Go to advanced search

by rothlive
Sun Mar 19, 2017 10:45 pm
Forum: Raspbian
Topic: Raspberry Pi Zero usb-modeswitch 2.5 not works
Replies: 1
Views: 716

Raspberry Pi Zero usb-modeswitch 2.5 not works

Hello i have the Problem that with the newest Raspbian a HUAWEI E3531 not works, well her boots on the Card Slot. Then i have update usb-modeswitch with apt-get install from deb http://ftp.debian.org/debian jessie-backports main. http://www.forum-raspberrypi.de/Thread-lte-stick-speedstick-v-e3372-un...
by rothlive
Fri Mar 10, 2017 3:07 am
Forum: Camera board
Topic: Raspberry Zero Camera Image disturbance
Replies: 3
Views: 786

Re: Raspberry Zero Camera Image disturbance

The camera Cable is the Standard from UK.
https://shop.pimoroni.com/products/came ... ro-edition
That.
The Software is picam from http://picam.tgd-consulting.de/de/index.html.
I will check if the raw Option is available.
by rothlive
Wed Mar 08, 2017 1:52 am
Forum: Camera board
Topic: Raspberry Zero Camera Image disturbance
Replies: 3
Views: 786

Re: Raspberry Zero Camera Image disturbance

Update.
I have make the Test with the Old Raspberry Camera v 1.3 5MP and there are no disturbance.
by rothlive
Wed Mar 01, 2017 6:53 pm
Forum: Camera board
Topic: Raspberry Zero Camera Image disturbance
Replies: 3
Views: 786

Raspberry Zero Camera Image disturbance

Hello i have the Problem that the Image from the Raspberry Camera V2 sometimes have disturbances. I use that for time lapse. I let the Raspberry make a Image every 0,5 min. On approximately 10 Images a Day i have the disturbancer. I have change the Hardware (All other Zero other camera other SD Card...
by rothlive
Fri Feb 10, 2017 11:29 pm
Forum: Automation, sensing and robotics
Topic: Servo rotates when I plug in the power supply
Replies: 4
Views: 855

Re: Servo rotates when I plug in the power supply

A other Problem after 5 hours the pi is out.
The light of the pi is out.
Restart and work but that is a big Problem.
by rothlive
Thu Feb 09, 2017 1:38 pm
Forum: Automation, sensing and robotics
Topic: Servo rotates when I plug in the power supply
Replies: 4
Views: 855

Re: Servo rotates when I plug in the power supply

Any other mean that i must deactivate the 270 KΩ pull-up resistor.

270 kΩ pull-up resistor on the board connects the EN pin to reverse-protected VIN. Stand on pololu.com.

Her mean that is like a antenna.

Did anyone understand that ?
by rothlive
Thu Feb 09, 2017 2:04 am
Forum: Automation, sensing and robotics
Topic: Servo rotates when I plug in the power supply
Replies: 4
Views: 855

Servo rotates when I plug in the power supply

Hello I have the Problem that a Servo rotates when I plug in the power supply. On a Zero with a power supply only something. But when I Plug in at a step Down Modul from Pololu D24V22F5 with parallel a capacitor it rotates often complete. And I can only plug out fast the power supply. The gpio for P...
by rothlive
Mon Nov 28, 2016 1:30 pm
Forum: HATs and other add-ons
Topic: Raspberry Zero fastest LAN Adapter
Replies: 7
Views: 2045

Re: Raspberry Zero fastest LAN Adapter

I have SanDisk Ultra Android microSDHC 32GB bis zu 80 MB/Sek, Class 10.
15,8MB/s ; read 57,14MB/s !
USB 3 Kartenleser 19,8MB/s ; read 88,5MB/s
Stand on Amazon.
Is that one of the Limits ?
by rothlive
Mon Nov 28, 2016 2:29 am
Forum: HATs and other add-ons
Topic: Raspberry Zero fastest LAN Adapter
Replies: 7
Views: 2045

Raspberry Zero fastest LAN Adapter

Hello
i search the fastest transmission rate Lan Adapter for the Raspberry Pi Zero.
I read that the USB is faster than over the pins.
But what is the best fastest Adaper for USB Lan.

