Raspberry Pi Forums

trlaing

Hello, Just recently I have noticed that when I use VNC Viewer to connect to my Raspberry Pi 3, the LXTerminal does not appear to be loading the .bashrc settings - the prompt is just $ and none of the aliases work. It looks like shown in "VNC Viewer LXTerminal" in the VNC Viewer window. However, whe...

trlaing

Or maybe not! The next boot was unsuccessful, no screen output or green LED flashes, nothing. I'm going to put it down to a faulty mSata / controller board and give up with this Pi Desktop and go back to MicroSD cards! The Pi Desktop isn't much use for this RPi anyway as it is "always-on" with a job...

trlaing

My next step was to try writing the image to the mSata drive using Win32 Disk Imager instead of balenaEtcher… Success! Rainbox box when powered on and now booting to the mSata with no MicroSD card installed. I do remember having a problem with an image written using balenaEtcher a while back... mayb...

trlaing

II have installed testdisk on the RPi3 and have the following information on the mSata drive: TestDisk 7.0, Data Recovery Utility, April 2015 Christophe GRENIER <grenier@cgsecurity.org> http://www.cgsecurity.org Disk /dev/sda - 32 GB / 29 GiB - CHS 30533 64 32 Current partition structure: Partition ...

trlaing

Thank you for your reply. I'm currently flashing "2019-04-08-raspbian-stretch-full.img" onto the mSata and will update this post once I've tried booting to it... I wanted to get the RPi3 upgraded to Buster, but will try Stretch in case this is causing issues. Nope, just the same with the Stretch ima...

trlaing

Hello, I have the following computer system: Raspberry Pi 3 Pi Desktop Some generic cheap 32GB mSata bought from eBay Official white Raspberry Pi 2.5A power supply (It is set to boot to the mSata with no MicroSD card installed) This computer was working fine, until recently I was having occasional t...

trlaing

After the firmware update, my RPi4 seems to sit around 57-58 deg C when idle (without desktop running). Before it was around 67-68 deg C. Room temperature is around 22 deg C. I bought a the Pimoroni Fan Shim before the firmware update and it was on and off all the time. Now it hardly comes on (set t...

trlaing

What about playing Roblox on a Raspberry Pi 4... I'm slightly irritated that I had to upgrade my child's laptop to Windows 10 so they could play it on that rather than their tablet. I'd like them to use non-closed source devices and learn using one of the many Raspberry Pis I have.

trlaing

Hi guys, Quite some time ago I set up on of my Raspberry Pis (mobel 3b+) at my work to automate various tasks. To increase reliability, I decided to use a Kingston SSD I had lying around to boot and run from instead of the MicroSD card. I used one of the USB3.0 SATA adaptors bought from Pimoroni (pr...

trlaing

Thanks for the advice. I'll look into these options.

trlaing

Thank you for your reply. I'm pretty sure I tried "umount -f" and it was unsuccessful. I like the sound of automount... So, can I add the x-automount parameter to the mount command? I have not been mounting using fstab as the laptop is shut down every night, but the Raspberry Pi is always on. I actu...

trlaing

Hello I have my Raspberry Pi 3b+ connected to a laptop's hard drive folder using the mount command: mount -t cifs //laptop/Documents /mnt/folder -o user="My Name",pass=password I can mount and unmount this drive perfectly well. I unmount using: sudo umount /mnt/folder However, if the laptop is shutd...

trlaing

Nope, don't have a microwave, use bluetooth, cordless phones or have wifi switched on on any devices when not required. We do try to be quite thorough. I'm sure that some radiation leaks in, but everything we have switched off helps reduce it. The tinfoil hat helps a bit too, but a Faraday cage woul...

trlaing

One opinion says it is dangerous, another says it isn't. I'd rather be safe than sorry. Of course there is going to be no published evidence of it being dangerous as all the BIG companies are selling it. I wasn't really hoping for a debate over the dangers of wifi or cellphone radiation, but was hop...

trlaing

Hello For some time now I have been concerned with the dangers of Wifi radiation, particularly on children. I currently use an old Buffalo wireless access point with DD-WRT firmware tweaked to lower the radiation and set to switch off at night. It is plugged into our BT Hub which has its super stron...

