Go to advanced search

by stevemarsbar
Wed Jun 26, 2019 8:23 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: Auvidea B102 HDMI>CSI board
Replies: 0
Views: 806

Auvidea B102 HDMI>CSI board

Hi All, I have an Auvidea B102 HDMI>CSI board connected to a Raspberry Pi 2 Model B. The B102 supports 4 lanes however I realise the Pi only supports 2 lanes of data. I have made a ribbon cable to convert the 22 pin connector on the B102 to the 15 pin Camera port on the Pi. I have checked all pin-ou...
by stevemarsbar
Wed Jun 26, 2019 1:48 pm
Forum: Troubleshooting
Topic: Raspbian Buster and LIRC
Replies: 6
Views: 4504

Re: Raspbian Buster and LIRC

Thanks! The final steps to config LIRC on Buster to send IR commands were: Add the following line to /boot/config.txt and reboot: dtoverlay=gpio-ir-tx,gpio_pin=17 Attempt install of lirc (It wiill fail but will create directory structure etc): sudo apt install lirc Rename the LIRC config file: sudo ...
by stevemarsbar
Tue Jun 25, 2019 4:20 pm
Forum: Troubleshooting
Topic: Raspbian Buster and LIRC
Replies: 6
Views: 4504

Raspbian Buster and LIRC

Hi All, I'm struggling to get LIRC to work on Raspbian Buster. It's a completely new install of Raspbian Buster downloaded today. I have added the following line to /boot/config.txt and rebooted: dtoverlay=gpio-ir,gpio_pin=24 dtoverlay=gpio-ir-tx,gpio_pin=25 and then installed Lirc via command: sudo...

Go to advanced search