hello,
i am trying to interface tata indicom datacard to raspberry pi board using usb port.
after connecting how to configure the modem. can any one give the steps to do that.
interfacing tata indicom cdma data card
2 posts
- Posts: 3
- Joined: Mon Dec 10, 2012 5:21 am
Hi,
To detect the data card, you need to install the driver available from tata indicom on R-Pi.
If it is successful then only you can use it.
Reg
Nanda
To detect the data card, you need to install the driver available from tata indicom on R-Pi.
If it is successful then only you can use it.
Reg
Nanda
- Posts: 3
- Joined: Sat Dec 22, 2012 4:06 pm