trlaing

Okay, the instructions I followed didn't work, so I found another similar web page that works!

https://github.com/google/aiyprojects-r ... HACKING.md

I now have a free, working audio device for my RPi2, thanks MagPi!

trlaing

I'm still hoping for some help with this one. I have further information. Devices: Raspberry Pi 2 Official Touchscreen Google AIY Voice HAT OS image: 2017-11-29-raspbian-stretch.img Aim: To use the Voice HAT only as a sound card / audio device with speaker. I followed the following instructions from...

trlaing

Nope, doesn't work. No sound through the Voice HAT speaker

Any ideas anyone?...

trlaing

I might have found what I am looking for after searching the internet for ages!

https://github.com/google/aiyprojects-r ... and-config

I'll report back once I've tried it...

trlaing

Okay, next question! I have the Google AIY Voice HAT connected and would like to use it just as a sound output device for my Raspberry Pi 2 / Touchscreen setup. Without using the Google AIY SD card image, I cannot find out how to use it simply as an audio output device. Does anyone know a quick/simp...

trlaing

Excellent, many thanks. I think it would be best as I am having issues with this Raspberry Pi corrupting SD cards, so supplying plenty power might help.

trlaing

Hello :-) I would like to use my Voice HAT with my Raspberry Pi 2 with official touchscreen, but as the Voice HAT uses all the GPIO pins on the Raspberry Pi I cannot connect the screen's circuit board to to the Raspberry Pi to power it. I notice that the Voice HAT has +5V, +3.3V and GND solder point...

trlaing

Hello I have various Raspberry Pis that I use at my work and home. One in particular is a Raspberry Pi 2 with official touchscreen that I have a lot of trouble with the MicroSD cards getting corrupted. I noticed that the cable of the official Raspberry Pi 2.5 A power supply was damaged recently, so ...

trlaing

scotty101 wrote: ↑
Thu Aug 17, 2017 8:46 am
SQLite?

https://docs.python.org/2/library/sqlite3.html

Has worked for me for some relatively simple applications.

Excellent, many thanks. It looks like sqlite3 is already available in the standard library too. I'll have a try later. Much appreciated

trlaing

Hello I am looking for a lightweight database to use with a Python 3 application I am writing to provide notifications for items sold on eBay. The program will get the product code for a sale using the eBay API, then look up a database to get information about the product code from the database (so ...

Search found 104 matches

VNC Viewer LXTerminal not loading bashrc Raspbian Buster

Re: Raspberry Pi 3 Pi Desktop no longer boots to mSata USB

Re: Raspberry Pi 3 Pi Desktop no longer boots to mSata USB

Re: Raspberry Pi 3 Pi Desktop no longer boots to mSata USB

Re: Raspberry Pi 3 Pi Desktop no longer boots to mSata USB

Raspberry Pi 3 Pi Desktop no longer boots to mSata USB

Re: Raspberry Pi 4 temperature

Re: roblox

Raspberry Pi 3b+ boot from USB SATA SSD

Re: Raspbian freezes when trying to unmount or remount lost network drive

Re: Raspbian freezes when trying to unmount or remount lost network drive

Raspbian freezes when trying to unmount or remount lost network drive

Re: Raspberry Pi 3B+ Eco Wifi Hotspot Access Point Low Radiaton

Re: Raspberry Pi 3B+ Eco Wifi Hotspot Access Point Low Radiaton

Raspberry Pi 3B+ Eco Wifi Hotspot Access Point Low Radiaton

Re: Raspberry Pi 2 / Official Touchscreen / Voice HAT

Re: Raspberry Pi 2 / Official Touchscreen / Voice HAT

Re: Raspberry Pi 2 / Official Touchscreen / Voice HAT

Re: Raspberry Pi 2 / Official Touchscreen / Voice HAT

Re: Raspberry Pi 2 / Official Touchscreen / Voice HAT

Re: Raspberry Pi 2 / Official Touchscreen / Voice HAT

Raspberry Pi 2 / Official Touchscreen / Voice HAT

Scheduled image backup

Re: Lightweight database for Python 3 application

Lightweight database for Python 3 application