I mean that I installed NOOBS on a new card as the main card for the raspi, and did all the configutation needed to make the raspi work as before. (I guess I could also have just reformatted the old one.)

For the record. Configuration of a new main sd card on the raspi, as the source for copying, solved the problem.

Hi, Tried what you described. The closest I came to Format on my Android devices was what they call Erase, I assume that does a quick format of the card. Then used SDFormater on Windows. I get exactly the same error as described above. When preparing partitions, the progres bar makes three "steps", ...

Hi, Thanks! Did that, and the copier stops at 6% when copying the image to a hard disk, so there must be an error on the source card. I am operating the raspi remotely, so it would be better if the SD card copier or some log would have told me that. Is there a way for the raspi to self test the sour...

I have been using the new "SD card copier" command to create backups on a rpi 2b and a rpi 3b, but I have problems on a second 2b. I get an error "Could not create partitions" when the progress bar is at about 60%. Before I started, the 32 GB card that I copied to (which should have more than enough...

I am not 100% sure, but I think I just erased 2 tera bytes from a hard drive using the "SD card copier" in the menu (introduced a couple of months ago). I thought I had carefully selected an SD card from the dropdown as the destination, but unfortunately not. It must have been the hard drive. Someon...