Raspberry Pi Forums

magarto

(((
So bad, man. I recommend you installing xfce4 desktop.
LXDE-pi (aka PIXEL) is very very buggie.

magarto

Thanks for all.
I have installed xfce4 and replaces lxde.
In a near future I will do a clean install, I have listed all systemctl services and Deb packages installed for that porpoise.

magarto

Yes, I know, but I use it as server and I compiled a lot of software and have a huge numbers of programs and configurations and I want to avoid it.
Sdcard is not corrupted because I don't use sdcard.

magarto

alright try running in terminal-> env SUDO_ASKPASS=/usr/lib/pipanel/pwdpip.sh pipanel I can see the lxpanel menu but when I try to change anything it shows: xrandr: Failed to get size of gamma for output default but nothing happens And when I try to restore defaults for large screens it shows: grep...

magarto

press ctrl+alt+t should bring up the terminal, in terminal run lxpanel if it comes up, go menu-> preferences-> appearance settings, on the default tab select an option now press ctrl+alt+delete & reboot that should set everything back to stock Thanks, it shows ..../panels/* files not found Segm...

magarto

Hi, I updated some time ago to last Raspbian version and now LXPanel is not being displayed in PIXEL desktop. I tried to purge and reinstalling package (lxpanel and lxde) but it doesn't work locally or with vnc. I restored config file for LXPanel-PI: .config/lxpanel/LXDE-pi/panels/left # lxpanel <pr...

magarto

Yes, according to the brochure, it is capable of 802.11n.

magarto

Hi, I'm trying to use a Raspberry Pi Zero W as an AP using hostapd. I can use an external wifi adapter in 802.11n mode but I cannot find the right config to start hostapd service in the internal wifi module. Using the external adapter and compiling hostapd, the line "ht_capab=[SHORT-GI-40][HT40...

magarto

Hi, I have installed a clean image of Raspbian Buster in a Raspberry Pi 3 to use as a repeater. Internal wifi adapter (wlan0) and a external wifi RTL8191SU adapter (wlan1) work perfectly. I want to disable internal wifi adapter to connect to the router with a RTL8191SU usb adapter. It is detected bu...

magarto

The some extreme hacking with /opt/vc/lib EGL & GLESv2 libraries (which aren't in Buster) to get over the segfaults in Kodi.

Could you please share what you did. Thanks!

magarto

Ok thanks. I'll wait for a fix.

magarto

I have checked with a clean install that kodi still gives the same error:

Code: Select all

ERROR: Unable to create GUI. Exiting

magarto

Hi! I upgraded Raspbian to Buster but now I cannot launch kodi In the past, I followed this guide to run raspbian with console only (not lightdm) and I had a rule in rc.local to execute kodi as pi user (su pi -c kodi). Now I have a lot of errors executing kodi: Cannot connect to server socket err = ...

magarto

One of the new features in Debian Buster was Apparmor. Since some years ago, we had it in repositories but now it is enabled by default. Since I had my first Raspberry I compile kernels by myself to include apparmor support (a lot of us use Raspberry as a small home server and SELinux, Apparmor or g...

magarto

Even I didn't realize that I was on Jessie. I could upgrade from raspbian jessie to raspbian buster but I had a lot of errors (nothing I couldn't solve by runing the "apt dist-upgrade" command several times and solving errors with "dpkg -P package-with-error") I still have to fix...

magarto

Hi,

If I update Raspbian to last version 10 and I compile kernel, could I change my Raspberry Pi 3 to a Pi 4?
I'm about to receive it and I have a lot of software and configurations in Raspbian to clean install it.

Thanks in advance.

magarto

Thnaks for your replies. I tested both things: cloning the device and that the kernels I compiled where both 4.19 and now I compiled again 4.14 Now boot with SD and USB works with the new kernel but not without a SD card (with my USB pendrive) What I did was: - Checked that last raspbian image inclu...

magarto

So, for you, stop updating is the only solution? Then something isn't working correctly in Raspbian if things like this happen.

magarto

magarto

Using /dev/sda to specify the boot drive is a bad idea. If you have more than one USB drive connected there is no guarantee the boot drive will be assigned the sda device. Using PARTUUID is the recommended (and more foolproof) way. You can find PARTUUID with this command. ls -l /dev/disk/by-partuui...

magarto

Hi! I have a home server using a Raspberry Pi 3 with Raspbian Jessie and a custom kernel 4.5 My / partition and /home are in a usb pendrive. I can boot it from sd changing the /boot/cmdline.txt I am trying to compile a new kernel (4.15) but I cannot boot it and I'm stuck to the 4.5 kernel. After som...

magarto

Hi, I have still a raspberry with Raspbian Jessie and an old kernel compiled with apparmor support. My question is, if I upgrade to the official linux kernel adapted for raspbian (using rpi-update command), will it now be compatible with apparmor? In the past the only way to have apparmor was adding...

magarto

Hi! My OS is raspbian 9 stretch. I don't want to use the systemd dhcpcd.service because I need to stop it to listen at a port (68) from everywhere (0.0.0.0). I need to configure a static ip for wlan0 and eth0 but wlan0 use wpa-supplicant. Is there anyway to fix it? I was able to do that using eth0 b...

magarto

Setting a partitition as bootable (MBR) is a BIOS thing, the RPi doesn't have a BIOS, so it's 100% irrelevant. You MUST layout the partitions as documented here: https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/msd.md the GPU ROM can only boot from the first primary FAT16/FA...

magarto

Hi, After following the "boot RPi3 from USB" I cannot boot from USB if /boot partition is not /dev/sda1 . In my case I had 2 primary partitions: Partition 1 (ext4) / /dev/sda1 Partition 2 (luks) /home /dev/sda2 I splitted partition 1 in two primary partitions: /boot and / . So now I have: ...

Search found 38 matches

Re: LXPanel not displayed anymore

Re: LXPanel not displayed anymore

Re: LXPanel not displayed anymore

Re: LXPanel not displayed anymore

Re: LXPanel not displayed anymore

LXPanel not displayed anymore

Re: Pi Zero W AP mode using 802.11n mode in hostapd

Pi Zero W AP mode using 802.11n mode in hostapd

[Solved] Ralink RTL8191SU error in Buster

Re: Cannot load Kodi in Buster

Re: Cannot load Kodi in Buster

Re: Cannot load Kodi in Buster

Cannot load Kodi in Buster

Where is apparmor by default?

Re: Update Raspbian and Raspberry

Update Raspbian and Raspberry

Re: Cannot boot from USB without SD card

Re: Cannot boot from USB without SD card

Re: Cannot boot from USB without SD card

Re: Cannot boot from USB without SD card

Cannot boot from USB without SD card

Apparmor on Rasbian Jessie

Disable dhcpcd service and setting wlan0 static

Re: Booting from USB error

Booting from USB error