Go to advanced search

by Imperf3kt
Mon Jun 24, 2019 8:18 pm
Forum: Advanced users
Topic: Is the new Raspberry PI 4 capable to play 10BIT H264
Replies: 3
Views: 282

Re: Is the new Raspberry PI 4 capable to play 10BIT H264

jamesh wrote:
Mon Jun 24, 2019 9:47 am
No, the H264 decoder is the same.

The H265 HEVC decoder supports 10bit 4k.
I was playing a 10bit h.264 encoded file just 5 minutes ago on my Pi3A+ though...
Is it really unsupported? Seems to work fine in the VLC that comes preinstalled.
by Imperf3kt
Mon Jun 24, 2019 9:08 am
Forum: General discussion
Topic: Raspberry Pi 4 Thread - general discussion
Replies: 256
Views: 10298

Re: Raspberry Pi 4 Thread - general discussion

hi, Will this new(Rpi4) product support Windows 10? If you mean Windows 10 IOT as is available for the Pi3b etc, not until Microsoft updates it to support the new hardware. If you mean Windows 10 desktop for x86 PC's, maybe via emulation but you're on your own in getting it to work. @Jamesh Don't d...
by Imperf3kt
Mon Jun 24, 2019 6:35 am
Forum: General discussion
Topic: Raspberry Pi 4 Thread - general discussion
Replies: 256
Views: 10298

Re: Pi4 Thread - general discussion

Wow, right when I have no money T_T (actually more like right when I just spent all my money)

Will have to see if somebody buys me one in 30 days ;)
by Imperf3kt
Mon Jun 24, 2019 5:47 am
Forum: Troubleshooting
Topic: PI 3B+ WIFI not working on different AP/routers
Replies: 14
Views: 496

Re: PI 3B+ WIFI not working on different AP/routers

I experienced a similar issue over the weekend with my Pi3A+, at least, your symptoms look the same as mine. After two days of reading posts and trying stuff, I found a recommendation to make sure the 5G SSID used a different password to the 2,4G SSID I simply logged into the router as an admin and ...
by Imperf3kt
Mon Jun 24, 2019 4:36 am
Forum: Automation, sensing and robotics
Topic: both motors only moving a tiny bit
Replies: 1
Views: 56

Re: both motors only moving a tiny bit

Have you checked the voltage of the batteries (while in use), they might simply be drained.

8 minutes sounds about right for a small battery pack.
What kind of batteries are you using? How have you wired them, exactly as the guide says, or using different components?
by Imperf3kt
Sun Jun 23, 2019 11:18 pm
Forum: Beginners
Topic: Rbp Zero W Problems with sound
Replies: 5
Views: 133

Re: Rbp Zero W Problems with sound

Oops, I really messed up there. I see it now that you point it out, thanks.
Sorry for that.
by Imperf3kt
Sun Jun 23, 2019 9:34 pm
Forum: Beginners
Topic: Rbp Zero W Problems with sound
Replies: 5
Views: 133

Re: Rbp Zero W Problems with sound

if you are planning to connect your speaker directly thru the headphone jack you better place your ear very near (as in within 20mm). I have two issues with this statement. 1: OP has a Pi 0 W, there is no headphone jack - they're deriving audio via the HDMI port. 2: it simply isn't true on models t...
by Imperf3kt
Sun Jun 23, 2019 8:29 pm
Forum: Beginners
Topic: 4 AA Battery pack for Servo
Replies: 11
Views: 250

Re: 4 AA Battery pack for Servo

Pin #1 is 3v3 and has a square pad.
Are you sure you don't mean pin #2?
by Imperf3kt
Sun Jun 23, 2019 8:10 am
Forum: Troubleshooting
Topic: [solution] WiFi refuses to connect
Replies: 7
Views: 666

Re: WiFi refuses to connect

Thanks for the suggestion, but after tinkering all day, I've narrowed the issue down to the 5g WiFi. If I install a clean Raspbian Stretch (2018-11-13) and then place the uSD card in a Pi3b, it connects to 2.4G WiFi just fine. If I then put the card in the Pi3A+ again and try to connect to 5G, it fa...
by Imperf3kt
Sun Jun 23, 2019 3:43 am
Forum: Troubleshooting
Topic: [solution] WiFi refuses to connect
Replies: 7
Views: 666

Re: WiFi refuses to connect

Slight update on this. After leaving my Pi overnight, I again tried it today. I booted it and suddenly WiFi was working, no questions asked. Confused, I tried my other SD card and it also worked. Then, upon switching back to the original card, the Pi refuses to boot, from either card... But both car...
by Imperf3kt
Sat Jun 22, 2019 8:36 pm
Forum: Troubleshooting
Topic: [solution] WiFi refuses to connect
Replies: 7
Views: 666

Re: WiFi refuses to connect

I still have a 2018-11-13 iso, so I'll give that a go, but I suspect the issue is hardware related.
Not sure how I possibly broke it though, it worked right up until I did an update (because it needed wifi to do the update)

I'm in for the "$25 fix" I suspect
by Imperf3kt
Sat Jun 22, 2019 8:29 am
Forum: Troubleshooting
Topic: [solution] WiFi refuses to connect
Replies: 7
Views: 666

Re: WiFi refuses to connect

With the card in the working RPi run sudo rpi-update . Then swap it back to the 3A+. No luck. The Pi still refuses to connect to the internet. It just reports "wlan0: Not associated" when I hover the wifi icon. I swapped in a known working SD card from November 2018 and wifi still does not work. Co...
by Imperf3kt
Sat Jun 22, 2019 2:21 am
Forum: General discussion
Topic: Battery for Pi Zero with 3G
Replies: 20
Views: 696

