Go to advanced search

by stefan9717
Sun Feb 02, 2020 10:15 am
Forum: Advanced users
Topic: VL805 firmware release 0137ad - fixes for Isochronous streams
Replies: 82
Views: 15664

Re: VL805 firmware release 0137ad - fixes for Isochronous streams

I tested the 2 hour-recording with a pi3b+ and a local disk. The Image is the stream cleaning result of ts-doctor, there are no errors. Zwischenablage01-1.jpg and here is the result of the stream cleaning of the pi4b recording (please excuse the bad quality) Zwischenablage01.jpg I think the dvb-c si...
by stefan9717
Sun Feb 02, 2020 7:05 am
Forum: Troubleshooting
Topic: [Solved] Raspberry Pi 4 Ethernet Problem
Replies: 20
Views: 16380

Re: Raspberry Pi 4 Ethernet Problem

same Problem here, but with different hardware: switch is a hp1810G-24, the first rpi is a pi4b with 4gb ram. It all works ok with a 1 gbit connection. Yesterday I added a second pi, a pi3b+, that has usb tv dongle (hauppauge wintv dual hd), and that is connected to the cable-installation in the hou...
by stefan9717
Fri Jan 31, 2020 7:39 am
Forum: Advanced users
Topic: VL805 firmware release 0137ad - fixes for Isochronous streams
Replies: 82
Views: 15664

Re: VL805 firmware release 0137ad - fixes for Isochronous streams

Hello, Thanks a lot for 0137ad - that makes my tvheadend / hauppauge dual tuner dvb-c setup usable again. (additional info: the dvb stream is written to a nas via cabled network). Although there are still errors. I recorded a 2 hour film yesterday, and this was in the logs: WARNING: Kernel Errors Pr...
by stefan9717
Sun Dec 22, 2019 9:16 pm
Forum: Troubleshooting
Topic: Haupauge DualHD (em28xx) driver broken. Kernel spam "write to i2c device at 0xcX failed with unknown error" on RPi4
Replies: 19
Views: 2473

Re: Haupauge DualHD (em28xx) driver broken. Kernel spam "write to i2c device at 0xcX failed with unknown error" on RPi4

Hi, I have the same errors here on pi4b with raspbian buster, kernel 4.19.88, hauppauge wintv dual hd, and tvheadend. The tv stream is there, but not fluent. When I ran the same software on a pi3b+, it worked fine. Strange thing is, when the tv adapter is plugged in, network transfers slow down sign...
by stefan9717
Tue Sep 24, 2019 9:12 pm
Forum: Raspberry Pi OS
Topic: Tvheadend for Raspbian Buster?
Replies: 25
Views: 12453

Re: Tvheadend for Raspbian Buster?

our topfield receiver was just broken, I decided to buy a dvb-c usb stick and replace the receiver with our pi and a nas. unluckily i have already upgraded to buster... Does the solution with the unstable packages work ? or should i wait when until the stable packages will be available? Thank you, S...
by stefan9717
Tue Dec 18, 2018 10:27 pm
Forum: Networking and servers
Topic: php 7.0 end of life - when will a newer version be available in raspbian?
Replies: 8
Views: 2930

php 7.0 end of life - when will a newer version be available in raspbian?

A nextcloud installation gives me a hint that i should move to a newer version of php, because 7.0 would be end of life, here https://secure.php.net/supported-versions.php you can see php 7.0 is not an actually supported version, no security fixes anymore. I would greatly prefer to upgrade via apt-g...
by stefan9717
Thu Dec 06, 2018 9:08 pm
Forum: Raspberry Pi OS
Topic: "Cannot open access to console. The root account is locked see sulogin(8) man page for more details."
Replies: 24
Views: 45038

Re: "Cannot open access to console. The root account is locked see sulogin(8) man page for more details."

Hello,

I had the same fault when migrating from a pi2b with boot from sd-card but root fs on an ssd to a pi3b+.
what helped was to alter /etc/fstab, then everythink worked fine for me.
by stefan9717
Fri May 11, 2018 8:51 pm
Forum: Advanced users
Topic: Pi3b+ Ethernet driver
Replies: 8
Views: 4511

Re: Pi3b+ Ethernet driver

in between, it worked. then i tried to alter the ip adress. no idea why, but it does not work again now with the pi3b+. works fine with pi2b. It works now - don't know why i thought it's not ok. i updated with rpi-update to the latest yesterday - 4.14.39-v7+. At first, the pi did not show up in the ...
by stefan9717
Fri May 11, 2018 6:57 am
Forum: Advanced users
Topic: Pi3b+ Ethernet driver
Replies: 8
Views: 4511

Re: Pi3b+ Ethernet driver

Hello,
i have the same problem. my old image is working, only the ethernet connection not.

Stefan
by stefan9717
Sat Sep 16, 2017 4:29 pm
Forum: Deutsch
Topic: Zeit/Datum synchronisiert sich nicht mehr
Replies: 4
Views: 7382

Re: Zeit/Datum synchronisiert sich nicht mehr

Hallo, mein pi hat sich mal ähnlich verhalten, zum einen war die Zeit falsch, aber auch andere Dinge waren nach dem Booten auf einem "älteren Stand". es hat sich dann schnell rausgestellt, dass zwar noch von der sd-karte gelesen, aber nicht mehr geschrieben werden konnte. Ich hatte z.b. für einen ja...
by stefan9717
Sun Feb 05, 2017 5:57 pm
Forum: Networking and servers
Topic: ejabberd update?
Replies: 3
Views: 1776

Re: ejabberd update?

Hello, I'm a normal user, so I don't follow every detail of development, but in general I think it's good to have new versions. Concerning ejabberd, the changes with MUC/Sub in 16/08 seem to be quite interesting. I tried to alter the repos, but it didn't work, it seems that erlang has to be updated ...
by stefan9717
Sun Feb 05, 2017 1:07 pm
Forum: Networking and servers
Topic: ejabberd update?
Replies: 3
Views: 1776

ejabberd update?

Hello,
ejabberd 14.07 comes with raspbian (was installed with apt-get), but is quite old. How can I update ejabberd to e.g. 17.01, the actual version?

thank you
by stefan9717
Thu Nov 19, 2015 11:43 am
Forum: Troubleshooting
Topic: Boot failure after backup with usb image tool
Replies: 5
Views: 1243

Re: Boot failure after backup with usb image tool

Update: In the meanwhile, I ordered an identical sd card and wrote the backup image. Luckily, the backup was really ok, so the pi works again now. I can't find the old sd card at the moment (too small...), but I would like to test it if it is ok (fsck says its clean, I can mount it and work with it)...
by stefan9717
Mon Nov 16, 2015 11:33 am
Forum: Troubleshooting
Topic: Boot failure after backup with usb image tool
Replies: 5
Views: 1243

Boot failure after backup with usb image tool

Hello, I run my pi2b with raspbian, I tried to backup my sd card with "usb image tool" on a windows pc. The backup completed successfully, but my pi doesn't boot anymore. It stops at the message "nonblocking pool is initialized". I checked the sd card on a linux pc with fsck, it says both partitions...

Go to advanced search