Raspberry Pi Forums

mcscruff

You can take the xbox reciever apart and attach it to a usb cable (the dongle is usb) . But as i still use the xbox case stripped out i kept the dongle in tact and just soldered the wires from the control port to a usb cable

mcscruff

if you like xtreme sports then try redbull tv

mcscruff

i would install a terminal web browser and then accept it that way the only downside is you would need a keyboard

mcscruff

I have compiled the module for xbian 0.6.2 - kernel 3.1.9+

Now i need help getting it working lol

mcscruff

Can't get it to compile on the Pi, just trying to work it out (works fine on my lubuntu laptop tho) [email protected]:~/lirc/drivers/lirc_xbox# make cp ./../lirc_dev/Module*.symvers . cp: cannot stat `./../lirc_dev/Module*.symvers': No such file or directory make: [lirc_xbox.o] Error 1 (ignored) mv Makefil...

mcscruff

unfortunatly i dont use openelec anymore and have deleted the sources. i will try xbian over the next few days and compe for that (it may be worth looking on the xbian foruns for an answer as it may have been done)

mcscruff

Unbenannt.jpg How should I setup a 32GB SD Card? To write data on the card, I prefer to do that with my Windows PC. I don't know if that works, if not, then over Samba. I would also use gparted (as i dont use windows) then move the swap to the end and resize the ext4 to use all the unallocated space

mcscruff

seems to work well. i tested on openelec and will test on raspbian tomorrow

mcscruff

i have already installed it, but it was more of a suggestion as it is a great inclusion for a dedicated media distro

mcscruff

will you be adding lirc to a future build?

mcscruff

i will test your app. This isn't of use to me at the moment but i will test for you

mcscruff

Great work, i have had a little test and it is very smooth. I am not sure if this is a build issue or something broken somewhere but the official android remote doesnt seem to work. I can connect and play movies etc but the actual remote part seems to be broken. I have tested the official app and ya...

mcscruff

I have been using silas's image for over 48 hours now (not his latest experimental) an so far i have not had an issue.

Thank you Silas

mcscruff

As there wasn't one single image available (I hate split zip's ;) ), I decided to create one. It's a 4GB sd-card image, packaged into an 784MB 7zip. It's based on Pisces Image, and updated via apt-get yesterday. The rest is 99% clean pisces+xbmc Instructions: Write it to your sdcard ( http://elinux...

mcscruff

I use sparkys images: http://sparky0815.de/openelec-download- ... fat-files/

mcscruff

the xbox port is actually a usb port (just ignore the yellow wire.
so i chopped a usb cable and joined it.

i tried to get the xbox to power without a motherboard in but i couldn't get it to work so i just bought the ide to usb cable that came with a power source

mcscruff

Well like many people i upgraded from the original xbox as a media centre to raspberry pi. I was using a punnet style case but there were too many wires on show so i used my old case. Here is the cheapest case and media centre poor people could have. xbox case - free ide hdd - free as i already had ...

mcscruff

i tested it on r11412 which i compiled and r11392 which sparky had compiled

mcscruff

torsti76, thanks for the update, although i don't use gentoo normally, i will be following your progress as i think gentoo with xbmc would be ideal

mcscruff

Hi all, I have compiled the module to get the xbox remote and dongle to work on openelec. In the zip there are 3 files (autostart.sh, lircd.conf, lirc_xbox.ko) Put the lirc_xbox.ko in /storage Put autostart.sh and lircd.conf in /storage/.config Ths has only been tested by me but seems to work well, ...

mcscruff

Here is the gui settings from my openelec (.xml not allowed so i have linked it to my dropbox)

http://dl.dropbox.com/u/61746813/guisettings.xml

mcscruff

I am not sure about the power, but i have looked at different ways and have decided on a powered hub (7 ports) as this can run external usb hdd (2.5") . But i am unsure a blu-ray would work as linux is unable to play blu-ray discs

mcscruff

Does anyone know the default ssh user name and password - pi / raspberry dont seem to work

mcscruff

<t> 3. Is the RaspberryPi capable of playing BluRay movies? Not through a linux based distro, at the moment the only way to watch a bluRay film on a linux pc is for it to be ripped to hdd and then played (there is ways to do this on the fly but it still gets ripped) ...

mcscruff

No problem, im going to be using a similar wireless adapter and already have an edimax wifi dongle that works really well

Search found 34 matches

Re: Xbox DVD Playback kit (Xbox DVD remote and dongle)

Re: What XBMC addons you guys use?

Re: Media Center on the Go

Re: Xbox DVD Playback kit (Xbox DVD remote and dongle)

Re: Xbox DVD Playback kit (Xbox DVD remote and dongle)

Re: Xbox DVD Playback kit (Xbox DVD remote and dongle)

Re: XBian - Small, Fast, Lightweight XBMC solution

Re: Android App to shutdown, reboot, ping

Re: XBian - Small, Fast, Lightweight XBMC solution

Re: XBian - Small, Fast, Lightweight XBMC solution

Re: Android App to shutdown, reboot, ping

Re: XBian - Small, Fast, Lightweight XBMC solution

Re: Instructions for building XBMC for Raspbian

Re: Instructions for building XBMC for Raspbian

Re: Latest prebuilt openelec

Re: xbmc.. the original way

xbmc.. the original way

Re: Xbox DVD Playback kit (Xbox DVD remote and dongle)

Re: XBMC on Gentoo - trouble with input devices

Xbox DVD Playback kit (Xbox DVD remote and dongle)

Re: XBMC on Gentoo - trouble with input devices

Re: mini itx psu

Re: OpenELEC meets Raspberry Pi - part 1 (XBMC)

Re: Tiny Home theater PC

Re: Another HTPC idea