Go to advanced search

by Navaneeth
Wed Apr 22, 2015 8:48 am
Forum: Troubleshooting
Topic: raspberry pi raspbian easycap dc 60 mplayer capture problems
Replies: 9
Views: 8307

Re: raspberry pi raspbian easycap dc 60 mplayer capture prob

Currently i have raspberry pi 2 with raspbian wheezy image and easycap stk1160, Is there any installation guide for easycap setup in pi 2 or pi.
by Navaneeth
Thu Apr 16, 2015 5:33 am
Forum: Raspbian
Topic: Kweb Suite (Minimal Kiosk Browser, omxplayerGUI)
Replies: 1545
Views: 674260

Re: Minimal Kiosk Browser

Is there any issue in loading HD images in kweb? I am using pi 2 and i installed kweb using above instruction. When i enter following command kweb filename.jpg The image loads part by part. board : Rapberry pi 2 tested image dimesions : 1080p(HD) and 720p(HD) terminal command used : kweb file:///hom...
by Navaneeth
Wed Apr 15, 2015 9:56 am
Forum: Raspbian
Topic: Epiphany leaks memory
Replies: 3
Views: 1151

Re: Epiphany leaks memory

There is one more problem , If you are loading HD image(local file)files 720p ,1080p by running following command epiphany-browser fileanme.jpg Then browser will load image part by part (tested in pi 2). So i inserted max_cpu=1 parameter in /boot/cmdline.txt after which the rendering is some what OK...
by Navaneeth
Mon Apr 13, 2015 11:06 am
Forum: Troubleshooting
Topic: Raspberry PI Model B sudo apt-get update
Replies: 15
Views: 1713

Re: Raspberry PI Model B sudo apt-get update

Check /etc/apt/source.list file. If no entry present just paste below line and then run update.

Code: Select all

deb http://mirrordirector.raspbian.org/raspbian/ wheezy main contrib non-free rpi
by Navaneeth
Mon Apr 13, 2015 10:57 am
Forum: C/C++
Topic: GLib-GObject-WARNING
Replies: 6
Views: 8171

Re: GLib-GObject-WARNING

How to switch uzbl to older version? any guide or post would be helpful.

I'm using uzbl browser to show images and it works fine in pi but, when i run my project in pi 2 the image rendering is very slow. Is there any solution to this problem?
by Navaneeth
Mon Mar 16, 2015 9:14 am
Forum: Media centres
Topic: 1080p streaming with youtube-dl through omxplayer?
Replies: 27
Views: 12992

Re: 1080p streaming with youtube-dl through omxplayer?

I am trying to create a simple media centre setup that does nothing more than stream iPlayer, YouTube and play local files. I thought this would be simple enough, with a combination of get_iplayer, youtube-dl and omxplayer, however I am running into some small issues with the youtube part of it. Lo...
by Navaneeth
Mon Mar 09, 2015 9:52 am
Forum: Networking and servers
Topic: ethernet and wifi priority
Replies: 2
Views: 1666

Re: ethernet and wifi priority

DougieLawson wrote:It's not the Raspberry, it's the operating system your Raspberry is running.
Look at the configuration of ifplugd. Or simply un-install that program.
Thank you
by Navaneeth
Fri Mar 06, 2015 6:12 am
Forum: General discussion
Topic: wifi AP with wireless internet.
Replies: 2
Views: 387

Re: wifi AP with wireless internet.

thank you DougieLawson
by Navaneeth
Fri Mar 06, 2015 6:00 am
Forum: Media centres
Topic: OMXPLAYER keyboard control (fullscreen)
Replies: 4
Views: 8183

Re: OMXPLAYER keyboard control (fullscreen)

Can you please Run the video with 'sudo omxplayer filename.mp4' command and tell me whether it works or not?
by Navaneeth
Fri Mar 06, 2015 5:55 am
Forum: Networking and servers
Topic: ethernet and wifi priority
Replies: 2
Views: 1666

ethernet and wifi priority

Currently Pi check wire network first(on boot) then it goes for wifi network check(even though ethernet is disconnected wifi dongle attached) , Is there any way to change the priority between wifi and ethernet?
by Navaneeth
Thu Feb 05, 2015 11:00 am
Forum: General discussion
Topic: Opening Epiphany-Browser in Fullscreen for Kiosk
Replies: 4
Views: 20494

Re: Opening Epiphany-Browser in Fullscreen for Kiosk

First tried by entering following options

Code: Select all

<application name="epiphany*">
	<decor>no</decor>
	<fullscreen>yes</fullscreen>
</application>
To ~/.config/openbox/lxde-rc.xml file , But failed.
Is there any other commands or settings to make epiphony full screen ?
by Navaneeth
Thu Feb 05, 2015 10:54 am
Forum: Raspbian
Topic: Kweb Suite (Minimal Kiosk Browser, omxplayerGUI)
Replies: 1545
Views: 674260

Re: Minimal Kiosk Browser

Is there any way to open epiphany browser in full screen mode?
by Navaneeth
Fri Jan 30, 2015 12:45 pm
Forum: Beginners
Topic: Wifi issues
Replies: 1
Views: 361

