Go to advanced search

by bricolodu13
Thu Aug 02, 2018 6:44 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread.
Replies: 838
Views: 345964

Re: STICKY: The I2S sound thread.

Hello Hias, Once again I'm back with this Right justified affair. Although I made some progress with a hardware double shif register (2x X7), I still prefer to try to make everything working from the driver. I think I'm almost done with your driver. First of all, I had to add "dai-tdm-slot-num = <2>...
by bricolodu13
Thu May 17, 2018 1:44 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread.
Replies: 838
Views: 345964

Re: STICKY: The I2S sound thread.

Hello Helias, Today I tried again, because in the mean time, I have received the 74HCT164 a shift register that I had ordered. So here is the situation : 1/ with the I2S driver (hifiberry_dac) -> TDA1543A Sound is ok up to 30% software volume, it is around the 100% volume 2/ with the right justified...
by bricolodu13
Tue May 08, 2018 3:57 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread.
Replies: 838
Views: 345964

Re: STICKY: The I2S sound thread.

Hello Helias, Thank you very much for your help. However, I stil get the same bad sound, unfortunately ! I also tried again squeezelite ~/squeezelite $ ./squeezelite -o sysdefault:CARD=GenericRJ -a 20:4:16:1 -s 192.168.1.13 "16" in -a 20:4:16:1 means force 16 bits With Squeezelite I get a software v...
by bricolodu13
Tue May 08, 2018 9:17 am
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread.
Replies: 838
Views: 345964

Re: STICKY: The I2S sound thread.

Hello Hias, Thank you for trying to sort this out with me ! I checked again, and yes I was forcing the file to 16bits. I also tried with aplay, as I can monitor what is going on : :[email protected]:~ $ sudo aplay -vv -f cdr test.wav Warning: format is changed to S16_LE Playing WAVE 'test.wav' : Signed...
by bricolodu13
Fri May 04, 2018 4:19 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread.
Replies: 838
Views: 345964

Re: STICKY: The I2S sound thread.

Hello Hias, I'm back with my TDA1543A. I finally got some time to spent today to try to get correct sound out of it, but failled to do so ! :oops: Here is my config.tx # Enable audio (loads snd_bcm2835) #dtparam=audio=on #dtparam=i2s=on dtoverlay=0W1audio-soundcard,alsaname=0W1audio Listing soundcar...
by bricolodu13
Thu Apr 12, 2018 5:08 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread.
Replies: 838
Views: 345964

Re: STICKY: The I2S sound thread.

Thank you !
by bricolodu13
Thu Apr 12, 2018 4:56 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread.
Replies: 838
Views: 345964

Re: STICKY: The I2S sound thread.

Thank you Hias, Sorry I missed it! Now, I get the board listed with your code, however I didn't tested it yet with the TDA1543A. I don't understand though why you make reference to spdif as my dac is japanese format right justified. I have changed your code from left justifed to right justified, by ...
by bricolodu13
Thu Apr 12, 2018 4:49 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: PT8211 I2S ASOC driver
Replies: 6
Views: 968

Re: PT8211 I2S ASOC driver

Thank you pvdmeer, Thank you Hias, Hias, I get the board listed with your code, however I didn't tested it yet with the TDA1543A. I don't understand though why you make reference to spdif as my dac is japanese format right justified. I have changed your code from left justifed to right justified. Be...
by bricolodu13
Thu Apr 12, 2018 4:15 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: STICKY: The I2S sound thread.
Replies: 838
Views: 345964

Re: STICKY: The I2S sound thread.

Hello, I'm new to all this, sorry ! I have spent a couple of hours reading and trying to build a module for my dac without success. I use a TDA1543A (right justified, Japanese format) here is my .dts // Definitions for TDA1543A-SoundCard /dts-v1/; /plugin/; / { compatible = "brcm,bcm2708"; [email protected]...
by bricolodu13
Wed Apr 11, 2018 6:58 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: PT8211 I2S ASOC driver
Replies: 6
Views: 968

Re: PT8211 I2S ASOC driver

Hello pvdmeer,

I have the same need for another Japanese format DAC.

Could you post your code ?

It would help.

Thank you,
Jean
by bricolodu13
Thu Jul 27, 2017 11:13 pm
Forum: Compute Module
Topic: CM3 Availlability ?
Replies: 1
Views: 567

CM3 Availlability ?

Hello,

I plan to use CM3 for a project, however, I'm scarry about module availlability as there are no module at RS nor Farnell in France.

I may need a few thousand/year !

Should i forget about Pi ?

Best regards,
Jean
by bricolodu13
Sat Jun 11, 2016 8:06 am
Forum: Troubleshooting
Topic: Ethernet doesn't work anymore
Replies: 5
Views: 1249

Re: Ethernet doesn't work anymore

Hello, I made the usb hub working again, unfortunately it doesn't work on the pi zero. I have checked connections on the Pi usb pins, it is ok. Should I plug in my keyboard in, I can use it. Should I plug a usb soundcard, it looks like working. Should I plug the Ethernet adaptor, it also looks like ...
by bricolodu13
Fri Jun 10, 2016 10:02 pm
Forum: Troubleshooting
Topic: Ethernet doesn't work anymore
Replies: 5
Views: 1249

Re: Ethernet doesn't work anymore

Hello, I'm experimenting the exact same problem with a brand new Pi Zero. It worked out of the box with a ethernet / usb adaptator.. I then switched to a wifi dongle, it worked fine, then during the installation it losts its ethernet connection. Since then, no way to reconnect. I have flashed the OS...
by bricolodu13
Tue Jan 26, 2016 12:13 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: I2S Success (at last) !
Replies: 106
Views: 38337

Re: I2S Success (at last) !

