troubleshooting
Topic: Pi 4b Not Booting
Replies: 14
Views: 532

Re: Pi 4b Not Booting

As I understand it, playing with large cards often becomes a lottery. This is due to the fact that large cards are faked, as well as to attempts by manufacturers to put "special controllers" in such cards. For example, on the forums, Debian complained that this fate befell Samsung Evo + and now in L...
by renice123
Sun Dec 29, 2019 8:12 pm
Forum: Troubleshooting
Topic: Constant random crashes no consistent pattern
Replies: 28
Views: 736

Re: Constant random crashes no consistent pattern

You know, I already have a feeling that the most correct thing is to lay out a list of memory cards that definitely work in Raspberry 4 Because the number of messages about “32 GB bad memory cards” is growing, but there is still no new list of “good memory cards”. So, I know that they complain about...
by renice123
Sun Dec 29, 2019 7:56 pm
Forum: Troubleshooting
Topic: Constant random crashes no consistent pattern
Replies: 28
Views: 736

Re: Constant random crashes no consistent pattern

Ok, I took messages about the need for radiators. You are right, this is superfluous in this topic. But isn’t the topic already closed? It seemed to me that the problem is that 32 GB memory cards do not work (that is, the same error that they write about here in another thread https://www.raspberryp...
by renice123
Sun Dec 29, 2019 5:53 pm
Forum: Troubleshooting
Topic: Pi 4b Not Booting
Replies: 14
Views: 532

Re: Pi 4b Not Booting

Yes, just the other day I received another message about poor performance with a 32 GB memory card As soon as the user installed 8 GB, the computer started working. Link here https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=260013 If you have not seen this tape, you can fully see it here http...
by renice123
Sun Dec 29, 2019 5:35 pm
Forum: Troubleshooting
Topic: Pi 4b Not Booting
Replies: 14
Views: 532

Re: Pi 4b Not Booting

Hello! Does raspberry blink three times without a memory card? Try counting three or four blinks? Do not try to alter the EEPROM (as almost all messages show, this does not lead to anything) If there are only three LED on without a memory card, you will most likely have to return the computer to the...
by renice123
Sun Dec 29, 2019 9:05 am
Forum: Troubleshooting
Topic: White Noise from the 3.5mm
Replies: 2
Views: 123

Re: White Noise from the 3.5mm

You are using a low quality dc dc converter with poor power output. But you wonder why the acoustic line sensitive to quality of food makes noise ??? It's like pouring diesel fuel into an airplane and waiting for the airplane to take off)) I also use a dc dc converter, but I use industrial converter...
by renice123
Sun Dec 29, 2019 8:42 am
Forum: Troubleshooting
Topic: Difference between 3.3V pin and normal pin
Replies: 3
Views: 199

Re: Difference between 3.3V pin and normal pin

Connecting power devices to a 3.3V pin is a bad idea. This is the output of the voltage converter, and very gentle. It was the incorrect use of PMIC that was the reason for the numerous cases of the death of Malin 3+ (accidentally shortened the nearby contacts +5 and +3.3 V or overloaded 3.3) Moreov...
by renice123
Sat Dec 28, 2019 1:30 pm
Forum: Troubleshooting
Topic: Raspberry Pi 4 stuck on Rainbow Screen
Replies: 7
Views: 295

Re: Raspberry Pi 4 stuck on Rainbow Screen

I gave a link to a discussion of this topic (32 GB cards). I can’t say anything more, besides the fact that I often see recordings of some people, they claim that they have problems with 32 GB memory cards. I am not a manufacturer of memory cards and am not interested in protecting certain memory ca...
by renice123
Sat Dec 28, 2019 10:33 am
Forum: Troubleshooting
Topic: Raspberry Pi 4 stuck on Rainbow Screen
Replies: 7
Views: 295

Re: Raspberry Pi 4 stuck on Rainbow Screen

I think you should write here https://www.raspberrypi.org/forums/view ... 8&t=248968 There is a known problem with memory cards greater than or equal to 32 Gb There are still error messages
by renice123
Sat Dec 28, 2019 9:11 am
Forum: Troubleshooting
Topic: [Pi 4B] 4k 60Hz HDMI suddenly stops, black screen, red LED going off
Replies: 14
Views: 1100

