Raspberry Pi Forums

NMaas

The plot thickens. It works OK an a 3A+. It works OK with 4.19.115+ #1305 on a Raspberry Pi Zero Rev 1.2. If fails with 5.4.32+ #1308 on that same Zero. I don't know what to try next. Just a dumb thought: What about trying a RPi 1 B 2.0 or RPi 1 B+ I would guess both will show the same behaviour. A...

NMaas

Hello there, pressumeably its a bit too early, but I needed the current obs-studio version @ 25.x level on the RPi 4 ( https://github.com/obsproject/obs-studio/releases ). I found a package already here: http://archive.raspbian.org/raspbian/pool/main/o/obs-studio/ and figured out its only included i...

NMaas

Thank for your answer David :). The problem is that I am really bound here to the single Pi Zero W and its camera - and nothing else. So I think I'll just rewrite the requirement to "as best reliable as possible". As I cannot add another real media and my timeframe is running out, I will probably go...

NMaas

Thank you very much for your answers. I provided that the filesystem for the boot and systemfiles will be readonly, so even on a crash of the system the Pi will always come back up successfully again. I just want to find a way to store files in a way that recording new videos will as close to always...

NMaas

Dear all, I am little bit in a pinch (timewise) and need to create a extremly reliable Actioncam with a PiZero - should come up and record kind of everytime, no matter how bad it was crashed (in terms of power supply switch off at every tinkable point, so thinking about filesystem reliabilty on the ...

NMaas

Nice finding :) I can guess, that v6.3 don't have that same register map as v6.2 so it won't work - while kernel for v6.1-6.3 set all registers even those that don't have 6.2 but have 6.3 ( and opposite). Most probably you're right :)! You'd need to contact directly kedei, but they don't give sh*t ...

NMaas

lzto wrote: 6.1, 6.2 and 6.3 have different init sequence afaik.
I only have version 6.2 in hand so I only did it for 6.2 though I can do the same thing for 6.1 and 6.3.

At the moment I still got the 6.3 display, so I could test it, if there was a way to get the init sequence out of that thing

NMaas

Dear KeDei-haunted fellows, seems like I'd have to join you as well. I needed some 3.5 screens for an project, long story short: Now I got 6 of the KeDei v. 6.3 sitting here doing nothing - because, you know - driver situation. I found following Github repo, which might be interesting for the 6.2 us...

NMaas

OK, long shot: As I do work very often with different microcontrollers, vendors release drop-in replacement chips from time to time. I do not know wheter the BCM2837 was an such replacement with the BCM2835 - but if it was - they could hunk in that chip... However, if it were - it would still be a l...

NMaas

Thanks for your answer Dougie, but I think I asked a little bit mistakable. What I meant was that I need to install several speakers in a room. Each one needs its own mono signal. Therefore I wanted to splitt the stereo interface of the pi in its left signal and right signal - which would give me tw...

NMaas

Hi there, for an Arts Project I would need multiple Mono Soundinterfaces which need to be controled by different sensors, using the Raspberry Pi. Is is possible to split i.e. the RPi Stereo Audio Interface to two "virtual" Mono Audio Interfaces and controlling each of them seperatly? Thanks a lot, N...

NMaas

Hello Hellmut, I have already solved the problem as I have written my own MathLink bridge specific to the used chips (I2C/SPI) in my thesis by using the wiringPi Library. Actually it is quite easy and the guys at Mathematica are working on resolving some dependency issues I came up with :). Regards,...

NMaas

Good evening, I found out about Wolfram beeing able to communicate with i2c Devices - but sadly only on the prebuilt example of an RPi Weatherstation ( http://community.wolfram.com/groups/-/m/t/157486 ). Does anyone know wheter its possible to use Wolfram with custom i2c Devices, like an TMP100 temp...

NMaas

Ok, got that sorted out:
The instructions I used were outdated and I copied the old, non-hard floating point firmware to the pi, which caused the error.
Raspbian is now full hardware fp, so need to use the hardfp/opt/vc from the firmware git to upgrade the old stuff...
And that was it.

NMaas

Thanks for the hint: pi@raspberrypi /opt/vc/lib $ readelf -h ./libmmal.so ELF Header: Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00 Class: ELF32 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: DYN (Shared object file) Machine: [b]ARM[/b]...

