That was it! Thank you very much! :) So to recap, the steps to install a TP-Link Archer T2UH AC600 are the following: 1. Install the driver provided by @MrEngman by entering the following commands in terminal: wget https://dl.dropboxusercontent.com/u/80256631/install-wifi.tar.gz tar xzf install-wifi...

Thank you! It said that the driver was found (mt7610), downloaded and installed, and that I should reboot for it to start working. I can re-do it if the output helps, no problem.

That's very bad news
I have already tried @MrEngman install script, and was very surprised that it didn't work as others managed to make it work. Do you know how can I contact him, please? I really need to make it work. Thanks again for your time.

This is what I got from lsusb and lsmod respectively: Bus 001 Device 006: ID 148f:761a Ralink Technology, Corp. Bus 001 Device 005: ID 045e:078c Microsoft Corp. Bus 001 Device 004: ID 04f3:0212 Elan Microelectronics Corp. Laser Mouse Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9...

I'll try them and keep you posted! Thanks for your help.

I have tried with an external power supply, but it still didn't work. :/

Hi, I have recently bought a TP-Link Archer T2UH AC600 WiFi dongle for my Raspberry-Pi 2B, and it's not working. I have tried to install its driver (mt7610) and make it work, also following various posts in this forum but, this resulted in no success. Also, the Pi freezes frequently when connecting ...

Hi, I have recently bought a TP-Link Archer T2UH AC600 WiFi dongle for my Raspberry-Pi 2B, and it's not working. I have tried to install its driver (mt7610) and make it work, also following various posts in this forum but, this resulted in no success. Also, the Pi freezes frequently when connecting ...

Hi all, I would like to ask whether it's possible to perform a seem-less handover between 2 WiFi dongles connected to the same Raspberry Pi. The dongles are connected to 2 different SSIDs and would like to switch between connections, depending on which one is best. Right now I have to switch off one...

Hi all, I would like to ask whether it's possible to perform a soft handover between 2 WiFi dongles connected to the same Raspberry Pi. The dongles are connected to 2 different SSIDs and would like to switch between connections, depending on which one is best. Right now I have to switch off one, and...