Here are some ceramic heat sink`s they use to have an 15x15 but it maybe out of stock. I think an 25x25 is the largest you can fit before you hit board components unless you use a shim to raise the heat sink up a bit. http://stores.ebay.co.uk/PCArena-Bristol?_nkw=Thermasol&submit= A couple of links ...
I usually prefer Samsung and Sandisk but there are a lot of fakes of these memory brands, you can download a fake flash memory tester app, or even an android app that reads the internal details of the card.
I did not use my Pi3 to get my results. I was using an Belkin 2.4amp usb psu adaptor, then i connected my tronsmart usb cable, then i connected an microusb to usb 2.0 adaptor and then i connected an usb power meter to the cable, then i connected a 4 port usb hub and then i connected 2x2amp resistor ...
I have thought about getting one of those switched microusb cables, but i have seen them advertised as 2.0amp and 2.5amp from different seller when they look like the same cable, so i though the 2.5amp was a lie, as i have an Pi3B 2.0amp is a bit low so i decided against buying one.
I like the Tronsmart cable, they seem the best value for money, I bought a 5 pack 1x1ft 3x3ft 1x6ft and they seem well made, I bought a second pack. The Pi3B recommends using an 2.5amp adaptor, I bought a Belkin 2.4amp as i wanted to use my own usb cables, even though under 2.4amp of load, I was get...
Try formatting in other devices like mobile phone, xbox, playstation, an digital camera, canon camera`s have a low level format option. According to an Sandisk microsd card manual, they have an temp and permanent write protection, also when the cards are worn out they become write protected so you d...
It changes the touchpad dpi/speed. The photo`s below are from my second newer keyboard. John. http://i.imgur.com/ABVtngV.jpg http://i.imgur.com/NW71UcH.jpg Smart keys works fine under Windows in my case. That means, everything's OK with the keyboard but problems are related with Linux. BTW what's th...
OK, I have an Pi3B only the wireless keyboard dongles were connected to the usb port one at a time. The top one is my new keyboard, the bottom is my old keyboard. I noticed my new keyboard has a power button in place of a search button on the old keyboard, it does nothing when pressed in Raspbian an...
If you are overclocking your Pi2 cpu check the cpu temp in Kodi while you are playing a video, goto to system/system info/hardware then check the cpu temperature, on the Pi3 if the cpu temp is over 80c the cpu will reduce it`s speed to stay cool, this will give you jerky video it is called throttlin...