Raspberry Pi Forums

Jasimo

Sorry to post in this thread, but maybe someone can help me. I´am using a "TP-Link WL-USB Archer T4U" with the RTL8812 chipset on my Raspberry Pi2. I installed it with the Script from MrEngman described in this thread and got success. My wifi is using the same SSID for 2,4Ghz and 5 Ghz, is...

Jasimo

Hi all, Today i change the locales on one of my pikrellcam raspi´s to "de_DE.UTF-8" After a reboot of the pi the annotation string has changed to a german style (24hours), fine. But after a manual stop/start of pikrellcam via the GUI the annotation string switched back to the old style (1...

Jasimo

Hi all, Today i change the locales on one of my pikrellcam raspi´s to "de_DE.UTF-8" After a reboot of the pi the annotation string has changed to a german style (24hours), fine. But after a manual stop/start of pikrellcam via the GUI the annotation string switched back to the old style (12...

Jasimo

Hi, Any one who has successfully done this? 1. mount a remote SMB and NFS share to pi 2. use that Mount as /pikrellcam/media (with all stills, videos, etc subfolder) 3. we still can use web interface to check the videios, thumnails, stills. same as on SD card. Please help share your configurations ...

Jasimo

in the folder
/home/pi/.pikrellcam

Jasimo

halt = shutdown?

rgs
Jan

Jasimo

Wow, cool new feature well done.
Is it planned to show the data of the csv file direcly in the recorded movie, something like an overlay? If i look in the csv, for me it is not possible to determine where in the picture the detection really was.

Jasimo

Hi, playing around with PiKrellcam for a while now and I must say a great piece of code. One thing about the motion detection. Is there a way that I can see (after the recording is done) where the motion detection exactly was in the picture and which threshold of vector_magnitute and vector_count is...

Jasimo

Hi, Yesterday I changed to mjpeg_width 800 mjpeg_quality 12 motion_area_min_side 80 and I got several false positives during the night (outside camera), but i cannot locate why. My question is if i lower the mjpeg quality is this influencing something of the motion detection? Is pikrellcam using the...

Jasimo

Using the -tmp parameter of mp4box pointing to a different directory does the trick. My /tmp is in Ram (tmpfs) and 70MB in size and therefore to small. I now changed the parameter RAMTMP from yes to no in /etc/default/tmpfs so that the Pi is not using /tmp in RAM anymore. But it would be fine (if it...

Jasimo

Hi Bill here is the result, no space left on device ?????? MP4Box -fps 24 -add /mnt/cam/media/videos/motion_2015-09-13_10.50.30_81.mp4.h264 /mnt/cam/media/videos/motion_2015-09-13_10.50.30_81.mp4 AVC-H264 import - frame size 1296 x 972 at 24.000 FPS Error writing data (No space left on device): 1 bl...

Jasimo

Yesterday it was the first time I got problems with pikrellcam, before it was running for over one month rock stable. Today I checked the thumbs page and found a movie with 0 MB, clicking on the thumb results in a "page cannot be displayed" browser message. Here are the log from the record...

Jasimo

One question, is 1296x972 the highest resolution for full Field of View, or is more possible? I tried 1944x1458 in the config file but it falls back to 1080p. Yes, 1296 x 972 is the maximum if you want the full field of view. To get that you have to read out the full 5 Mpix (2592 x 1944) sensor, bu...

Jasimo

means dimming is not possible?

Jasimo

Is there also a way to dim the LED of the Camera Module (gpio32), maybe with pwm?

Jasimo

One question, is 1296x972 the highest resolution for full Field of View, or is more possible?
I tried 1944x1458 in the config file but it falls back to 1080p.

Jasimo

Thx for the information.

Jasimo

Hi,

is it possible to switch off or dimm the red power Led of the Pi2 via Software (Raspbian)
rgs
Jan

Jasimo

thx for the info

Jasimo

Hi, Since I am on Windows 10 with my notebook I got the following flooding my syslog when I am connected via ssh to the PI2 (latest firmware and raspbian wheezy) avahi-daemon[2429]: Invalid response packet from host 192.168.2.124. 192.168.2.124 is the ip of my Windows 10 Notebook. Can someone help m...

Jasimo

Means that there is no way to configure something like a fallback, i read something about that in the man pages (fallback profile).
But you will be right, thx for the info.

Jasimo

Thx for this tip about the static configuration in dhcpcd.conf.
One question, what will happen if a configured IP in the dhcpcd.conf file is already in use by another device in the network, will then a free ip assigned to the Pi?

Jasimo

I just enabled the parameter annotate_show_motion in the conf file, but the video only shows me
Motion ( 0, 0) Integrated Offset ( 0, 0)
and nothing more during the video playback.
rgs
Jan

Jasimo

thx for the help and description.
rgs
Jan

Jasimo

Hi, Just a question regarding the motion detection. Does the size of the motion region I have set, anything to do with the parameter motion_magnitude_limit_count in the conf file? I am asking because the description of this parameter says "Maximum should be something less than what fits in the ...

Search found 51 matches

Re: Edimax EW7811UAC (RTL8812) - 802.11ac AP mode

Re: PiKrellCam: motion vector detect + OSD web interface

Re: PiKrellCam: motion vector detect + OSD web interface

Re: PiKrellCam: motion vector detect + OSD web interface

Re: PiKrellCam: motion vector detect + OSD web interface

Re: PiKrellCam: motion vector detect + OSD web interface

Re: PiKrellCam: motion vector detect + OSD web interface

Re: PiKrellCam: motion vector detect + OSD web interface

Re: PiKrellCam: motion vector detect + OSD web interface

Re: PiKrellCam: motion vector detect + OSD web interface

Re: PiKrellCam: motion vector detect + OSD web interface

Re: PiKrellCam: motion vector detect + OSD web interface

Re: PiKrellCam: motion vector detect + OSD web interface

Re: Control Camera LED on B+

Re: Control Camera LED on B+

Re: PiKrellCam: motion vector detect + OSD web interface

Re: RPI2: Switch off red pwr led

RPI2: Switch off red pwr led

Re: Invalid response packet from host

Invalid response packet from host

Re: Single static IP address for eth0

Re: Single static IP address for eth0

Re: PiKrellCam: motion vector detect + OSD web interface

Re: PiKrellCam: motion vector detect + OSD web interface

Re: PiKrellCam: motion vector detect + OSD web interface