Is a Wifi Adapter faster ?
by rothlive
Fri Nov 25, 2016 1:47 pm
Forum: Deutsch
Topic: 5V Überspannungsschutz Step-Down Module Rasp. Zero Webcam
Replies: 2
Views: 808

Re: 5V Überspannungsschutz Step-Down Module Rasp. Zero Webca

230 V könnte ich schon aber ungern. Weil wenn dann was an Feuchtigkeit an die 230 V kommt ist gleich das Licht im Haus aus. Ja mit der Temperatur das ist ein Risiko. Aber wie soll man es anders machen. Unter dem Dach das nicht Isoliert ist herschen im Sommer auch sehr hohe Temperaturen. Und Niedrige...
by rothlive
Thu Nov 24, 2016 11:50 am
Forum: Deutsch
Topic: 5V Überspannungsschutz Step-Down Module Rasp. Zero Webcam
Replies: 2
Views: 808

5V Überspannungsschutz Step-Down Module Rasp. Zero Webcam

Hallo ich suche eine Möglichkeit möglichst einfach zb durch eine kleine Platine einen Raspberry Zero der an einen Step down Modul hängen soll vor defekten des Moduls zu schützen. Weil so was laut Web schon mal vorkommt. Ich muss halt etwas Strecke zurücklegen (3m am USB sind zu viel Raspberry Netzte...
by rothlive
Wed Oct 05, 2016 2:13 pm
Forum: General discussion
Topic: raspberry pi Pi Zero comfast realtek 8192cu wifi dissolved
Replies: 3
Views: 601

Re: raspberry pi Pi Zero comfast realtek 8192cu wifi problem

RaTTuS wrote:does the card work naively with the latest raspbian image -
i.e. get a new sdcard - burn the latest on it
run it on your pi2
move it to the pi0
That i have tested. And not work well the Zero need a other Driver then the Pi 2
by rothlive
Wed Oct 05, 2016 2:12 pm
Forum: General discussion
Topic: raspberry pi Pi Zero comfast realtek 8192cu wifi dissolved
Replies: 3
Views: 601

Re: raspberry pi Pi Zero comfast realtek 8192cu wifi problem

I have find a way.
Conect over a USB Hub the mobile phone with the Zero.
Then i habe the conection.
Then i can install the Driver.

That works fine.
by rothlive
Wed Oct 05, 2016 1:11 pm
Forum: General discussion
Topic: raspberry pi Pi Zero comfast realtek 8192cu wifi dissolved
Replies: 3
Views: 601

raspberry pi Pi Zero comfast realtek 8192cu wifi dissolved

Hello i have a Image that works on a Raspberry Pi 2 with the Driver from https://www.raspberrypi.org/forums/viewtopic.php?p=1037490#p1037490 that Post. It runs on the Raspberry Pi 2 but when i use that card in the Zero it not shows the wifi. When i try to install it again i have the Problem i have n...
by rothlive
Wed Sep 14, 2016 3:41 pm
Forum: General discussion
Topic: comfast realtek 8192cu wifi problem
Replies: 2
Views: 1045

Re: comfast realtek 8192cu wifi problem

If you are using raspbian OS then I have drivers compiled for raspbian. I have a script which will automatically find the version of rasbian you use and find the wifi driver your wifi module uses and will download and install it. You can download the script and install it using commands wget https:...
by rothlive
Wed Sep 14, 2016 1:12 pm
Forum: General discussion
Topic: comfast realtek 8192cu wifi problem
Replies: 2
Views: 1045

comfast realtek 8192cu wifi problem

Hello I have a CF-WU855P from Comfast. With a realtek 8192cu. http://en.comfast.com.cn/product/WirelessAdapter/item-155.html Wlan0 is not shown. iwlist scan: lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. dmesg shows : [ 1247.359901] usb 1-1.5: New USB device found, ...
by rothlive
Tue Aug 30, 2016 10:35 pm
Forum: General discussion
Topic: raspberry pi zero extend camera cable
Replies: 4
Views: 1235