Hello,

I just received some OSH boards from MCHamster
Did someone has already build this kit ?
Please could you send me a schematic to build the ADCs, as it doesn't look it is an exact "copy" of the original sparkfunkit that is no longuer available.


Thank you,
Jean
by bricolodu13
Sun Jul 19, 2015 4:57 pm
Forum: Graphics, sound and multimedia
Topic: RPi and real-time, low-latency audio
Replies: 189
Views: 68242

Re: RPi and real-time, low-latency audio

Now I have another challenge, I want to make FIR filtering on squeezelite And yes I'm still newbie to linux and I'm fighting with using Jconvolver to make DRC on a Raspberry pi used as a squeezebox player This is what I want to achieve : send the sound to Jack, then to jconvolver then to hifiberry I...
by bricolodu13
Sun Jul 19, 2015 4:47 pm
Forum: Graphics, sound and multimedia
Topic: RPi and real-time, low-latency audio
Replies: 189
Views: 68242

Re: RPi and real-time, low-latency audio

Ok, I solved that one ;)

Looks like I had to re-write a good config. txt file
by bricolodu13
Wed Jun 24, 2015 5:18 pm
Forum: Graphics, sound and multimedia
Topic: RPi and real-time, low-latency audio
Replies: 189
Views: 68242

Re: RPi and real-time, low-latency audio

Hello, Sorry if it is stupid, I'm a stupid neewbie :oops: I have tried and succeeded to complile two different kernel with fully premptible RT Patch and 1000Hz : Diet Pi (http://fuzon.co.uk/phpbb/viewtopic.php?f=8&t=6) with Real time patch (3.18.13-RT10+) Navio (http://docs.emlid.com/Downloads/Real-...
by bricolodu13
Wed Jul 02, 2014 4:13 pm
Forum: Français
Topic: Tuto RaspBerry + client DLNA audio
Replies: 6
Views: 13813

Re: Tuto RaspBerry + client DLNA audio

Bonjour,

Je n'arrive pas à le faire fonctionner en mode "headless".
Que faut-il modifier ?

Merci de votre aide

Jean
by bricolodu13
Fri Jun 13, 2014 10:38 am
Forum: Advanced users
Topic: qjackctl and jack
Replies: 18
Views: 8042

Re: qjackctl and jack

Ok, I succeeded in making jack to work with Squeezeslave but not with Squuezelite, don't know why. It is not working headless (through SSH) don't know why either. So first I open a Terminal (console) on the desktop and launch Jack jackd -P70 -p16 -t2000 -dalsa -r44100 -S & Then, I open a second Term...
by bricolodu13
Thu Jun 12, 2014 3:03 pm
Forum: Advanced users
Topic: qjackctl and jack
Replies: 18
Views: 8042

Re: qjackctl and jack

Hello, I'm hardly trying to do Digital Room Correction with a Raspberry Pi running Squeezelite. I'm trying this under a fresh Raspbian install first as it is the more docummented. I have a ES9023 Terradack I2S connected to my Pi. For the time being I have Squeezelite running ! I succeeded in install...
by bricolodu13
Sat Jun 01, 2013 4:46 pm
Forum: Media centres
Topic: piCorePlayer a dedicated microcore and squeezelite player
Replies: 214
Views: 91232

Re: piCoPlayer a dedicated microcore and squeezelite player

Hello Zsolt,

I'm sorry this was just a borrow DAC, it's not mine...

Should I have it again, I'll try.

Best regards,
Jean
by bricolodu13
Sun May 26, 2013 7:24 pm
Forum: Media centres
Topic: piCorePlayer a dedicated microcore and squeezelite player
Replies: 214
Views: 91232

Re: piCoPlayer a dedicated microcore and squeezelite player

Hello Steen, I just tried the V 09 with the USB hw Fix, the Teradak that was not working fine looks fine now. I'll report latter on the Amanero as I'm still missing some capacitor for the DAC that will be hoocked to it. Regarding the Naim, it was a borrow, so I can't report any change, but I'm confi...
by bricolodu13
Wed May 15, 2013 12:50 pm
Forum: Media centres
Topic: piCorePlayer a dedicated microcore and squeezelite player
Replies: 214
Views: 91232

Re: piCoPlayer a dedicated microcore and squeezelite player

Hello, I have updated the DAC page on your web page CMEDIA CL-SU4CHA ok upto 48KHz but take care LEFT and Right are inverted Terratec Aureon Dual USB ok upto 48KHz but take care LEFT and Right are inverted Teradak TDA1543 NOS DAC -V3.1D (TENOR TE7022L) ok upto 96KHz (some noise, small pops) Audiophi...
by bricolodu13
Sun Apr 21, 2013 12:03 pm
Forum: Other
Topic: Tiny Core Linux
Replies: 67
Views: 29594

Re: Tiny Core Linux

Hello, Following the Squeezelite post on Tiny Core, i would like to do the same "manually" to undestand what am I doing and do the same with GMediaRender. My first problem is when I want to get Dropbear, I always get an error file "doesn't exist" At the command promt tce s search d Dropbear - choose...
by bricolodu13
Sat Apr 20, 2013 6:04 pm
Forum: Media centres
Topic: piCorePlayer a dedicated microcore and squeezelite player
Replies: 214
Views: 91232

Re: piCoPlayer a dedicated microcore and squeezelite player

Ok got it
login : tc
password : nosoup4u
:D

Go to advanced search