Go to advanced search

by Wazaam
Thu Oct 04, 2018 9:27 am
Forum: Advanced users
Topic: Trying to read camera inputs from two Raspberry Pi 2B's through a network
Replies: 1
Views: 342

Trying to read camera inputs from two Raspberry Pi 2B's through a network

I'm trying to get the input of 2 Raspberry Pi 2B cameras through a network, in order to get depth perception for a drone. I have tested the depth perception algorithm by taking 2 pictures on the same pi then processing it and it works as expected. However, I need to get 2 images at the same time rat...
by Wazaam
Thu Sep 06, 2018 1:24 am
Forum: Compute Module
Topic: Unable to flash the eMMC on a Compute Module
Replies: 3
Views: 891

Re: Unable to flash the eMMC on a Compute Module

Looks like I found the issue. I've been using the compute module IO board v 1.2 along with the compute module 3. It appears that the compute module IO board v 1.2 only supports compute module 1. I only found that out after receiving the parts from here https://www.raspberrypi.org/documentation/hardw...
by Wazaam
Mon Sep 03, 2018 1:07 am
Forum: Compute Module
Topic: Unable to flash the eMMC on a Compute Module
Replies: 3
Views: 891

Unable to flash the eMMC on a Compute Module

I've been following the instructions from https://www.raspberrypi.org/documentation/hardware/computemodule/cm-emmc-flashing.md to attempt to flash the eMMC onto a Raspberry Pi Compute Module so I can run an OS on it (specifically Ubuntu 16.04). I've tried both the Windows and Linux instructions and ...
by Wazaam
Thu Jul 12, 2018 6:37 am
Forum: Troubleshooting
Topic: Install GUI on existing system?
Replies: 1
Views: 198

Install GUI on existing system?

I've got a Raspberry Pi that holds a certain functionality. It currently doesn't have a GUI to enhance performance as it is not required for general users. However, this makes it quite difficult and tedious to troubleshoot through the command line only. Is it possible to run a command to install a G...
by Wazaam
Fri May 18, 2018 4:40 am
Forum: Troubleshooting
Topic: Can't upgrade SD card from Rasperry Pi 2 to Raspberry Pi 3B+
Replies: 7
Views: 461

Re: Can't upgrade SD card from Rasperry Pi 2 to Raspberry Pi 3B+

It's on version 7 , wheezy.
I've tried connecting it to Ethernet, but was unable to connect to the network to run the upgrade command.

Are there any commands I need to input to connect the Pi to the internet?

Sorry if it sounds basic, it's my first time working with a Raspberry Pi.
by Wazaam
Fri May 18, 2018 3:20 am
Forum: Troubleshooting
Topic: Can't upgrade SD card from Rasperry Pi 2 to Raspberry Pi 3B+
Replies: 7
Views: 461

Can't upgrade SD card from Rasperry Pi 2 to Raspberry Pi 3B+

I was given a Raspberry Pi 2 as part of a university project and one of the things I'm trying to do is upgrade it to a Raspberry Pi 3B+. The code base on the RPi 2 is far too large and requires too much setup to manually port everything over to the 3B+ so I am trying to upgrade the RPi 2 SD card so ...

Go to advanced search