pcmanbob wrote: ↑

Tue Feb 20, 2018 12:59 pm

Have you during any of this tried rebooting your router and the pi ?

turn pi off reboot router give it time to complete its setup and then power pi and see then if it will connect.

if it does not connect, log on to your router and check what wifi security you have set.

Ok! I will test.

@Mary2018: With your 'wpa_supplicant.conf' file open in Notepad++, check the status line at the bottom. Where it says "Windows (CR LF)", right click and select "Unix (LF)" instead. Then re-save your file on the RaspberryPi. Windows and Linux (Unix) store their 'End Of Line' symbols differently in t...

Well it looks OK to me , you could try setting the country code to GB and trying again some people who were having problems connecting found this solved it, I would also recommend rebooting your router just in case the router has locked up in some way with all you attempts to connect. I did everyth...

@Mary2018: With your 'wpa_supplicant.conf' file open in Notepad++, check the status line at the bottom. Where it says "Windows (CR LF)", right click and select "Unix (LF)" instead. Then re-save your file on the RaspberryPi. Windows and Linux (Unix) store their 'End Of Line' symbols differently in t...

Does your network hide its ssid? If so, add a line as follows: ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 country=BR network={ ssid="YVirus" psk="my password here" scan_ssid=1 key_mgmt=WPA-PSK } The other possibility is that you network is not running WPA security? My n...

Well it looks OK to me , you could try setting the country code to GB and trying again some people who were having problems connecting found this solved it, I would also recommend rebooting your router just in case the router has locked up in some way with all you attempts to connect. Ok! I will tr...

Try reading what HawaiianPi wrote. He is telling you that with Jessie you could get away with the short data entry in wpa_supplicant.conf But in STRETCH you you need to use the full/long data entry in your wpa_supplicant.conf So Stretch needs the longer wpa_supplicant.conf, have you used this versi...

Try reading what HawaiianPi wrote. He is telling you that with Jessie you could get away with the short data entry in wpa_supplicant.conf But in STRETCH you you need to use the full/long data entry in your wpa_supplicant.conf So Stretch needs the longer wpa_supplicant.conf, have you used this versi...

How are you attempting the connection, what encryption is your router using, and what trouble are you having (error messages, etc.)? We need details in order to help you. Based on what little information you did supply, I'm guessing your wpa_supplicant.conf file looks like this: network={ ssid="You...

I downloaded the "Raspbian Stretch With Desktop - 11/29/2017". I can not connect the rasp pi3 to my wifi network. With the Jessie version everything worked normally. Any tips? thanks!

I'm very disappointed with all this problem. Please can someone tell me which file I have to change so the wifi can work. I thank you VERY much, because I do not understand anything about networking.