Go to advanced search

by texy
Thu Feb 22, 2018 1:27 pm
Forum: General discussion
Topic: Xbox 360 PSU
Replies: 9
Views: 263

Re: Xbox 360 PSU

What is the rating of 360 PSU 12V line? If there is plenty of spare 'juice', then maybe consider a UBEC, eg
https://www.modmypi.com/raspberry-pi/po ... -converter

Texy
by texy
Thu Feb 22, 2018 1:24 pm
Forum: General discussion
Topic: Unable to install 2.8 inches adafruit pitft touchscreen on my raspberry pi 3 model B(raspbian stretch os)
Replies: 2
Views: 82

Re: Unable to install 2.8 inches adafruit pitft touchscreen on my raspberry pi 3 model B(raspbian stretch os)

Hi, you certainly shouldn't need to use a custom kernel as per the beginning of that tutorial . Start off with a fresh new latest version of raspbian, then continue the tutorial from Edit /boot/config.txt with sudo nano /boot/config.txt and add the following lines at the end: [pi1] device_tree=bcm27...
by texy
Mon Feb 19, 2018 9:44 am
Forum: Troubleshooting
Topic: RPI touchscreen dead column
Replies: 2
Views: 73

Re: RPI touchscreen dead column

Hi and welcome to the forum.
Which touchscreen - the official Raspberry Pi 7" touchscreen?

Texy
by texy
Mon Feb 05, 2018 7:49 am
Forum: General discussion
Topic: Best analog read workaround?
Replies: 1
Views: 133

Re: Best analog read workaround?

Locking - you already have a thread on the subject here
viewtopic.php?f=63&t=204477&p=1268628#p1268628

Texy
by texy
Fri Feb 02, 2018 10:57 am
Forum: Java
Topic: JavaFX: Cannot open display problem
Replies: 13
Views: 1120

Re: JavaFX: Cannot open display problem

still error is persisting with my application and it is not running pleasse help Advice in these forums is provided by unpaid volunteers. Maybe noone with the necessary interest, skills or knowledge has logged in during the 19 minutes since you first raised this query. To improve your chances of a ...
by texy
Fri Feb 02, 2018 7:28 am
Forum: General discussion
Topic: octoprint exceeding cpu power of old pi B ?
Replies: 7
Views: 478

Re: octoprint exceeding cpu power of old pi B ?

I really don't understand why you are ranting here. I deleted your last post on grounds of profanity - we do not accept bad language on these forums. 3D printing is a black art, and it may not be due to octoprint at all, but if you are convinced it is, I suggest you voice your concerns here : https:...
by texy
Fri Feb 02, 2018 7:17 am
Forum: Python
Topic: Best way to program python on Raspberry pi?
Replies: 17
Views: 739

Re: Best way to program python on Raspberry pi?

Hi there , I'm new to raspberry pi and would like to install python on it. Any ideas how? Have installed NOOBS and got a 32 GB SD card. Help would be greatly appreciated. Thx Raspbian comes pre installed with python 2 and 3, so select Raspbian via NOOBS and you'd be ready to go. Texy
by texy
Fri Feb 02, 2018 7:15 am
Forum: Off topic discussion
Topic: How stable is Kodi on XBOX One ?
Replies: 3
Views: 701

Re: How stable is Kodi on XBOX One ?

Recently when officially Kodi Official released Kodi for XBox One. I have not yet installed it but there has been rumors that it aint stable yet and that there are problems in installing. I found this guide for xbox one kodi and looks fine , but I have not yet installed as I dont want my device to ...
by texy
Wed Jan 31, 2018 8:21 am
Forum: Troubleshooting
Topic: Raspberry Pi 3b Severe overheat
Replies: 5
Views: 260

Re: Raspberry Pi 3b Severe overheat

I'm cross posting this, because I think I posted in the wrong section of the forum. Was setting up Pi 3 for PiGrrl 2 kit. Got retropie on the old sd card, and wanted to run the tried and true apt-get upgrade command. It ran fine, and then a little thermometer popped up in the top right. "Overheatin...
by texy
Fri Jan 26, 2018 4:12 pm
Forum: General discussion
Topic: Brewery
Replies: 64
Views: 17293

Re: Brewery

Did you mean to post the same image 3 times?
by texy
Thu Jan 25, 2018 1:35 pm
Forum: Beginners
Topic: Connecting 5 white LEDs to raspberry pi for remote on/off
Replies: 17
Views: 748

Re: Connecting 5 white LEDs to raspberry pi for remote on/off

Hi. I have coonected all the components and tried to run this piece of code to light the led. But it doesn't lit up. I have connected base of npn222 transistor to GPIO21 and ground to last pin 40 (Ground ) Please take a look and help me . import RPi.GPIO as GPIO GPIO.setmode(GPIO.BOARD) GPIO.setup(...
by texy
Wed Jan 17, 2018 12:17 pm
Forum: Official Foundation Display
Topic: SOLVED - Official 7" Touchscreen
Replies: 6
Views: 608

