Raspberry Pi Forums

d_older

This appears to be essentially resolved but I'm not sure why. Ran a sudo apt update / sudo apt full-upgrade / sudo rpi-eeprom-update on the 29th of April (Wednesday evening) This was in readiness to have a look at the new boot diagnostics at the weekend. However - without even having physically chan...

d_older

Hi Hermann, Just checked again on the pi4B2 again and cut and pasted the command from the last pi3 run raspivid -cd MJPEG -t 10000 --mode 7 -w 640 -h 480 -fps 120 -a 512 -pts 480_pts.txt -ex off -ss 8000 -o test_vid_480_10_pts.avi and get the same issue (334 frames lost, largest gap 33.185ms). If yo...

d_older

Hi Hermann, Thanks for that - that confirms my suspicion about the different numbers in the analysis . I'll check once again that the commands were identical (swap camera back to 4B2). Either way, I'll confirm that and then see if 6by9 sees this and recommends which repo to log the fault against tom...

d_older

Hi Hermann, Thanks for your reply: Assuming "^<" was a typo for "^>" the results are as follows:- Pi3B+ (1 frame skipped result) creating tstamps.csv 1196 frames were captured at 120fps frame delta time[us] distribution 1 8276 3 8286 1 8288 1 8289 1 8290 2 8291 2 8292 19 8293 65 8294 327 8295 533 82...

d_older

Hi All, I haven't seen this specific Pi4 behaviour issue referenced in the forum before. TL:DR Capturing a 640 x 480 at 120fps MJPEG video with a V2 camera into a tmpfs "ramdisk" loses about 320 to 350 frames in 10 seconds with a pi4B2 but none or 1 with a Pi3+ (A or B) . Has anyone else seen this a...

d_older

Stunning Work!

Dave

d_older

Hi ereus6 Are all the keyboards and mice you tested wireless - I notice what looks like a Logitech Unifying Receiver in a USB3 port. USB3 ports on many devices are known to interfere with 2.4GHz wireless devices. I would try any keyboard / mouse (wireless or wired) in the USB2 ports with nothing con...

d_older

Hi nophead Just checked with a 2 pair/4core cable into a Netgear Prosafe GS105 (unmanaged switch) and it looks OK @100Mbit pi@pi4B:~ $ sudo mii-tool -v eth0 eth0: negotiated 100baseTx-FD flow-control, link ok product info: vendor 18:03:61, model 10 rev 2 basic mode: autonegotiation enabled basic sta...

d_older

Hi Mick, I did this a couple of nights ago on a ZeroW with Buster and got the same/very similar results (for a DS9490 USB controller). After going through the "systemctl enable / start / stop/ disable" options I couldn't find anything obviously wrong. I also couldn't find any solutions by searching....

d_older

Hi Dud, Just tried my UK Pi keyboard (Bus 001 Device 004: ID 04d9:0006 Holtek Semiconductor, Inc. ) on both my Pi4 and Debian i5 machine and a "tap" on the Backspace key works as expected. (Num Lock on or off - just in case it had any effect) The usual cause of "weird" issues is the power supply - I...

d_older

Hi dipayan,

You should not need an additional USB to serial device, looking at the links there is a USB to serial chip (CP2102) built in to the module. I would just connect it with a micro USB lead and check that a ttyUSBn device is created.

Hope this helps,

Dave

d_older

HI dipayan, Looking at https://wiki.52pi.com/index.php/USB-Port-GPS_Module_SKU:EZ-0048 and https://www.robotshop.com/uk/us-gps-l80-39-gps-module-raspberry-pi.html They imply that the module as a whole requires a 5V supply and it is NOT clear that it will work from 3.3V on the Vcc pin. Also it is not...

d_older

Hi gxmark,

It doesn't look like the ground of the battery powered circuit is connected to the Pi's ground. Without this, the pi's input is just floating / acting as an antenna.

Hope this helps

Dave

d_older

Hi echmain, Just for info, when I was in the Cambridge Raspberry Pi shop I noticed they stocked a second type of official power supply in addition to the one shown by HawaiianPi, described as a non-interchange head version. That, obviously, had UK pins and hence had a vertical orientation. Unfortuna...

d_older

Hi seanspotatobusiness ,

The Leafpad text editor uses the ctrl-C ctrl-V method including "over"paste - note however middle button paste could bring things selected outside leafpad.