Re: [Pi 4B] 4k 60Hz HDMI suddenly stops, black screen, red LED going off

Perhaps you need to look for a common in two cases. I see you are using a gaming mouse and an interesting memory card with controller DDR50 – DDR up to 50 MHz ,. Do you have toshiba exceria? How well does it work (it's a personal interest, I also think to buy this card from Japan)? It also seems to ...
by renice123
Fri Dec 27, 2019 4:47 pm
Forum: Troubleshooting
Topic: No USB audio input from dongle on Pi4
Replies: 4
Views: 158

Re: No USB audio input from dongle on Pi4

You may need to manually download the modules for your card. Unfortunately, I also encountered this problem - Buster does not work well with my sound card and freezes. I rolled back to the Volumio OS. What sound cards do you use?
by renice123
Fri Dec 27, 2019 7:01 am
Forum: Troubleshooting
Topic: Pi 4b not booting
Replies: 1
Views: 125

Re: Pi 4b not booting

Why is it unlikely that just two computers do not work as soon as they are received? In our country, there is such a thing as “manufacturing defect”. This means that the negligent manager ordered a batch of devices from some factory known for low-quality details and a low work culture. As a result, ...
by renice123
Thu Dec 26, 2019 8:25 pm
Forum: Graphics, sound and multimedia
Topic: How to Recycle Vizio Sound Bar Speakers to be used by Raspberry pi??
Replies: 6
Views: 413

Re: How to Recycle Vizio Sound Bar Speakers to be used by Raspberry pi??

I also use Raspberry connected to acoustics (although I have an old-school stereo speaker system at 100 W =) I did not experience any difficulties with Raspberry and acoustics, moreover, such solutions are popular among audiophiles in our country. However, there are two mandatory requirements for a ...
by renice123
Thu Dec 26, 2019 8:01 pm
Forum: Graphics, sound and multimedia
Topic: Volumio & Raspbian & jackd2. Hi-fi sound over the network =)
Replies: 4
Views: 628

Re: Volumio & Raspbian & jackd2. Hi-fi sound over the network =)

Personally, the sound card from Native Instruments started to work badly on my Buster https://www.native-instruments.com/en/ I wrote about this at the very beginning of the message. These manufacturers have always advertised Linux support. Also on Volumio (like on my home computer) this sound card w...
by renice123
Thu Dec 26, 2019 7:33 pm
Forum: Troubleshooting
Topic: Pi4 solid red and green led
Replies: 39
Views: 3242

Re: Pi4 solid red and green led

As far as I know, Raspberry 4 uses MaxLinear's MxL7704, this is a more advanced version of PMIC than the previous one. It would be interesting if the owners of the dead microcomputers could give Raspberry for repair (for example, in the service center where they repair cell phones or laptops) and as...
by renice123
Thu Dec 26, 2019 7:10 pm
Forum: Troubleshooting
Topic: RPi 4 4GB CPU spikes and 'freezes' for a up to 5 seconds.
Replies: 12
Views: 485

Re: RPi 4 4GB CPU spikes and 'freezes' for a up to 5 seconds.

I’m just not struggling to increase productivity, but trying to reduce productivity. I have several microcomputers and some of them I use in headless mode to solve specific, non-resource-intensive tasks. Teensy controllers are also connected to them. For Raspberries 3 there are many ways to reduce p...
by renice123
Wed Dec 25, 2019 4:28 pm
Forum: Troubleshooting
Topic: wlan0 does not start when ethernet cable is disconnected
Replies: 10
Views: 293

Re: wlan0 does not start when ethernet cable is disconnected

Better harder than simple =) Modify /etc/dhcpcd.conf as follows. Here is an example which configures a static address, routes and dns. interface eth0 static ip_address=10.1.1.30/24 static routers=10.1.1.1 static domain_name_servers=10.1.1.1 interface wlan0 static ip_address=10.1.1.31/24 static route...
by renice123
Wed Dec 25, 2019 3:39 pm
Forum: Troubleshooting
Topic: wlan0 does not start when ethernet cable is disconnected
Replies: 10
Views: 293

Re: wlan0 does not start when ethernet cable is disconnected

As far as I understand the author of the topic, there is no wpa encryption, therefore, you can not use the wpa_supplicant.conf file (which is needed if encryption is used) Therefore, it is more like routing errors or something like that, when a computer cannot receive network data via wlan, but rece...

Go to advanced search