Re: Wifi issues

First check whether network is up when switching to your wifi network , Otherwise set up wifi , Follow this http://weworkweplay.com/play/automatica ... i-network/
by Navaneeth
Fri Jan 30, 2015 12:36 pm
Forum: Troubleshooting
Topic: Epiphany Not Playing HTML5 Video
Replies: 1
Views: 943

Re: Epiphany Not Playing HTML5 Video

Create a html file filename.html and copy below contents <!DOCTYPE html> <html> <head> <title>video</title> </head> <body> <iframe width="560" height="315" src="https://www.youtube.com/embed/vw2nTpLFof8?autoplay=1&HTML5=1" frameborder="0" allowfullscreen></iframe> </body> </html> As you can see html...
by Navaneeth
Fri Jan 30, 2015 12:26 pm
Forum: Beginners
Topic: YouTube problems
Replies: 5
Views: 1449

Re: YouTube problems

Epiphany supports HTML5 videos so you need to specify a parameter in your youtube link. In my case i created a html file as shown below and opened with this command in terminal epiphany filename.html HTML file <!DOCTYPE html> <html> <head> <title>video</title> </head> <body> <iframe width="560" heig...
by Navaneeth
Fri Jan 30, 2015 12:10 pm
Forum: Troubleshooting
Topic: screen size
Replies: 12
Views: 1620

Re: screen size

In pisignage(digital signage) framebuffer_width & framebuffer_height is set as
framebuffer_width=1280
framebuffer_height=720

Which plays my images and videos with good viewable resolution.
by Navaneeth
Fri Jan 30, 2015 6:13 am
Forum: Troubleshooting
Topic: screen size
Replies: 12
Views: 1620

Re: screen size

As explained in http://elinux.org/RPiconfig

framebuffer_width console framebuffer width in pixels. Default is display width minus overscan.

framebuffer_height console framebuffer height in pixels. Default is display height minus overscan.
by Navaneeth
Thu Jan 29, 2015 12:29 pm
Forum: Beginners
Topic: Node.js installation error
Replies: 11
Views: 2149

Re: Node.js installation error

Can you try with these commands wget http://nodejs.org/dist/v0.10.24/node-v0.10.24-linux-arm-pi.tar.gz tar -xvzf node-v0.10.24-linux-arm-pi.tar.gz sudo mkdir /opt/node sudo cp -R node-v0.10.24-linux-arm-pi/* /opt/node rm -r node-v0.10.24-linux-arm-pi sudo ln -s /opt/node/bin/node /usr/bin/node sudo ...
by Navaneeth
Thu Jan 29, 2015 12:23 pm
Forum: Beginners
Topic: Cant change resolution on monitor
Replies: 2
Views: 974

Re: Cant change resolution on monitor

Check hdmi_group and hdmi_mode options in /boot/config.txt file .
For 720p resolution make
hdmi_group=1
hdmi_mode=4


For 1080p make
hdmi_group=1
hdmi_mode=16
by Navaneeth
Thu Jan 29, 2015 12:09 pm
Forum: Beginners
Topic: Omxplayer
Replies: 3
Views: 929

Re: Omxplayer

Insert your script in init.d , Because .bashrc run only when user logs in, So follow these steps , First create a file welcomescreen file and save at /etc/init.d/ sudo vi /etc/init.d/welcomescreen And copy below contents to that file (script contains omxplayer -o hdmi filename command replace that l...
by Navaneeth
Thu Jan 29, 2015 11:43 am
Forum: Staffroom, classroom and projects
Topic: connecting to school wi-fi problems
Replies: 2
Views: 4486

Re: connecting to school wi-fi problems

If your using raspbian wheezy Open your terminal and open file /etc/wpa_supplicant/wpa_supplicant.conf sudo vi /etc/wpa_supplicant/wpa_supplicant.conf And replace the contents with following lines ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 network = { ssid="your wifi nam...
by Navaneeth
Thu Jan 29, 2015 11:09 am
Forum: Troubleshooting
Topic: screen size
Replies: 12
Views: 1620

Re: screen size

/boot/config.txt file contains parameters related to your screen 1) search and uncommnet(remove # ) #disable_overscan=1 disable_overscan=1 2) uncommnet all overscan left , right ,up top , bottom entries (remove # sign) Else runbelow commands (replace 40,20 with your values ) sudo sed 's/.*disable_ov...
by Navaneeth
Thu Jan 29, 2015 5:23 am
Forum: General discussion
Topic: pisignage - Launching raspberry pi digital signage for all
Replies: 3
Views: 1467

Re: pisignage - Launching raspberry pi digital signage for a

In omxplayer is there a way to bring audio output on audio jack? sudo amixer cset numid=3 0 # auto sudo amixer cset numid=3 1 # analog TRRS jack sudo amixer cset numid=3 2 # HDMI http://elinux.org/R-Pi_Troubleshooting#Sound_does_not_work_at_all.2C_or_in_some_applications Thank you for the quick rep...
by Navaneeth
Wed Jan 28, 2015 5:22 am
Forum: General discussion
Topic: pisignage - Launching raspberry pi digital signage for all
Replies: 3
Views: 1467

Re: pisignage - Launching raspberry pi digital signage for a

In omxplayer is there a way to bring audio output on audio jack?

Go to advanced search