Go to advanced search

by ngocphamm
Sat Mar 29, 2014 1:48 am
Forum: Troubleshooting
Topic: Ralink 2870/3070 USB Wifi Dongle Not working. [FIXED!]
Replies: 20
Views: 26491

Re: Ralink 2870/3070 USB Wifi Dongle Not working. [FIXED!]

I was able to enable the interface using this help: http://www.raspberrypi.org/forum/viewto ... 82#p462982

Thanks all! :)
by ngocphamm
Sat Mar 29, 2014 1:25 am
Forum: Troubleshooting
Topic: Ralink 2870/3070 USB Wifi Dongle Not working. [FIXED!]
Replies: 20
Views: 26491

Re: Ralink 2870/3070 USB Wifi Dongle Not working. [FIXED!]

I think that I got a wrong dongle or something. It appears in the `sudo dmesg` as the following. [ 3.219839] usb 1-1.3: new high-speed USB device number 4 using dwc_otg [ 3.341221] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0179 [ 3.357532] usb 1-1.3: New USB device strings: Mfr=1, Pr...
by ngocphamm
Fri Mar 28, 2014 9:50 pm
Forum: Troubleshooting
Topic: Ralink 2870/3070 USB Wifi Dongle Not working. [FIXED!]
Replies: 20
Views: 26491

Re: Ralink 2870/3070 USB Wifi Dongle Not working. [FIXED!]

Hi, Does it mean that I only have to run "sudo rpi-update" to get the latest firmware and this USB dongle will be automatically recognized without any further steps listed on the first post? The dongle is from eBay: http://www.ebay.com/itm/181207053210?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2...
by ngocphamm
Thu Mar 20, 2014 2:56 pm
Forum: Troubleshooting
Topic: SD card starting to bend
Replies: 32
Views: 12689

Re: SD card starting to bend

What brand cards are people using? I only tend to use SanDisk and Kingston from major retailers. Never eBay. I've never had any problems with either the cards or the slot. I can't really see how the pins in the SD card slot could cause that sort of bending. My money is on an SD card quality issue. ...
by ngocphamm
Thu Mar 20, 2014 5:43 am
Forum: Troubleshooting
Topic: SD card starting to bend
Replies: 32
Views: 12689

Re: SD card starting to bend

Just got my SD card having exactly this problem. If I use my finger to push down the card, the Pi will boot up. Otherwise, it won't, or it will be very unstable leading to I/O problem. Is there anyway to prevent this? I used my Pi for almost nothing than being a ZNC bouncer for now.

Go to advanced search