Raspberry Pi Forums

CodenameV

After dropping out of X ( unless you boot to terminal ) have you tried running the command using sudo . I remember a while back I had a simular problem and it was for some reason I had lost permission to the frame buffer , which in turn produced a simular error message. If sudo <executable> doesn't ...

CodenameV

CodenameV, I spoke with jon (from Paintown IRC channel) and he told me that SDL engine doesn't have a good performance on RPi (For Paintown), he suggested me to use Allegro 5. I don't know if was a good idea but I tried to compile it with Allegro 5 directly on RPi but I got random errors during the...

CodenameV

The SDL engine to start with and heres a link to the compiled file sitting on my onedrive https://onedrive.live.com/redir?resid=FA5C8776D01160DA%21182 for anyone whos interested :) , download the source from the above link , untar , when completed untar the compiled file and copy into the folder, th...

CodenameV

I managed to compile paintown today, but in its current state its very slow, if I get chance I will try and optimize it more towards the PI hardware , if anyone else fancies trying the compiling is simple , just download the source from the project web site http://paintown.sourceforge.net/ I downloa...

CodenameV

CodenameV, Is it take a while to load a pak file? I tried 6 paks but all of them freezes in black screen. The menu screen works normally but I tried to run paks with and without menu screen and only black screen. Hi using the included tools unpack the pak file and try it again , I remember having a...

CodenameV

I'll certainly try to give it a go , as for the compiled openbor if anyone would like it ,it's currently on my skydrive so send me you email address ( PM if you prefer ) and I'll share it to you

CodenameV

CodenameV

this is what i get: pi@raspberrypi ~ $ wget http://apt.duke4.net/pool/main/d/duke3d-shareware/duke3d-shareware_1.3d-21_all.deb --2013-05-26 15:21:48-- http://apt.duke4.net/pool/main/d/duke3d-shareware/duke3d-shareware_1.3d-22_all.deb Resolving apt.duke4.net (apt.duke4.net)... 88.190.14.129 Connecti...

CodenameV

Anyone else having problems getting OpenBor to boot? Mine goes straight to a black screen when I execute the runopenbor.sh and just hangs there, making me reboot the Pi. Do I need to run this through the terminal? Thank You InsertCoin25 I've email you over a step by step on how I got this to work ,...

CodenameV

I have got a compiled version ready in a tar file if anyone would like it just drop me your email address , the file is just under 2mb in addition you'll need is to download a openbor game pak , unpack it using the tools and move into the pak folder and then play-a-way :) my favs are golden axe and ...

CodenameV

Just in case people have the gfx.wad missing I noticed that the pak files within the id1 folder need to be lowercase otherwise you'll get this error

CodenameV

So system_directors is unset for me, essentially everything is grayed out. I placed the file in ~/Retropie/roms/psx/, and the file is SCPH1001.bin. Emulation station sees it because I enabled .bin inputs, but pcsx rearmed does not. If I change system_directory to, say, /home/pi/emusystem/, It still...

CodenameV

Shawty wrote:Yes, indeed you can't give TOS images away, but I do believe that there is an open source version called "Open TOS" floating around.

I do remember seeing it once over when looking for Atari emulators.

How about this for an option

http://sourceforge.net/projects/emutos/

CodenameV

I would be more than happy to to a step by step , but to be honest , I'm pretty new to all this too, If you go to https://github.com/gemrb/gemrb there is ab install file there explaining the tools you'll require and the Libraries you'll need ( using the apt-cache search "library" at a shell prompt c...

CodenameV

On my system if I use
fbset -xres 384 -yres 256 -depth 16

I get a much bigger play area , people will probably have to try different combos for different displays

CodenameV

CodenameV

I've done a little more work today on beats of rage for the PI. And managed to get it working :) clone from https://github.com/rofl0r/openbor.git follow the instructions to compile , I used NO_GL=1 BUILD_DEBUG=1 while making copy over a Pak file to the relevant folder. once compiled before executing...

CodenameV

Hi all , this engine has been mentioned a few times on the forum, so I thought a boring Saturday afternoon time to test it, All I had to do was clone from here https://github.com/gemrb/gemrb.git compile and install, making sure to have the prerequisite packages. copy over the data files from one of ...

CodenameV

Just to add to what I was saying, tried the pcsx_rearmed for retroarch, and was playing ridge racer and a very playable speed again a few sqweeks but still , fantastic work from everyone involved

CodenameV

CodenameV

Hi All, Last night I tried the new alsathread option , which worked a lot better on my config, was still a little stutterey on some games, then I started to re-read some threads , I added pcm.!default { type hw card 0 } ctl.!default { type hw card 0 } to /etc/asound.conf then on top of that I set th...

CodenameV

Theres always openbor will need so tweaking I guess but it works great on the gp32

CodenameV

Hi All, think I may have found a typo in retropie_setup.sh , in the configuration file creation then pc engine has a platform id of 42 , this should be 34 . If you run the scraper without changing this it bombs out, hope this helps

CodenameV

CodenameV

billb wrote:Thanks! That does take care of the color problem when running from terminal, although it doesn't fill the screen as much.

This could maybe be sorted by choosing a lower resolution for the entire Pi , using SDL_FB_BROKEN_MODES=1 forces SDL to use the current video mode

CodenameV

[quote="billb" It works properly under X but if you run it straight from a terminal the colors are off. :? [/quote] I think this could be a problem with the particular mode SDL is selecting , use SDL_FB_BROKEN_MODES=1 ./powder this will force the current video mode under the terminal instead of chan...

CodenameV

Hi all , I finally got Cabrio to compile in an emulated enviroment my changes were in video.c I changed line 151 avcodec_decode_video to avcodec_decode_video2 and remove packet->data and packet->size and replace with just packet line 180 avcodec_decode_audio to avcodec_decode_audio4 and remove ,audi...

CodenameV

Your script is great really saves a lot of time, I start it going overnight the next morning , I have completely compiled binaries :) , I have been testing the pc engine libretro fork which so far works really well its address is https://github.com/libretro/mednafen-psx-libretro.git maybe you could ...

CodenameV

The keyboard is working now. I have made the source code compile on Debian, but it is a lot slower than cross-compiling, and less convenient than using the pre-built binaries. source at: github.com/hexameron/RTCW-SP-arm excellent I can move and look around with nice speed , when the baddies arrive ...

Search found 29 matches

Re: Launch Zdoom without X

Re: Street Of Rage Remake

Re: Street Of Rage Remake

Re: Street Of Rage Remake

Re: Street Of Rage Remake

Re: Street Of Rage Remake

Re: Time to kick *ss and chew bubble gum...

Re: Street Of Rage Remake

Re: Street Of Rage Remake

Re: GLQuake-ES

Re: Pcsx-Rearmed Bios RetroPie

Re: STAROS - Atari ST (GEM+TOS)

Re: Infinity Engine Emulator ... Baldur's Gate ,etc

Re: Street Of Rage Remake

Re: Street Of Rage Remake

Infinity Engine Emulator ... Baldur's Gate ,etc

Re: RetroArch Emulator Frontend

Re: RetroArch Emulator Frontend

Re: Street Of Rage Remake

Re: RetroPie Setup - Auto-installer/updater for RetroArch ga

Re: Powder - graphical roguelike

Re: Powder - graphical roguelike

Re: Cabrio front end - lets try to make it work

Re: RetroPie Setup - Auto-installer/updater for RetroArch ga

Re: Castle Wolfenstein