Dave

d_older

Hi ab1jx, I always use a desktop to view the output remotely - so it is doing all the javascript processing. I might get chance to set up a 3B in place of the zero with everything else the same and see how that affects the stats (although this is probably not the best weekend for trying to compare a...

d_older

Hi ab1jx, Oops :oops: I've just had a look back at my installation notes and I'm NOT using the internal webserver but am using lighttpd on the pi. The dump1090 version I used was git clone https://github.com/tedsluis/dump1090.git as the source and built a deb package from that. the lighttpd modules ...

d_older

Hi ab1jx,

If you ever do find a way of getting a system to cache the map tiles at the viewing end I would be most interested - a truly portable/isolated visual ADSB receiving station

Dave

d_older

Hi ab1jx , I guess running Apache will up the load when active - I must say that I just connect to dump1090_mutability's internal server (after setting openstreetmap as the map tile source- still get google artifacts though!) at ip/dump1090/gmap.html and let my desktop do the heavy lifting. I've not...

d_older

HI abi1jx I wouldn't worry too much about the loading on a Pi-zero - this is mine currently:- top - 16:31:24 up 156 days, 21:18, 1 user, load average: 0.50, 0.54, 0.48 Tasks: 65 total, 1 running, 40 sleeping, 0 stopped, 0 zombie %Cpu(s): 27.7 us, 7.4 sy, 0.0 ni, 63.9 id, 0.0 wa, 0.0 hi, 1.0 si, 0.0 ...

d_older

Hi Bosse_B re. ~$ lftp -e "pwd; bye" sftp:/xxxxxxx.com@ftpcluster.xxx.xx lftp: sftp: Name or service not known Does your username really end with .com? You do need to use the word "put" and a filename and you do need two slashes after "sftp:" e.g. e.g. lftp -e "put filename.ext; bye" sftp://username...

d_older

Hi Bosse_B, If you can't use authorized_keys and you're happy to have your sftp username (but not password) in the history buffer you could use lftp and .netrc create a .netrc ( note the dot) in the user's home directory file with the following contents:- machine ftp.foo.bar login username password ...

d_older

Hi Nebelhom,

The issue with the mounted / not mounted disks is that you tried to u(n)mount /dev/sda not /dev/sda1.

so here I see them

Code: Select all

:~ $ sudo umount /dev/sda
umount: /dev/sda: not mounted

Hope this helps,
Dave

d_older

Hi FairlyLogical,

It's probably the "ro" - read-only- switch in the fstab entry

UUID=4E46A56346A54C80 /disks/Multimedia ntfs-3g defaults,auto,ro,nofail 0 1

Hope this helps,
Dave

d_older

Hi WillBoxOwO,

I've used EasyTag on desktop Debian and it appears to run OK on a Pi3 (run remotely - X forwarding)

sudo apt install easytag libcanberra-gtk3-module

(the libcanberra-gtk3-module to remove nusiance warnings if started from command line/remotely)

Hope this helps,
Dave

Search found 126 matches

[Solved] Re: Dropped frames capturing 120fps MJPEG video with Pi4B

Re: Dropped frames capturing 120fps MJPEG video with Pi4B

Re: Dropped frames capturing 120fps MJPEG video with Pi4B

Re: Dropped frames capturing 120fps MJPEG video with Pi4B

[Solved] Re: Dropped frames capturing 120fps MJPEG video with Pi4B

Re: My new ZX81 clone, built from discrete pin-through hole components

Re: Mouse and keyboard not working on Raspberry Pi 4

Re: RPI4 Ethernet port needs 8 wires?

Re: Failed to start Backend server for 1-wire control

Re: Backspace key on official keyboard not working properly?

Re: Issue with connecting GPS module to raspberry pi 3b+

Re: Issue with connecting GPS module to raspberry pi 3b+

Re: Raspberry Pi 3 to 12V Induction sensor

Re: Is this an official power supply?

Re: Selecting text automatically copies it - how to stop

Re: Making sense of ADS-B checksums & bitfields

Re: Making sense of ADS-B checksums & bitfields

Re: Making sense of ADS-B checksums & bitfields

Re: Making sense of ADS-B checksums & bitfields

Re: Making sense of ADS-B checksums & bitfields

Re: Need to script ftp transfers from RPi to public webserver

Re: Need to script ftp transfers from RPi to public webserver

Re: USB-HDD - NAS-attempt - Device or resource busy

Re: Read and write access to USB hard drive (NTFS)

Re: Change cover of mp3 files