Raspberry Pi Forums

m4rky

Nice one Ronnie. It worked.

"apt-get update" then "apt-get upgrade" then a hard reboot (pulling the power plug from the pi) fixed it. My usb-dac is now listed and selectable in the squeezelite setup.

Thanks.

m4rky

Ronnie: Do you mean try "apt-get update" then "apt-get upgrade" ??

m4rky

Ronnie, I had posted in the slimdevices max2play forum and I think you answered there also. I tried the config.txt change you suggested max_usb_current = 1 and it didn't make any difference. I am going to reinstall the old squeezeplug software as it was working fine until I upgraded to the max2play ...

m4rky

Further info on my USB DAC problem: lsusb shows my DAC, its called "Texas Instruments Japan PCM2902 Audio Codec": root@max2play:~# lsusb Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0424:e...

m4rky

Finally I got around to changing my older squeezeplug r-pi machine over to the new Max2Play/Squeezeplug. I have it working using the headphone jack on the r-pi but I want to use my USB DAC. It's not appearing in the list of soundcards on the advanced options page. How do I get set the output of the ...

m4rky

Cool. I now have MotionEye running on my ubuntu box. But how do I add the MotionPie camera to it? I selected the Remote MotionEye Camera option and added my url of "http://192.168.1.102:80" with the user "admin" and no password. But it says no camera found. So I have to set anyth...

m4rky

Yes, you're better off using a separate machine with motionEye. Soon motionPie for RPi will have a special feature called "Fast Network Camera" that will make use of the GPU to encode the MJPEG stream. I have got one raspberry pi running MotionPie and its working great. However I cannot s...

m4rky

ccrisan wrote:Yes, you're better off using a separate machine with motionEye. Soon motionPie for RPi will have a special feature called "Fast Network Camera" that will make use of the GPU to encode the MJPEG stream.

Cool. How do I install MotionEye ??

m4rky

Hi, I have been trying to use the RpiCam Web Interface for some time and I had it working ok at first but its stopped so I put my three Rpi Cameras into a box. Until now. I have been looking at MotionPie and I am keen to try it out. What I want to be able to do is setup three cameras around the outs...

m4rky

Hi, I am thinking of changing my Squeezeplug 7.5 setup with this new software. However I am unclear as to whether it supports USB DACs? You webpage suggests that I might need to purchase a Max2Play premium license? Or is the license just for I2C DACs? My DAC is the Behringer UCA-202 USB DAC. Thanks

m4rky

Try the post on this page: http://www.raspberrypi.org/forums/viewtopic.php?p=500460#p500460 In that case, you need to edit motion.conf adding the directive: netcam_userpass username:password I am trying to put some security on my camera feed so it's not open to everyone on the internet. I have edit...

m4rky

In that case, you need to edit motion.conf adding the directive: netcam_userpass username:password I am trying to put some security on my camera feed so it's not open to everyone on the internet. I have edited the motion.conf file as above with a username and password but I never get prompted to en...

m4rky

@m4rky Not sure if motion can be set up this way, but an universal approach would be, to use incrond: http://inotify.aiken.cz/?section=incron&page=about&lang=en http://inotify.aiken.cz/?section=incron&page=doc&lang=en In general, you can have your images or video folder monitored fo...

m4rky

Can this interface send an email when the camera detects motion??
I want to set a few of these up around the outside of my house and then record when motion detected.
I would like to also receive some notification when this happens say be email or sms.

Would be cool if it could do this.

m4rky

slabua wrote:
m4rky wrote:How do I get it to save the files to a windows share in the first place rather than the SD card?
You're welcome : )
Maybe have a look at here http://elinux.org/RPi-Cam-Web-Interface ... her_folder

Thats exactly what I was looking for. Thanks for your help

m4rky

slabua wrote:
m4rky wrote:Good idea. But I can only see the boot partition and not the Rasbian partition as it's a windows pc
Try to access the ext partition with http://www.chrysocome.net/explore2fs

Thats brilliant thanks.

How do I get it to save the files to a windows share in the first place rather than the SD card?

m4rky

I am having trouble downloading a video to my windows laptop. The video is pretty big 1.6GB in size! It keeps failing part way through the download. The most I have got is 500mb but it fails at different points. Just a thought, if the video is on the sd card you may want to plug it directly to the ...

m4rky

I am having trouble downloading a video to my windows laptop. The video is pretty big 1.6GB in size! It keeps failing part way through the download. The most I have got is 500mb but it fails at different points. I have also tried using WinSCp to download but that too keeps failing at around 200mb. W...

m4rky

I successfully setup this interface last night and the preview and controls work well. I did have a camera issue at the start but that was because I hadn't pushed the black tab back down the connector far enough. I have recorded a video using the interface and downloaded the file to my Windwos lapto...

m4rky

Gerrelt, Looks like the "sleep" command worked for me. This morning sound came out of the DAC :D I don't understand why the auto-reboot needs to wait but a manual reboot doesn't. When I get chance I will reinstall my PI using Hard Float and see if auto-reboot will work. It may be an issue ...

m4rky

Gerrelt,

I use the cronjob you showed on your instructions:

0 3 * * * sudo shutdown -r now

Thanks

m4rky

Hi, I have setup my r-pi as per your instructions. I am using soft float raspbian rather than hard float though. My problem is that when the r-pi auto reboots over night squeezelite is running as I can control it using iPeng on my iPhone. But I don't get any audio out through my USB-DAC. If I SSH on...

m4rky

I am having similar issues with my 512MB RPi: I am trying to run Squeezeplug software with a USB Audio DAC and an EDIMAX EW-7811UN USB wireless network adapter and an Ethernet cable. Sometimes it does not power on correctly (just the power light comes on), other times the wireless adapter will not c...

m4rky

That would be a bit of a pain for me as the squeezeplug is the last device to be changed (I have done 7 other devices).
Plus I have changed the wireless config on the squeezeplug now so reverting back probably won;t work either.

Thanks anyway

m4rky

I have been using my Squeezeplug wirelessly happily for months but I have recently changed my Wireless router so the SSID and Key have changed. Now I cannot get it to work wirelessly. I have put in a network cable. Then used SSH to access the pi. Ran Setup and gone into the config and changed the wi...

Search found 37 matches

Re: New Complete Web-Based SqueezePlug Version Available

Re: New Complete Web-Based SqueezePlug Version Available

Re: New Complete Web-Based SqueezePlug Version Available

Re: New Complete Web-Based SqueezePlug Version Available

Re: New Complete Web-Based SqueezePlug Version Available

Re: Surveillance camera based on BuildRoot and Motion

Re: Surveillance camera based on BuildRoot and Motion

Re: Surveillance camera based on BuildRoot and Motion

Re: Surveillance camera based on BuildRoot and Motion

Re: New Complete Web-Based SqueezePlug Version Available

Re: RPi Cam Web Interface

Re: RPi Cam Web Interface

Re: RPi Cam Web Interface

Re: RPi Cam Web Interface

Re: RPi Cam Web Interface

Re: RPi Cam Web Interface

Re: RPi Cam Web Interface

Re: RPi Cam Web Interface

Re: RPi Cam Web Interface

Re: [Tutorial] Squeezelite up and running on Raspbian Wheezy

Re: [Tutorial] Squeezelite up and running on Raspbian Wheezy

Re: [Tutorial] Squeezelite up and running on Raspbian Wheezy

Re: Ethernet &USB die randomly; Pi freezes

Re: SqueezePlug Version 6 available

Re: SqueezePlug Version 6 available