Encased in amber: meet the epoxy-embedded Pi

The maker of one of our favourite projects from this year’s Maker Faire Bay Area took the idea of an ’embedded device’ and ran with it: Ronald McCollam has created a wireless, completely epoxy-encased Pi build – screen included!

Resin.io in resin epoxy-encased Raspberry Pi

*cue epic music theme* “Welcome…to resin in resin.”

Just encase…

Of course, this build is not meant to be a museum piece: Ronald embedded a Raspberry Pi 3 with built-in wireless LAN and Bluetooth to create a hands-on demonstration of the resin.io platform, for which he is a Solution Architect. Resin.io is useful for remotely controlling groups of Linux-based IoT devices. In this case, Ronald used it to connect to the encased Pi. And yes, he named his make Resin-in-resin – we salute you, sir!

resin.io in resin epoxy-encased Raspberry Pi

“Life uh…finds a way.”

Before he started the practical part of his project, he did his research to find a suitable resin. He found that epoxy types specifically designed for encasing electronics are very expensive. In the end, Ronald tried out a cheap type, usually employed to coat furniture, by encasing an LED. It worked perfectly, and he went ahead to use this resin for embedding the Pi.

Bubbleshooting epoxy

This was the first time Ronald had worked with resin, so he learned some essential things about casting. He advises other makers to mix the epoxy very, very slowly to minimize the formation of bubbles; to try their hands on some small-scale casting attempts first; and to make sure they’re using a large enough mold for casting. Another thing to keep in mind is that some components of the make will heat up and expand while the device is running.

His first version of an encased Pi was still connected to the outside world by its USB cable:

Ronald McCollam on Twitter

Updates don’t get more “hands off” than a Raspberry Pi encased in epoxy — @resin_io inside resin! Come ask me about it at @DockerCon!

Not satisfied with this, he went on to incorporate an inductive charging coil as a power source, so that the Pi could be totally insulated in epoxy. The Raspberry Pi Foundation’s Matt Richardson got a look the finished project at Maker Faire Bay Area:

MattRichardson🏳️‍🌈 on Twitter

If you’re at @makerfaire, you must check out what @resin_io is showing. A @Raspberry_Pi completely enclosed in resin. Completely wireless. https://t.co/djVjoLz3hI


The charging coil delivers enough power to keep the Pi running for several hours, but it doesn’t allow secure booting. After some head-scratching, Ronald came up with a cool solution to this problem: he added a battery and a magnetic reed switch. He explains:

[The] boot process is to use the magnetic switch to turn off the Pi, put it on the charger for a few minutes to allow the battery to charge up, then remove the magnet so the Pi boots.

Pi in resin controlled by resin.io

“God help us, we’re in the hands of engineers.”

He talks about his build on the resin.io blog, and has provided a detailed project log on Hackaday. For those of you who want to recreate this project at home, Ronald has even put together an Adafruit wishlist of the necessary components.

Does this resin-ate with you?

What’s especially great about Ronald’s posts is that they’re full of helpful tips about getting started with using epoxy resin in your digital making projects. So whether you’re keen to build your own wireless Pi, or just generally interested in embedding electronic components in resin, you’ll find his write-ups useful.

If you have experience in working with epoxy and electronic devices and want to share what you’ve learned, please do so in the comments!

Note: There’s been concern over encasing a battery in epoxy resin, so please do not try it at home – let’s leave that to Ronald.