Go to advanced search

by sora03
Tue Oct 16, 2018 10:28 am
Forum: Beginners
Topic: Raspberry Pi and Stunnel
Replies: 3
Views: 282

Re: Raspberry Pi and Stunnel

I do not know if Pi has UFW installed,if it is to turn it off for testing. Use sudo ufw disable
by sora03
Sun Oct 14, 2018 1:17 am
Forum: Networking and servers
Topic: Pi 3 as wiireless client and wireless AP?
Replies: 193
Views: 124735

Re: Pi 3 as wiireless client and wireless AP?

I have a raspberry PI with two virtual interfaces and one onboard interface, i have configure vlan on both virtual interface . i have an access point connected to the same switch with the raspbery PI but i am unable to ping the raspberry pi the AP is configured in the same ip rang of one of the vir...
by sora03
Sun Oct 14, 2018 12:53 am
Forum: Troubleshooting
Topic: pihole dns not working
Replies: 7
Views: 628

Re: pihole dns not working

droidus wrote:
Sat Oct 13, 2018 12:10 am
Yes. It is actively ad blocking.
and "flushall" does not do anything in windows 10.
could it be related to an Ipv6 in the win10?
by sora03
Sun Oct 14, 2018 12:50 am
Forum: Off topic discussion
Topic: how to make live streaming of video in my android phone through wifi
Replies: 3
Views: 1565

Re: how to make live streaming of video in my android phone through wifi

If you want to stream video only then use the Motion it is a CCTV live monitoring software. It can be installed in Pi and you just need a Camera source, the official Pi cam or a USB webcam. To stream it just visit your PI's IP address and motion port to a browser and it will show you the live feed.
by sora03
Fri Oct 12, 2018 1:23 pm
Forum: Networking and servers
Topic: https access
Replies: 5
Views: 481

Re: https access

I have Installed the apache2 server. I am using as a local server. In that, I should provide https access. can you please help me. If you are just going to use LAN for https access then this will not work, you cannot issue a Let's encrypt free SSL if for LAN use. You may want to just self-sign your...
by sora03
Fri Oct 12, 2018 1:21 pm
Forum: Networking and servers
Topic: url redirect to ip
Replies: 3
Views: 641

Re: url redirect to ip

Thanks, will try this. Will this slow down browsing experience for users on the network in any way? You may also want to try Pi-hole, it is a DNS level ad-blocking system, it requires you to make the Pi as the DNS server so you can set the IP address as hostname for local network. If the Pi is powe...
by sora03
Fri Oct 12, 2018 1:17 pm
Forum: Troubleshooting
Topic: pihole dns not working
Replies: 7
Views: 628

Re: pihole dns not working

Did you change your Router's DNS server to point to the PI-hole IP address? If you routers DNS address is 192.168.1.1 and your Pi-hole's IP address is 192.168.1.4 then you need to change your Router's DNS to 192.168.1.4. If you do not want to set it at the router level then just change your Windows ...
by sora03
Fri Oct 12, 2018 1:11 pm
Forum: Troubleshooting
Topic: [Raspbian 9 (stretch)] Is opencv installed by default ? If so how do you use it!
Replies: 5
Views: 713

Re: [Raspbian 9 (stretch)] Is opencv installed by default ? If so how do you use it!

if you are using python then install opencv with pip:

Code: Select all

$ pip install opencv-python
by sora03
Thu Oct 11, 2018 11:52 pm
Forum: Troubleshooting
Topic: Have I burned my Pi
Replies: 6
Views: 398

Re: Have I burned my Pi

Hi, i have rawsberry Pi 3 model B - I installed it successfully once using noobs hdmi disply and combined mouse/keybord with dongle. Evrithing worked fine until I tried to install the camera. I shut it all down with the menu, inserted the ribon cable to the camera slot and rerun the system on. the ...
by sora03
Thu Oct 11, 2018 11:43 pm
Forum: Troubleshooting
Topic: RPi internal usb hub not working
Replies: 12
Views: 615

Re: RPi internal usb hub not working

The polyfuse blows after 6v, so applying 5.5v won't blow it. You might be able to use the Pi in a headless set up, but being a Pi2b without WiFi and having both USB and ethernet not working, well... But that temperature, if accurate... Should mean your Pi's SOC will shortly die and is the part you ...
by sora03
Thu Oct 11, 2018 12:53 am
Forum: Troubleshooting
Topic: RPi internal usb hub not working
Replies: 12
Views: 615

Re: RPi internal usb hub not working

If anyone is interested in the error messages, I have posted a screen shot of it. at https://z.awsmppl.com:8443/pics/pi2err/index.html or just see them below: https://z.awsmppl.com:8443/pics/pi2err/mid/mid_MII.jpg https://z.awsmppl.com:8443/pics/pi2err/mid/mid_OVHT.jpg https://z.awsmppl.com:8443/pic...
by sora03
Wed Oct 10, 2018 11:30 pm
Forum: Beginners
Topic: ADC in python, change sampling time
Replies: 2
Views: 208

Re: ADC in python, change sampling time

I have no experience with that ADC, Try to add a filtering capacitor, a 0.1uF ceramic to the input channel of the ADC to smooth out the ripples.
by sora03
Wed Oct 10, 2018 11:26 pm
Forum: Troubleshooting
Topic: Can't create snapshot with motion
Replies: 1
Views: 295