Re: Official 7" Touchscreen

The title regards the touchscreen, but it'sprobably unrelated - to prove it, you could disconnect it and use tv/monitor...
Texy
by texy
Tue Jan 16, 2018 3:24 pm
Forum: General discussion
Topic: gpio working incorrect
Replies: 2
Views: 152

Re: gpio working incorrect

Hi and welcome to the forum.
Why do you think it is working incorrectly? You will probably find that this is the correct method for your particular relay board (ie inverted logic) - do you have a link to this product?
Texy
by texy
Mon Jan 15, 2018 3:20 pm
Forum: Troubleshooting
Topic: Linux Kernel Cross Compiling
Replies: 3
Views: 219

Re: Linux Kernel Cross Compiling

I deleted your other post asking the same question- please don't duplicate posts.
Thank you.
Texy
by texy
Mon Jan 15, 2018 3:18 pm
Forum: Troubleshooting
Topic: Bluez5.x doesn't work
Replies: 6
Views: 1594

Re: Bluez5.x doesn't work

That looks good. I'm afraid I don't have experience with OBDII devices. I'll try with a Bluetooth serial connection on Jessie and see if I can figure anything out. Finally, I figure it out !!! If you don't tell the bluetooth what to do, the connection will be lost but if you manual connected rfcomm...
by texy
Mon Jan 15, 2018 7:44 am
Forum: General discussion
Topic: New EP music-album entirely on the Raspberry Pi
Replies: 7
Views: 424

Re: New EP music-album entirely on the Raspberry Pi

If only someone could find the rare limited edition "Ursula (part 1)" ;)

Texy
by texy
Thu Jan 11, 2018 10:17 am
Forum: General discussion
Topic: PIR and Camera
Replies: 3
Views: 199

Re: PIR and Camera

Indentation is vital with python. Please use the code tags so the forum retains formatting. You don't say what doesn't work about close, but it's the counterpart to the "camera =Picamera()" constructor. As the constructor is before the while loop, the close should be after it (and therefore never e...
by texy
Mon Jan 08, 2018 12:58 pm
Forum: Raspbian
Topic: Start with Rasbian
Replies: 3
Views: 229

Re: Start with Rasbian

Hi,
1.. https://www.raspberrypi.org/downloads/raspbian/
2.. https://www.raspberrypi.org/documentati ... /README.md
3.. It's a personal choice- you'll get many answers
4.. n/a for me

Hope this helps,
Texy
by texy
Sat Jan 06, 2018 5:55 pm
Forum: Official Foundation Display
Topic: New Display - Cursor Jumps and Clicks all over the place
Replies: 20
Views: 5376

Re: New Display - Cursor Jumps and Clicks all over the place

This thread and subforum only concern the official display.
I suggest you start a new thread on troubleshooting and give more detail then you have so far - make and actual display type, which os you are using, etc
Texy
by texy
Thu Nov 23, 2017 10:15 am
Forum: Raspberry Pi Desktop for PC and Mac
Topic: Dell fan control on epd-x86-jessie
Replies: 2
Views: 401

Re: Dell fan control on epd-x86-jessie

dcrand wrote:
Wed Nov 22, 2017 8:25 pm
Hello I have epd-x86-jessie installed on a Dell Dimension 4600 is there any way to control the fan it's running full speed all the time.
You've come to a raspberry pi forum to ask this question :roll:
by texy
Tue Nov 14, 2017 2:55 pm
Forum: Media centres
Topic: Terrarium For Kodi on my Raspberry
Replies: 3
Views: 2063

Re: Terrarium For Kodi on my Raspberry

Nope, not in this case. It's a banned piracy add-on and you'll just be told that no support is offered for it. It's on the banned add-ons and repos list . Team Kodi do not encourage, condone or support piracy or the use of illegally sourced media. And as such we will not discussion it here either.....
by texy
Wed Nov 08, 2017 3:27 pm
Forum: Other
Topic: Ubuntu 14.04 (trusty) Raspberry Pi 2 image
Replies: 238
Views: 125939

Re: Ubuntu 14.04 (trusty) Raspberry Pi 2 image

Hello everyone, I have uploaded mentioned Raspberry Pi 2 image, but monitor shows colorful screen, board LEDs act like board tries to bootload but it can't. There is no problem neither with SD card, no with RPi2 board ( Rasbian Jessie is uploading succesfully.) So I am curious, what may be wrong an...
by texy
Wed Nov 08, 2017 3:23 pm
Forum: General discussion
Topic: Introduction
Replies: 1
Views: 199

Re: Introduction

There an intro thread for those kind of posts ;)
viewtopic.php?f=63&t=319
Texy
by texy
Tue Nov 07, 2017 3:28 pm
Forum: The MagPi
Topic: Issue 40, Unable to find STLs for Zer0bot
Replies: 1
Views: 1640

Re: Issue 40, Unable to find STLs for Zer0bot

I know this was a while ago, but I found this via google :
https://www.thingiverse.com/thing:2352440

Texy

Go to advanced search