Go to advanced search

by Koda
Mon Aug 27, 2018 11:41 am
Forum: Networking and servers
Topic: Setup PRI as networkbridge
Replies: 1
Views: 429

Re: Setup PRI as networkbridge

I have found this https://rbnrpi.wordpress.com/project-li ... -ready-tv/ to try. After Change the IP from Harddisk to 192.168.2.55, I can call a ping from RPI to harddisk, But not from Smartphone to Harddisk
by Koda
Sun Aug 26, 2018 3:20 pm
Forum: Networking and servers
Topic: Setup PRI as networkbridge
Replies: 1
Views: 429

Setup PRI as networkbridge

I use debian Stretch on my RPI 3B+. I have this Hardware: MiFi Router with 192.168.4.1 and activated DHCP Smartphone with 192.168.4.50 Sometimes, I want to connect a RPI to my MiFi Router. With this tutorial https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md it's no pro...
by Koda
Fri Aug 24, 2018 5:58 pm
Forum: Graphics, sound and multimedia
Topic: HDMI to CSI-2 via TC358743 on RPI3b+ error
Replies: 8
Views: 1020

Re: HDMI to CSI-2 via TC358743 on RPI3b+ error

Sorry for doublepost. I have reinstalled my RPI3B+ and now it works. My Problem: I have open http://192.168.1.54:8080/stream/video.mjpeg in vlc. But the lag is 1.5 - 2.5 seconds. Can i improve it? http://192.168.1.54:8080/stream in browser is a little bit faster, but has a lag too. But the Problem i...
by Koda
Fri Aug 24, 2018 5:51 pm
Forum: Graphics, sound and multimedia
Topic: HDMI to CSI-2 via TC358743 on RPI3b+ error
Replies: 8
Views: 1020

Re: HDMI to CSI-2 via TC358743 on RPI3b+ error

To generate an edid file use something like sudo get-edid | xxd -p > edid.txt get-edid can be installed with the read-edid package I suggest that you test with the 3B first before moving on to the 3B+ set the verbosity=8 in the config file to produce more logging I get this: sudo get-edid | xxd -p ...
by Koda
Fri Aug 24, 2018 5:16 pm
Forum: Graphics, sound and multimedia
Topic: HDMI to CSI-2 via TC358743 on RPI3b+ error
Replies: 8
Views: 1020

Re: HDMI to CSI-2 via TC358743 on RPI3b+ error

Thank you. I will try on a fresh installation. I have create one for 3B and it works. But there my Problem is a timeout. My camera is send signal only all few seconds. So i have allways a server timeout. I have found a option -timeout for uv2l-mjpegstream, but don't find a way to set it with my serv...
by Koda
Fri Aug 24, 2018 3:14 pm
Forum: Graphics, sound and multimedia
Topic: HDMI to CSI-2 via TC358743 on RPI3b+ error
Replies: 8
Views: 1020

Re: HDMI to CSI-2 via TC358743 on RPI3b+ error

Ok. Now I have a special error :) I have insert my sdcard into a RPI3B, and than Back into my RPI3B+. Now I see the resolution of input, But don't see a image or movie: sudo service uv4l_raspicam status ● uv4l_raspicam.service - UV4L Raspicam Loaded: loaded (/etc/systemd/system/uv4l_raspicam.service...
by Koda
Fri Aug 24, 2018 3:09 pm
Forum: Graphics, sound and multimedia
Topic: HDMI to CSI-2 via TC358743 on RPI3b+ error
Replies: 8
Views: 1020

Re: HDMI to CSI-2 via TC358743 on RPI3b+ error

Thank you. Have you an idea how can I make it? When I search for tc358743-edid-file I found any infos on google
by Koda
Fri Aug 24, 2018 2:47 pm
Forum: Graphics, sound and multimedia
Topic: HDMI to CSI-2 via TC358743 on RPI3b+ error
Replies: 8
Views: 1020

HDMI to CSI-2 via TC358743 on RPI3b+ error

I have buy a B101 and have installed on RPI 3B+ I used this tutorial https://www.linux-projects.org/uv4l/installation/ My steps: curl http://www.linux-projects.org/listing/uv4l_repo/lpkey.asc | sudo apt-key add - nano /etc/apt/sources.list and ADD deb http://www.linux-projects.org/listing/uv4l_repo/...
by Koda
Fri Aug 24, 2018 2:34 pm
Forum: Graphics, sound and multimedia
Topic: HDMI to CSI-2 via TC358743 on kernel 4.1
Replies: 584
Views: 180507

Re: HDMI to CSI-2 via TC358743 on kernel 4.1

Thank you The new error is this sudo service uv4l_raspicam status ● uv4l_raspicam.service - UV4L Raspicam Loaded: loaded (/etc/systemd/system/uv4l_raspicam.service; enabled; vendor preset: enabled) Active: active (running) since Fri 2018-08-24 16:31:55 CEST; 49s ago Main PID: 435 (uv4l) CGroup: /sys...
by Koda
Fri Aug 24, 2018 2:16 pm
Forum: Graphics, sound and multimedia
Topic: HDMI to CSI-2 via TC358743 on kernel 4.1
Replies: 584
Views: 180507

Re: HDMI to CSI-2 via TC358743 on kernel 4.1

I have buy a B101 and have installed on RPI 3B+ I used this tutorial https://www.linux-projects.org/uv4l/installation/ My steps: curl http://www.linux-projects.org/listing/uv4l_repo/lpkey.asc | sudo apt-key add - nano /etc/apt/sources.list and ADD deb http://www.linux-projects.org/listing/uv4l_repo/...
by Koda
Tue Aug 21, 2018 5:09 pm
Forum: Graphics, sound and multimedia
Topic: Share Screen from B101 HDMI to CSI-2 Bridge
Replies: 4
Views: 1026

Re: Share Screen from B101 HDMI to CSI-2 Bridge

connect a DSLR Camera with HDMI to the B101 HDMI to CSI-2 Bridge (or other Hardware solutions). After this, I will share (not save) the camera screen (Live View) with a android tablet. Are you sure your camera uses HDMI out to show the LiveView image? Now I'm sure :) What is the best Version? I hav...
by Koda
Sun Aug 19, 2018 7:44 am
Forum: Graphics, sound and multimedia
Topic: Share Screen from B101 HDMI to CSI-2 Bridge
Replies: 4
Views: 1026

Re: Share Screen from B101 HDMI to CSI-2 Bridge

DirkS wrote: Are you sure your camera uses HDMI out to show the LiveView image?
No. I must order a mini HDMI cable to check it. I wan't share not the Live View direct, only the image preview after I shot a image
by Koda
Sat Aug 18, 2018 1:59 pm
Forum: Graphics, sound and multimedia
Topic: Share Screen from B101 HDMI to CSI-2 Bridge
Replies: 4
Views: 1026

Share Screen from B101 HDMI to CSI-2 Bridge

Hi I have a special question today. I search a solution to connect a DSLR Camera with HDMI to the B101 HDMI to CSI-2 Bridge (or other Hardware solutions). After this, I will share (not save) the camera screen (Live View) with a android tablet. Installed is Raspberry Debian Stretch with Access Point ...

Go to advanced search