Re: Can't create snapshot with motion

you shoudl not modify the entire motion.conf , leave the commented entries commented unless you need to use them, comments are in ; and # it might be wise if you create a file for your camera, eg. /etc/motion/camera1.conf and add that to the motion.conf at the end of the file: camera /etc/motion/cam...
by sora03
Wed Oct 10, 2018 10:51 pm
Forum: Troubleshooting
Topic: Strange Wifi connection issue
Replies: 5
Views: 374

Re: Strange Wifi connection issue

I do not get it, can you please post a screenshot?

how do you connect the Pi to the network?
networkmanager-cli?
wicd-client?
by sora03
Wed Oct 10, 2018 10:46 pm
Forum: Troubleshooting
Topic: Worst web surfing experience with Strecht
Replies: 20
Views: 1301

Re: Worst web surfing experience with Strecht

If you are going to browse youtube, just use the mps-youtube in python. It is a command line interface but will work without any trouble. For facebook messenger use the fb-messenger-cli python package it is also a command line interface so your RAM should not be full. Putting the root FS to a USB SA...
by sora03
Sun Sep 09, 2018 6:09 am
Forum: Troubleshooting
Topic: RPi internal usb hub not working
Replies: 12
Views: 615

Re: RPi internal usb hub not working

the usb keyboard is working but usb flash drive/wifi adapters do not. i can still watch using kodi.
by sora03
Sun Sep 09, 2018 12:04 am
Forum: Troubleshooting
Topic: RPi internal usb hub not working
Replies: 12
Views: 615

Re: RPi internal usb hub not working

so what can I do with a Pi that has a broken USB/eth and GPIO pins?
by sora03
Wed Sep 05, 2018 10:25 am
Forum: Troubleshooting
Topic: RPi internal usb hub not working
Replies: 12
Views: 615

Re: RPi internal usb hub not working

i left it unpowered for a night and the usb smsc9xx is now being detected on boot. lsusb but I cannot power an external hdd which the pi reboots after 2 minutes of uptime
by sora03
Sun Sep 02, 2018 8:10 am
Forum: Troubleshooting
Topic: RPi internal usb hub not working
Replies: 12
Views: 615

RPi internal usb hub not working

Hi, I am having problems with my RPi 2B v1.1 the SMSC/lan9512 chip? Internal USB Hub is not working at all, error when booting: new high speed usb device number 2 using dwc_otg indeed it is in host mode hprt0 00001101 usb 1-1: device descriptor read/64, error -71 ... another usb device number 3 ... ...
by sora03
Tue Jun 26, 2018 12:52 pm
Forum: Networking and servers
Topic: My RPI cause interfere other wifi clients
Replies: 5
Views: 553

Re: My RPI cause interfere other wifi clients

No, it's in a plastic box. I must mention that not hotspot, not wifi is enabled in our RPI but still it interfere the other connected devices via WIFI (in the same network) what do you mean by interference? try to switch off the onboard Wifi may solve the issue? try to also put the Pi in a metal co...
by sora03
Tue Jun 26, 2018 12:48 pm
Forum: Troubleshooting
Topic: GPIO pins are dead?
Replies: 2
Views: 624

GPIO pins are dead?

Troubleshooting part is done but I still do not know how all of my GPIO pins are dead. I have a RPi 2B, i2c peripherals DS3231 and BMP180, SPI MCP3002 with MQ2. 2 LEDs with 100 ohm and 2 LEDs with 150 ohm resistors. 2 Buttons with 10K and 1K resistors connected to 3v3 and a GPIO pin. It just stopped...
by sora03
Mon Jun 25, 2018 11:22 am
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: i2c setup problems: not working but no errors
Replies: 2
Views: 273

Re: i2c setup problems: not working but no errors

Hi, i have the same problem too. It started this morning, I was able to read BMP180 and MQ2 MCP3002 but now I cannot read anything. RPi 2B + 4.9.80 kernel. I also rewired the SDA/SCL/COM/3V3 but still not working, it was working yesterday for 365 days. I did an apt-get upgrade but it is not relevant...
by sora03
Mon Jun 25, 2018 2:52 am
Forum: Networking and servers
Topic: RTL8812AU driver - Raspbian Stretch
Replies: 2
Views: 1550

Re: RTL8812AU driver - Raspbian Stretch

I had bad experiences with realtek dongles so I avoid them entirely. You can check the chipset by yourself by executing this in shell (terminal emulator): $ sudo lsusb $ sudo iw list $ sudo lsmod|grep rtl lsusb should show the wifi manufacturer/model name: eg. Bus 001 Device 009: ID 148f:1070 Ralink...
by sora03
Mon Jun 25, 2018 2:47 am
Forum: Networking and servers
Topic: Pi 3 as wiireless client and wireless AP?
Replies: 193
Views: 124735

Re: Pi 3 as wiireless client and wireless AP?

so, does this work for 3B and 3B+, I'd like to know before buying one Yes if set up on a fresh install, but also consider yourself warned about speed and reliability. Edit: These shortcomings will be most noticeable when streaming videos like YouTube. good to know them, I do not care about the spee...
by sora03
Sat Jun 23, 2018 1:09 pm
Forum: Networking and servers
Topic: Need help setting up ovpn on raspbian stretcH
Replies: 4
Views: 950

Re: Need help setting up ovpn on raspbian stretcH

Look here: http://www.pivpn.io/ I'm using this on a pi zero and it works great. I've tried this as well but no luck. What i've noticed is that the build dh script is quitting randomly while the keys are being generated, the period varies between 30seconds to 30 minutes. There is no confirmation tha...

Go to advanced search