Go to advanced search

by trbennett48
Fri Aug 23, 2019 4:49 am
Forum: General discussion
Topic: Stream Raspberry Camera
Replies: 4
Views: 503

Re: Stream Raspberry Camera

This project could be just what you want... https://elinux.org/RPi-Cam-Web-Interface
by trbennett48
Wed Feb 11, 2015 8:55 pm
Forum: Networking and servers
Topic: How to setup RPI to bridge ethernet & Wifi
Replies: 9
Views: 9763

Re: How to setup RPI to bridge ethernet & Wifi

The problem I have with ebtables is that you have to set up a rule for EVERY ethernet device that uses the PI's ethernet to access the ethernet. That is disconcerting to me, because I was going to use the PI to replace a WET640N Linksys WIFI bridge that I've used for 9 years... It worked without nee...
by trbennett48
Wed Feb 11, 2015 8:40 am
Forum: Networking and servers
Topic: How to setup RPI to bridge ethernet & Wifi
Replies: 9
Views: 9763

Re: How to setup RPI to bridge ethernet & Wifi

This Debian Bridge setup link
https://wiki.debian.org/BridgeNetworkCo ... reless_NIC
seems to indicate that for a Wireless NIC it is necessary to install and run "ebtables" ...
... and configure rules for each ethernet device being bridged.

Do I understand this correctly???
by trbennett48
Wed Feb 11, 2015 6:33 am
Forum: Networking and servers
Topic: How to setup RPI to bridge ethernet & Wifi
Replies: 9
Views: 9763

Re: How to setup RPI to bridge ethernet & Wifi

Still having no joy... Based upon various posts, I have modified the /etc/network/interfaces to contain the following: auto lo iface lo inet loopback iface eth0 inet manual auto wlan0 iface wlan0 inet manual auto br0 iface br0 inet dhcp bridge_ports wlan0 eth0 bridge_stp off bridge_fd 0 bridge_waitp...
by trbennett48
Sun Feb 08, 2015 5:06 am
Forum: Networking and servers
Topic: How to setup RPI to bridge ethernet & Wifi
Replies: 9
Views: 9763

How to setup RPI to bridge ethernet & Wifi

My RPI currently uses WIFI to connect to the internet via a Wireless Router. I would like to use my RPI to act as a bridge for some other devices that only have Ethernet networking capability. I've read some other RPI Bridge postings, but it appears most work the other way around, i.e. use the RPI a...
by trbennett48
Mon Feb 10, 2014 9:53 pm
Forum: C/C++
Topic: Cannot write data to serial port (reading works fine)
Replies: 21
Views: 13991

Re: Cannot write data to serial port (reading works fine)

Have you reviewed the "rpi" specific info contained in this link:
http://elinux.org/RPi_Serial_Connection

-tony
by trbennett48
Mon Feb 10, 2014 9:08 pm
Forum: C/C++
Topic: Problems compiling with #ifdef
Replies: 8
Views: 2683

Re: Problems compiling with #ifdef

See the following for a list of "macros" to determine the hardware architecture:

http://sourceforge.net/p/predef/wiki/Architectures/

Hope this helps,

-tony
by trbennett48
Mon Feb 10, 2014 8:52 pm
Forum: C/C++
Topic: No console on remote debugging
Replies: 3
Views: 744

Re: No console on remote debugging

You need to set STDOUT to be "unbuffered"

Check out: man setvbuf

Good luck,
-tony

Go to advanced search