Go to advanced search

by pasivnyprijem
Thu Dec 04, 2014 5:16 pm
Forum: Troubleshooting
Topic: id "1" respawning to fast: disabled for 5 minutes
Replies: 8
Views: 1310

Re: id "1" respawning to fast: disabled for 5 minutes

SCA=> have tried badblock (nothing found) also did fsck and run it on startup as well got "clean" but the issue presist also geting sometimes "segmentation fault" error everything is showing on disk error but cant prove it?!
by pasivnyprijem
Thu Dec 04, 2014 6:43 am
Forum: Troubleshooting
Topic: id "1" respawning to fast: disabled for 5 minutes
Replies: 8
Views: 1310

Re: id "1" respawning to fast: disabled for 5 minutes

thanks sco is there any way how to check if the partition is corrupt? For example:
$ sudo badblocks -v /dev/hda1 > bad-blocks
by pasivnyprijem
Wed Dec 03, 2014 7:55 pm
Forum: Troubleshooting
Topic: id "1" respawning to fast: disabled for 5 minutes
Replies: 8
Views: 1310

Re: id "1" respawning to fast: disabled for 5 minutes

this is what I was reading about but if there would be a type or error I assume it would be from the start and not after hours / days, or?
by pasivnyprijem
Wed Dec 03, 2014 7:20 pm
Forum: Troubleshooting
Topic: id "1" respawning to fast: disabled for 5 minutes
Replies: 8
Views: 1310

id "1" respawning to fast: disabled for 5 minutes

Hi Experts Im having an issue wanted to build something like a weather station from my pi. So I have 2 dallas sensors and one photo cell connected to the pi. I have a python script that runs every 15 minutes and writes the data in a mysql database. My raspbery does not run from the SD card but I mov...
by pasivnyprijem
Tue Sep 23, 2014 8:02 am
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: How to wire a Raspberry Pi to a Sainsmart 5v Relay Board
Replies: 88
Views: 255309

Re: How to wire a Raspberry Pi to a Sainsmart 5v Relay Board

thanks richard dont think that should be the best way :) I was thinking that the GPIO is not providing enough power for the NPN but I measured it as well its providing 3.3V so the only idea is that NPN's are defect (but all 4 pcs?) or Im using the wrong NPN's 2N2222A and its not switching correctly ...
by pasivnyprijem
Mon Sep 22, 2014 6:49 pm
Forum: Interfacing (DSI, CSI, I2C, etc.)
Topic: How to wire a Raspberry Pi to a Sainsmart 5v Relay Board
Replies: 88
Views: 255309

Re: How to wire a Raspberry Pi to a Sainsmart 5v Relay Board

Hi Folks Im dead already, I did the wiring the 5v and ground I got from an external USB (5v). NPN trasistor I used is 2N2222A and the fun comes when I want to activate the relay the control led on the relay turns weakly on and nothing happens. No idea whats going on anybody its like the NPN would so...
by pasivnyprijem
Wed Sep 10, 2014 7:18 am
Forum: Python
Topic: Python with dallas temp and photocell sensors
Replies: 2
Views: 993

Python with dallas temp and photocell sensors

Hi Im readin values from 2 dallas temp sensors and one photocell and writing this data to a mysql database. The issue is when I run the script after a while it crashes with the error: Traceback (most recent call last): File "thermo.py", line 92, in <module> print insert_data() File "t...

Go to advanced search