NMaas

Maybe try: ldd /opt/vs/lib/libmmal_core.so See if the library is missing any dependencies? I don't think you would usually get the error on this library in that case but maybe... Wow, that got me some really interessting thing: ldd /opt/vc/lib/libmmal_core.so not a dynamic executable -rw-r--r-- 1 r...

NMaas

Here is readout from ldconfig: sudo ldconfig -p | grep mmal libmmal_vc_client.so (libc6) => /opt/vc/lib/libmmal_vc_client.so libmmal_util.so (libc6) => /opt/vc/lib/libmmal_util.so libmmal_core.so (libc6) => /opt/vc/lib/libmmal_core.so libmmal.so (libc6) => /opt/vc/lib/libmmal.so But it still can't u...

NMaas

Thanks for your help Ehren,
the file already existed and was perfectly fine.
I rerun the ldconfig, but sadly nothing changed:

Code: Select all

raspistill: error while loading shared libraries: libmmal_core.so: cannot open shared object file: No such file or directory

NMaas

Hi there, I did recompile the latest kernel 3.6 via arm-linux-gnueabi and the bcmrpi_defconfig - just enabled the Touchscreen driver for eGalax. I did install the kernel correctly, used the latest firmware from the next package (and I also tried the one from the current fw) as well as the libraries ...

NMaas

Ok, the problem is about the RPi Firmware. With version https://github.com/raspberrypi/firmware/commit/ffbb918fd46f1b0b687a474857b370f24f71989d#boot from 06.01.2013 it does work (Serial Line and everything!) with the Version from 07.01.2013 https://github.com/raspberrypi/firmware/tree/0ac68cce44d455...

NMaas

I did also use the https://launchpad.net/gcc-arm-embedded Toolchain, build the Demo and got serial output as well as the blinking led, but I can't transmit any serial signal... Nothing works. Neither with an USB/TTL Converter, nor with an old serial console from a phone. I tried it on serial RaspPi ...

NMaas

Little update: OpenWRT is not completly ready, but at http://code.google.com/p/raspberrypi-openwrt/ it is already working fantastic. Latest infos are given in the newsgroup here: https://groups.google.com/forum/?fromgroups#!topic/raspberrypi-openwrt-dev/_coV7dYZo04%5B1-25%5D OpenWRT is working there...

NMaas

There seems to be some new patches, version 5:
http://article.gmane.org/gmane.comp.emb ... i+patch+v5

Any new build maybe for us?

Thank you very much!

NMaas

ok i tested a little bit further, it does boot up, but keeps on showing these errors - so ain't completly right. and dns / nslookup seems to be malfunctioning / not getting configured correctly from dhcp. other than that, it does already look great! and opkg does try to go to downloads.openwrt.org/s...

NMaas

Sadly I can't boot the card:
mmcblk0 error -110 sending stop command, orginal cmd response 0x900, card status 0x900
mmc0 final write to SD card still running
I tried it with no name as well as Samsung Cards

Search found 29 matches

Re: Moving Linux Kernel to 5.4

OBS Studio on Raspbian Testings / Bullseye segfaulting with possibly in-compiled x64 cef framework in the armhf package

Re: Creating an extremly reliable Actioncam with a PiZero

Re: Creating an extremly reliable Actioncam with a PiZero

Creating an extremly reliable Actioncam with a PiZero

Re: KeDei 3.5 inch 480x320 TFT lcd from ali

Re: KeDei 3.5 inch 480x320 TFT lcd from ali

Re: KeDei 3.5 inch 480x320 TFT lcd from ali

Re: PiZero Roadmap

Re: Stereo Audio Output split to two Mono Outputs?

Stereo Audio Output split to two Mono Outputs?

Re: Wolfram and custom i2c Device

Wolfram and custom i2c Device

[FIXED] Re: libmmal_core.so: cannot open shared object file

Re: libmmal_core.so: cannot open shared object file

Re: libmmal_core.so: cannot open shared object file

Re: libmmal_core.so: cannot open shared object file

Re: libmmal_core.so: cannot open shared object file

[FIXED] libmmal_core.so: cannot open shared object file

Re: ChibiOS/RT Port

Re: ChibiOS/RT Port

Re: OpenWRT

Re: OpenWRT

Re: OpenWRT

Re: OpenWRT