Hello, the datasheet is not very verbose. What I understand is that there is just a 'place data on input and some time later these will show up on output'-pattern. The GO signal is just a beam interrupted'-signal (?). The other signals are not explained (or did I miss something ?). There is an inte...

What I understand from the data sheet is: - the power supply for the device is 24V, so be careful with the connections from/to raspberry in order not to destroy the pi. - the inputs of the device (output for the pi) can be handled with an uln2803 driver. - the outputs of the device (input for the p...

Hello, a quick browse through the net provided some datasheet of E84-modules. Timing most possibly is not a problem, but electrical interfacing could require additional circuitry. Provide (a link to ) the datasheet of the device in order to provide more help. Regards, Gerhard Hello Gerhard, Thanks ...

Hello, My Rpi (rpi 3 model b) is installed with raspbian and ros indigo. I have an E84 connector that performs optical communication. It is connected through a 25 pin connector, which I have interfaced with the RPI through GPIO pins. I have an external power source as I need 24V to drive my E84 modu...