Re: raspberry pi zero extend camera cable

Very good. But 9,84£ with shipping costs(Germany) are to much for me.
by rothlive
Tue Aug 30, 2016 7:19 pm
Forum: General discussion
Topic: raspberry pi zero extend camera cable
Replies: 4
Views: 1235

raspberry pi zero extend camera cable

Hello

i have a raspberry pi zero and the camera cable is only 16 cm long.
Gave it a way to make it longer ?
Adapter ?
I have longer camera Cable from the other Raspberry.

Have any one a idea ?
by rothlive
Sat Apr 30, 2016 2:01 am
Forum: Camera board
Topic: New 8MP Camera - Q&A thread
Replies: 450
Views: 197229

Re: New 8MP Camera - Q&A thread

Hello
I have the new V2 Camera but on the Image stand RP_OV5647.
At the jpeg.
I have before the old camera on the pi.

Must i do anything on the Software ?
by rothlive
Sat Apr 30, 2016 1:51 am
Forum: Deutsch
Topic: RaspiCam v2 Problem
Replies: 1
Views: 626

RaspiCam v2 Problem

Hallo
ich habe die neue RaspiCam v2.
Bei Bildern wird aber immer noch RP_OV5647 angezeigt.
Die Bilder sind auch ähnlich groß von der Datengröße.

Was mache ich falsch ?
by rothlive
Tue Apr 05, 2016 12:39 am
Forum: General discussion
Topic: Raspberry Pi 3 5,1 Voltage use or 5 V Standard ?
Replies: 6
Views: 1439

Re: Raspberry Pi 3 5,1 Voltage use or 5 V Standard ?

Ok Thanks. but Micro Center ??
I am come from germany.
by rothlive
Tue Apr 05, 2016 12:38 am
Forum: Deutsch
Topic: Raspberry Pi 3 5,1 Volt Netzteil Vorteil ?
Replies: 2
Views: 1284

Re: Raspberry Pi 3 5,1 Volt Netzteil Vorteil ?

ok vielen dank für die Hilfe. Werde ich mal ein Original Netzteil kaufen. Ich möchte halt aufrüsten habe noch einen Pi 2 der aber ein 2 A Netzteil hat (nicht original). Das Problem ist auch das viele Händler den Pi verkaufen aber kein Original Netzteil sondern die emfehlen halt ein anderes was sie w...
by rothlive
Mon Apr 04, 2016 12:34 pm
Forum: Deutsch
Topic: Raspberry Pi 3 5,1 Volt Netzteil Vorteil ?
Replies: 2
Views: 1284

Raspberry Pi 3 5,1 Volt Netzteil Vorteil ?

Hallo es gibt ja den neuen Raspberry Pi 3 und es wird dafür ein Original Netzteil mit 5,1 Volt angeboten. Gibt es einen Nachteil wenn man ein normales 5 Volt Netzteil verwendet ? Warum ich Frage. Ich überlege ob man ein Original Netzteil überhaupt kaufen sollte weil man es nie an andern Geräten verw...
by rothlive
Mon Apr 04, 2016 12:33 pm
Forum: General discussion
Topic: Raspberry Pi 3 5,1 Voltage use or 5 V Standard ?
Replies: 6
Views: 1439

Raspberry Pi 3 5,1 Voltage use or 5 V Standard ?

Hello
for the Raspberry Pi 3 gave it a Original 5,1 V power supply, is that better then to use a standard 5 V power supply ?
Well when it not is better then i can use a 5 V power supply.

Go to advanced search