Go to advanced search

by joural
Sun Jul 28, 2019 10:30 am
Forum: HATs and other add-ons
Topic: Ssd1322 oled display
Replies: 7
Views: 243

Re: Ssd1322 oled display

I thought luna.oled gonna do just that.
https://luma-oled.readthedocs.io/en/latest/intro.html#
by joural
Sun Jul 28, 2019 8:14 am
Forum: HATs and other add-ons
Topic: Ssd1322 oled display
Replies: 7
Views: 243

Re: Ssd1322 oled display

Ill try it with rpi 0 to minimize damages. ;-) It seems like people connecting it with 7 wires, 4 for spi, 2 for power , dont know what last one is for.
Cheers
by joural
Sat Jul 27, 2019 10:52 pm
Forum: HATs and other add-ons
Topic: Ssd1322 oled display
Replies: 7
Views: 243

Re: Ssd1322 oled display

Thank you Andyroo It is 16pin version, came from aliexpress, but manufacter search didnt reveal anything, identicaly looking from different seller i found this table, if it will go up in the smoke oh well... With this table and pressumption of swaping to spi 4 wire interface, how would i go about co...
by joural
Sat Jul 27, 2019 9:25 pm
Forum: HATs and other add-ons
Topic: Ssd1322 oled display
Replies: 7
Views: 243

Ssd1322 oled display

hi, so i have my ssd1322 based oled display id like to connect to my raspberry pi, any idea how would i achive that, on back side of the module is table with resistors R5,6,7 & 8, from that table it appears the display is in 8080 analog mode? Would swapping resistor from R6 to R5 enable 4 wire spi? ...
by joural
Fri Jul 26, 2019 6:32 pm
Forum: For sale
Topic: Power button
Replies: 0
Views: 357

Power button

Hi so few years back i designed this button It is using gpio pins, the header can be shorten to lengh of 2x3 pins which is what it is using, it should be compatible with all raspberry pi versions (but this hasnt been tested) i have about 15boards that can be populated with 1x header, 3x resistor, an...
by joural
Thu Jul 18, 2019 3:58 pm
Forum: HATs and other add-ons
Topic: Raspberry pi zero display
Replies: 4
Views: 371

Re: Raspberry pi zero display

Ill go with 88x28mm I guess thats near enough to "perfect" Be aware that 88x28 is from PDF link for display only, the module is some millimeters longer: https://stamm-wilbrandt.de/en/forum/256x64.oled.png Yep, will be Somehow i couldnt find any of these ssd13XX oled displays, and i thought of mysel...
by joural
Thu Jul 18, 2019 4:17 am
Forum: HATs and other add-ons
Topic: Raspberry pi zero display
Replies: 4
Views: 371

Re: Raspberry pi zero display

Interesting question, I doubt that you will find a perfect fit. Pi0 dimensions are 65mmx30mm, that is a 2.82" diagonal: sqrt(65^2+30^2)/25.4 = 2.82 This is a two dimension overshoot 2.8" display (display alone is 57.6mm×47.2mm): https://www.aliexpress.com/item/33013348233.html This is a nearly perf...
by joural
Wed Jul 17, 2019 8:43 pm
Forum: HATs and other add-ons
Topic: Raspberry pi zero display
Replies: 4
Views: 371

Raspberry pi zero display

hello, does anybody know
If there is led/oled display the size/dimensions of raspberry pi zero that can come on top of it? Connection is any, i found 2.13 inch but thats e-ink, thank you in advance
by joural
Sat Jul 06, 2019 11:15 am
Forum: Troubleshooting
Topic: Raspberry Pi 4 temperature
Replies: 405
Views: 93472

Re: Raspberry Pi 4 temperature

Is this firmware update installed permanently on board or when i change SD card do i have to execute it again? Thank you
by joural
Thu Jul 04, 2019 3:00 am
Forum: Graphics, sound and multimedia
Topic: GIANT UPDATE: Build FFmpeg and mpv – Automatically in 54 Minutes!
Replies: 203
Views: 96297

Re: GIANT UPDATE: Build FFmpeg and mpv – Automatically in 54 Minutes!

Good morning, quick hypothetical question, with release of raspberry pi 4, does this make sense to install on new device? I understand that 4K hardware decoding is not going to be implemented in new linux kernel for some time( 2020/2021). Thank you
by joural
Tue May 07, 2019 8:56 pm
Forum: Python
Topic: Magpi download script
Replies: 0
Views: 151

Magpi download script

I glued together script to download all magpi issues, currently ending with issue 81... Hope someone will find it useful... Wget needs to be installed for this script to work.. import os import sys for i in range(1, 82): #81 = may 2019 + 1 i = "%02d" % (i,) url = "https://www.raspberrypi.org/magpi-i...
by joural
Mon Oct 08, 2018 10:49 am
Forum: Graphics, sound and multimedia
Topic: GIANT UPDATE: Build FFmpeg and mpv – Automatically in 54 Minutes!
Replies: 203
Views: 96297

Re: GIANT UPDATE: Build FFmpeg and mpv – Automatically in 54 Minutes!

okey, first i have to say thank you, Thank you very much for this script and all the hard work you put into constructing it. it helped me big time. I have enquiry as well... i want to use python-mpv, and for it i need libmpv.so my system is refusing to find it and i cannot find anything useful from ...

Go to advanced search