Go to advanced search

by glennvanderveer
Tue Dec 12, 2017 3:36 pm
Forum: Networking and servers
Topic: Bridging 2 WLANs where one is a Batman Mesh point, and other is a DHCP AP
Replies: 9
Views: 2178

Re: Bridging 2 WLANs where one is a Batman Mesh point, and other is a DHCP AP

No, I have not gotten this to work. It doesn't seem to be possible in the actual network layers...
by glennvanderveer
Mon Nov 20, 2017 7:19 pm
Forum: Networking and servers
Topic: Bridging 2 WLANs where one is a Batman Mesh point, and other is a DHCP AP
Replies: 9
Views: 2178

Re: Bridging 2 WLANs where one is a Batman Mesh point, and other is a DHCP AP

Yuerno wrote:
Sat Nov 18, 2017 5:55 pm
Hi Glenn. I am doing a very similar project to this, and I was wondering if you've been able to get your setup working yet?
No, I cannot get past the bridging of the Mesh to the WLAN. It seems I can have both running, but not talking to each other.
by glennvanderveer
Tue Nov 14, 2017 2:53 pm
Forum: Networking and servers
Topic: How To: Wifi to Ethernet Bridge(Updated for RPi 3)
Replies: 87
Views: 166650

Re: How To: Wifi to Ethernet Bridge(Updated for RPi 3)

Were you successful in setting up the standalone AP on wlan0? The difference is a masquerade. sudo iptables -t nat -A POSTROUTING -o wlx<mac address> -j MASQUERADE You must also separate the wpa_supplicant.conf files. Open /etc/wpa_supplicant/wpa_supplicant.conf with a text editor. Save as /etc/wpa...
by glennvanderveer
Tue Nov 14, 2017 1:48 pm
Forum: Networking and servers
Topic: How To: Wifi to Ethernet Bridge(Updated for RPi 3)
Replies: 87
Views: 166650

Re: How To: Wifi to Ethernet Bridge(Updated for RPi 3)

Hi, is there anything to change in this guide if I want to add a ethernet (eth0) -> wifi (wlan1) -> internet bridge to an access point wifi (wlan0) -> wifi (wlan1) setup made with hostapd? All attempts I have made to bridge a wifi device except a wifi ap to ethernet has failed. I do have a NATed ne...
by glennvanderveer
Tue Nov 07, 2017 5:25 pm
Forum: Networking and servers
Topic: Bridging 2 WLANs where one is a Batman Mesh point, and other is a DHCP AP
Replies: 9
Views: 2178

Re: Bridging 2 WLANs where one is a Batman Mesh point, and other is a DHCP AP

not_aki wrote:
Tue Nov 07, 2017 4:28 pm
Have you tried connecting it to the ethernet as a test? :P
Yes, but ethernet is not part of the problem.
by glennvanderveer
Mon Nov 06, 2017 4:37 pm
Forum: Networking and servers
Topic: Bridging 2 WLANs where one is a Batman Mesh point, and other is a DHCP AP
Replies: 9
Views: 2178

Bridging 2 WLANs where one is a Batman Mesh point, and other is a DHCP AP

Here is a diagram of what I am attempting to accomplish: NetworkDiagram.png I have followed the following links to get the parts working:: https://learn.adafruit.com/setting-up-a-raspberry-pi-as-a-wifi-access-point/overview for the AP and DHCP server for both WLAN0 connections. I did not do the upda...

Go to advanced search