Hi everybody, does anyone succed to have DSI and HDMI simultanely with independent outputs? I've tried my best and follow exactly initial post https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=216399#p1330766 But I can't have both 2 screen working simultanely. I have of course /dev/fb0 and /de...

Hi everybody, in the official documentation, it's written: It is no longer necessary for the first partition to be the FAT partition, as the MSD boot will continue to search for a FAT partition beyond the first one. https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/bootflow.md...

yes,
I've set it though iw, hostapd, and raspi-config with different country codes: US, DE, FR...

Hi, I want to use my pi 3B+ as a 5Ghz wifi acces point in US and Europe. I have to use channel 100 (or 104 or 108 or 112 or 116) to respect frequency regulation. https://en.wikipedia.org/wiki/List_of_WLAN_channels#5_GHz_(802.11a/h/j/n/ac/ax) https://www.radio-electronics.com/info/wireless/wi-fi/8021...

Hi, I made some progress about interfacing imx sensor (224) with Rpi3. I'm pretty sure to correctly set register in mode quadVGA (1280x960 30fps 12bit) with Bayer order GBRG. And give the right image_id=0x2C, data_lanes=2 and native_bit_depth=12 to raspiraw. I put this test pattern picture in front ...

Hi guys!

Does anybody know the maximum output performances DPI can offer?
I would like to output on a display 1024x768@60fps...
Thank you

happy Rpi works!

PierreG wrote: ↑ Thu Dec 07, 2017 2:08 pm Hi everybody! I'm thinking about interfacing another sony imx sensor (224) with Rpi3. What is the requirements to get raw image with raspiraw? 1) Design/use a sensor board 2) Connect i2c/clock/CSI between sensor board and rpi 3) Define the sensor registers a...

Hi everybody! I'm thinking about interfacing another sony imx sensor (224) with Rpi3. What is the requirements to get raw image with raspiraw? 1) Design/use a sensor board 2) Connect i2c/clock/CSI between sensor board and rpi 3) Define the sensor registers and mode in *_modes.h file 4) run raspiraw,...