Re: Battery for Pi Zero with 3G

Those 3.7v powerbanks have a 5 volt step up regulator inside them, thats how they can run 5v devices (or charge your phone, as they're typically designed to do) Its also where the conversion loss comes in. It might be possible to run a headless Pi 0 directly from a 3.7v li-ion or li-po battery, some...
by Imperf3kt
Sat Jun 22, 2019 1:50 am
Forum: General discussion
Topic: Battery for Pi Zero with 3G
Replies: 20
Views: 696

Re: Battery for Pi Zero with 3G

Ah, so I did.
Thanks for clarifying.
by Imperf3kt
Sat Jun 22, 2019 1:32 am
Forum: General discussion
Topic: Battery for Pi Zero with 3G
Replies: 20
Views: 696

Re: Battery for Pi Zero with 3G

Conversion losses depend on the regulator (either included or supplied by you)

It could be 30%, or it could be as low as 4%

General advise is to allow 20% for conversion losses, meaning your 10000mAh battery with step-up regulator will provide around 8000mAh at 5v
by Imperf3kt
Fri Jun 21, 2019 11:10 pm
Forum: Troubleshooting
Topic: [solution] WiFi refuses to connect
Replies: 7
Views: 666

[solution] WiFi refuses to connect

I've been collecting dust with my Pi3A+ for a few months and updated to the latest stretch version. Previously I had updated as far as about April. Upon updating, I cannot access my wifi at all. The SSIDs all appear, but I cannot connect to any, despite triple checking the password is accurate, neit...
by Imperf3kt
Fri Jun 21, 2019 10:49 pm
Forum: Beginners
Topic: I finally got my Raspberry pi boards to work with my Motorola Lapdock 500
Replies: 4
Views: 215

Re: I finally got my Raspberry pi boards to work with my Motorola Lapdock 500

The ID pin on a micro USB connector is supposed to connect to ground, not +5v.
If you connected it to +5v, you will effectively create a short circuit.
by Imperf3kt
Fri Jun 21, 2019 9:09 pm
Forum: General discussion
Topic: Raspberry Pi 3 B Power Usage
Replies: 3
Views: 156

Re: Raspberry Pi 3 B Power Usage

From the description, I think a Pi Zero W would probably suit this task better for your use. It's smaller, lighter and consumes the least power of any Pi (around 100-150mAh before turning stuff off)
by Imperf3kt
Fri Jun 21, 2019 10:03 am
Forum: Raspbian
Topic: upgrade error
Replies: 3
Views: 349

Re: upgrade error

I got a near idenrical issue from a different mirror not long ago (couple of hours)
Seems to be a file hash mismatch somewhere and the package manager is refusing to fetch the update because of it.
by Imperf3kt
Thu Jun 20, 2019 8:30 am
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: Using a Pi zero with emmc
Replies: 20
Views: 753

Re: Using a Pi zero with emmc

Just an anecdotal remark about emmc longevity. I have owned several devices (including mobile phones, laptops and other devices) that the emmc has surpassed its lifetime in less than 3 years use rendering the entire device inoperable and irreparable. In contrast, I've never had any SD cards reach en...
by Imperf3kt
Thu Jun 20, 2019 8:25 am
Forum: General discussion
Topic: The correct "over_voltage" settings in RPI 2B for (Overclock )
Replies: 11
Views: 296

Re: The correct "over_voltage" settings in RPI 2B for (Overclock )

I would agree with davidcoton, after setting your overclock settings, see if the program you intend to run works as intended, if not, increase the settings and add some cooling, otherwise it's a success and further overclocking isn't necessary/beneficial.
by Imperf3kt
Thu Jun 20, 2019 3:10 am
Forum: Teaching and learning resources
Topic: Scratch 3.0 please fix it NOW
Replies: 36
Views: 1084

Re: Scratch 3.0 please fix it NOW

As I said, your frustration is not hard to understand / see, but making demands gets you nowhere. It would be better to ask what the current situation is and what work is being done, if any, than to assert that a non profit organisation must do something which is only a small part of the many things...
by Imperf3kt
Thu Jun 20, 2019 1:48 am
Forum: Teaching and learning resources
Topic: Scratch 3.0 please fix it NOW
Replies: 36
Views: 1084

Re: Scratch 3.0 please fix it NOW

While I can understand the frustration, making demands for free work never go down well, especially when presented like this.
by Imperf3kt
Wed Jun 19, 2019 8:24 pm
Forum: Troubleshooting
Topic: Under-Voltage warning
Replies: 6
Views: 235

Re: Under-Voltage warning

It's right in the middle of the power regulation circuitry, I think it's a scorch mark.

But the topic title says under voltage warning, however the OP has not mentioned it beyond the topic title.

What symptoms are you seeing that indicate undervoltage?
by Imperf3kt
Tue Jun 18, 2019 10:26 pm
Forum: Troubleshooting
Topic: Pi freezing while installing OS
Replies: 5
Views: 167

Re: Pi freezing while installing OS

NOOBS is somewhat of an oxymoron. It's not well suited for beginners due to the additional setup requirements and more complicated use. In my personal opinion, NOOBS should not be offered as recommended on the downloads page. Try just downloading Raspbian and use etcher to install it on a different ...

Go to advanced search