Hi I have been looking on different sites for information about Raspberry and GPS. The most common is the combo Rpi + Adafruit + serial ports or any other GPS module using the GPIO. But what about GPS USB dongles ? Very little information sparsely all over the net. So I decided to put all that I gat...

I am feeding FA through my RPi3 using dump1090-mutability (by wlan0) and view result in my PC by mutablity's own web server. I connect to pi via ssh from pc using mobaxterm for SSH, so far so good. Now, I wanted to be able to view same in my android tablet without messing the network that is set and...

hi all so it works for me WITHOUT SD card (RPi 3) just the USB stick (old Transcend 16gb) albeit slower than booting from combo SD.--redirect to sda2 (USB). I used WinImage to create SD and USB. 1. created SD card with Jessie light ( 2017-07-05-raspbian-jessie-lite.img ) 2. created USB stick with sa...

thanks, 1. did the change to AMC0 as suggested 2. removed gps from pi 3. re-connected gps to USB HUB 4 run cgps -s and there was NMEA data/fix immediately 5. rebooted pi and gps does not work in lsusb output, only the hub is visible but NOT any peripherals connected to it. so [GPS]----[RPi3-usb] wor...

hi all being a rookie (in linux and pi) need assistance to connect a u-blox lea-5h gps device to my pi via a powered usbhub. gpsd and all installed. (using the rpi 3 to feed flightaware ads-b). it works ok when connected directly to pi. however the core temp is rising to about 60°C and piaware start...

had the same problem
erased the /var/lib/chksshpwd folder and run upgrade again and it worked !
(used sudo and midnight commander (mc) to do it)
HTH